Mold that keeps coming back
Recurring mold is a moisture problem first. Once that's solved, we remove the affected material for good.
Serving St. Charles & nearby Geneva, West Chicago
Kitchen Mold Remediation in St. Charles, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from St. Charles kitchens.
- Serving St. Charles ZIP 60174, 60175
- Containment so the damage doesn't spread
- One team from cleanup to rebuild
Kitchen mold problems we take care of in St. Charles
Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In St. Charles we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.
Mold found during a remodel
Tear-out sometimes reveals old leak damage with growth. That gets remediated, not covered up by new drywall.
A large area of mold
Large-area mold is handled with full containment and HEPA filtration, and we may suggest independent testing beforehand.
Condensation and window mold
Mold on the sill or wall under a kitchen window often comes from condensation. We clean or replace the affected parts and look at how the room is vented.
Mold inside a wall after a leak
Stains or bubbling paint on a kitchen wall can mean moisture and growth inside. We cut it open under containment and clean the framing.
Mold behind the refrigerator
Spots on the wall behind the refrigerator usually trace to the water line. We stop it and clean or replace the drywall.
Mold under the sink with no visible leak
If mold came back after cleaning and nothing seems to drip, we look for hidden moisture with meters and run the fixtures while we watch.
Mold under the kitchen sink
The sink base is the most common place we find kitchen mold. A drain or supply drip keeps the particleboard damp, and that panel usually has to be replaced.
What we handle after the damage
- Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
- Fixing the moisture sourceThe leak, drip or condensation problem is repaired, or we tell you who needs to fix it first.
- ContainmentWe isolate the affected area so spores and dust stay inside it.
- Removing affected porous materialsMaterials mold has grown into are removed rather than cleaned.
- Cleaning what staysFraming, plywood and other solid surfaces are HEPA-vacuumed and cleaned.
- Final cleaningA detailed cleanup of the work area finishes the remediation.
- RebuildWe restore the cabinet, wall or floor that was removed.
How we dry, clean and rebuild
HEPA vacuumsCleanup equipment that holds fine dust instead of blowing it around.
Replacement panels and drywallNew cabinet bottoms, backs, drywall and insulation for what was removed.
Mold-resistant materialsMoisture-resistant drywall or plywood cabinet bottoms where it makes sense.
Containment sheetingSealed plastic walls that keep the work separate from the rest of the home.
HEPA air scrubbersAir filtration machines that capture fine particles during removal.
Kitchen Mold Remediation before and after — St. Charles homes
Problem
Fixed
DetailA St. Charles 1990s two-story colonial: before and after
A 1990s two-story colonial in St. Charles, a typical kitchen for St. Charles. Before: solid-surface integrated sink and golden-oak cabinets with oak soffits above. What bothered the owners most: mold under the kitchen sink. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant removing affected porous materials, final cleaning, plus rebuild.
Before
AfterKitchen Mold Remediation in a two-story colonial from the 1990s, Geneva
A two-story colonial from the 1990s near Mill Creek, a typical kitchen for Geneva. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. The main complaint was a swollen, spotted cabinet floor under the sink. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered inspection and moisture readings, containment, plus cleaning what stays.
Kitchen Mold Remediation in Geneva →
Before
AfterBefore and after: a 1990s two-story colonial in Batavia
A 1990s two-story colonial in Batavia, a typical kitchen for Batavia. What we started with: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. What bothered the owners most: mold under the kitchen sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant fixing the moisture source, removing affected porous materials, plus final cleaning.
Kitchen Mold Remediation in Batavia →
Before
AfterSt. Charles kitchen, 1990s two-story colonial: kitchen remodeling
Cabinets in deep olive with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a white 3x12 tile in a stacked pattern backsplash, gray wood-look porcelain plank flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in St. Charles →
Before
AfterA St. Charles 1980s two-story: before and after
Finished: the same doors sprayed in light butter yellow, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in St. Charles →Step by step after damage
- InspectA visit to assess the growth, the moisture and the plan.
- Fix the moistureThe source gets fixed first so the work lasts.
- Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
- Dry and rebuildOnce dry and clean, the kitchen is put back together.
Kitchen Mold Remediation questions from St. Charles homeowners
What affects the cost of mold remediation?
The size of the area, where it is, how much has to be removed, containment needs and the rebuild. We give a written, itemized estimate after the inspection.
Can I clean small mold spots myself?
Small surface spots on hard surfaces often can be cleaned. If it's on drywall, inside a cabinet panel or keeps returning, call us.
What's the difference between mold removal and mold remediation?
Remediation is the full process: source, containment, removal, cleaning and drying. Simply cleaning the surface is removal.
Will bleach kill mold under my sink?
On particleboard or drywall, bleach doesn't solve it. The affected material needs to come out and the leak needs fixing.
Can we stay home while you work?
For a typical kitchen job, many people stay home because the work area is contained. We tell you which areas to avoid during removal.
What is the St. Charles building department phone number?
Permits go through Building Division, Community Development, 2 E. Main St., phone (630) 377-4406. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in St. Charles?
It depends on the scope. St. Charles's rule in short: Permits required for construction, alteration, repair or demolition of any structure; major residential projects including remodels require 5 sets of drawings. We handle the permit when one is needed with Building Division, Community Development, 2 E. Main St..
Do you work in my part of St. Charles?
Yes. Our crews work across St. Charles — ZIP 60174, 60175 — and nearby Geneva, West Chicago, Batavia.
Working in St. Charles
- A lot of St. Charles kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most St. Charles homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
ZIP 60174ZIP 60175
Kitchen Mold Remediation nearby
Other kitchen services in St. Charles
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.