Mold behind the refrigerator
The space behind a fridge gets little air. A small leak there can lead to mold on drywall and flooring we remove and replace.
Serving Geneva & nearby Batavia, St. Charles
Kitchen Mold Remediation in Geneva, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Geneva kitchens.
- Crews covering Geneva ZIP 60134, 60510
- We stop the cause first, then dry, clean and rebuild
- Photos and notes you can share with your insurer
Kitchen mold problems we take care of in Geneva
Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In Geneva we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.
A large area of mold
Bigger areas need sealed containment, negative air and more careful removal. We explain the plan before we start.
Mold under the kitchen sink
Black or green spots on the cabinet floor or back panel under the sink mean moisture has been there a while. We fix the leak, remove the damaged panel and clean the cavity behind it.
Musty smell with no mold in sight
Odor is often the first sign. We find the wet area and open it only where needed.
Mold found during a remodel
Pulling out old cabinets often exposes mold on the wall or floor behind them. We contain the area and remove it before new materials go in.
Mold inside a wall after a leak
When a pipe in the kitchen wall has leaked, mold may be on the back of the drywall and the studs. We contain the area, open the wall and remove the affected material.
Mold on cabinet backs and particleboard
We remove mold-affected particleboard and match new panels to the cabinet where we can.
Mold under the sink with no visible leak
No puddle doesn't mean no moisture. Slow seepage, sweating pipes or an old leak that was never dried can feed growth under a sink.
From cleanup to rebuild
- Inspection and moisture readingsWe look at the visible growth, check surrounding materials with a meter and find the moisture source.
- Fixing the moisture sourceEPA advises fixing the water problem first; otherwise the mold returns.
- HEPA air filtrationAir scrubbers with HEPA filters run during the work, often with negative pressure on the containment.
- Removing affected porous materialsMoldy drywall, insulation, particleboard and other porous materials are cut out and bagged.
- Cleaning what staysFraming, plywood and other solid surfaces are HEPA-vacuumed and cleaned.
- Final cleaningA detailed cleanup of the work area finishes the remediation.
- RebuildWe restore the cabinet, wall or floor that was removed.
Methods and equipment
HEPA vacuumsCleanup equipment that holds fine dust instead of blowing it around.
Replacement panels and drywallMaterials to rebuild the area after remediation.
Containment sheetingPlastic barriers, zip doors and tape that isolate the work area.
Mold-resistant materialsMoisture-resistant drywall or plywood cabinet bottoms where it makes sense.
Moisture metersReadings that show where moisture is and when drying is done.
Kitchens like yours in Geneva: before and after
Problem
Fixed
DetailKitchen Mold Remediation in a 1990s two-story colonial, Geneva
The site: a 1990s two-story colonial near Mill Creek. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: a swollen, spotted cabinet floor under the sink. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant fixing the moisture source, cleaning what stays, plus final cleaning.
Before
AfterKitchen Mold Remediation in a two-story colonial from the 1990s, Batavia
The site: a two-story colonial from the 1990s in Batavia. What we started with: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The reason for the call: a musty smell that wouldn't go away. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered fixing the moisture source, removing affected porous materials, plus final cleaning.
Kitchen Mold Remediation in Batavia →
Before
AfterKitchen Mold Remediation in a 1990s two-story colonial, St. Charles
This one is a 1990s two-story colonial in St. Charles. What we started with: solid-surface integrated sink and golden-oak cabinets with oak soffits above. The reason for the call: a musty smell that wouldn't go away. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included removing affected porous materials, cleaning what stays, plus rebuild.
Kitchen Mold Remediation in St. Charles →
Before
AfterKitchen Remodeling in a two-story colonial from the 1990s, Geneva
Finished: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Geneva →
Before
AfterBefore and after: a two-story colonial from the 1990s in Geneva
What changed: the same doors sprayed in cream uppers and walnut-stained lowers, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Geneva →How restoration goes
- InspectA visit to assess the growth, the moisture and the plan.
- Fix the moistureThe source gets fixed first so the work lasts.
- Contain and removeContainment goes up, then moldy materials are removed and surfaces cleaned.
- Dry and rebuildOnce dry and clean, the kitchen is put back together.
Kitchen Mold Remediation questions from Geneva homeowners
What's the difference between mold removal and mold remediation?
Remediation is the full process: source, containment, removal, cleaning and drying. Simply cleaning the surface is removal.
Will bleach kill mold under my sink?
On particleboard or drywall, bleach doesn't solve it. The affected material needs to come out and the leak needs fixing.
How long does kitchen mold remediation take?
A contained sink-base job is short; a wall cavity takes longer. We give you a schedule after the inspection.
Do I need mold testing before remediation?
If you can see it and know why it's there, testing often isn't needed. For hidden mold, legal or sale questions, or peace of mind, hire an independent tester.
Do you need a license for mold remediation in Illinois?
Illinois doesn't have a state mold remediation license. We follow industry practice such as IICRC guidance and EPA recommendations for containment and removal.
Does kitchen mold remediation need a Geneva building permit, and who files it?
Permits go through Building & Zoning Division (Building Division), 109 James St., phone 630-262-0280. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in Geneva?
It depends on the scope. Geneva's rule in short: A building permit is required before any construction or alteration; separate Kitchen Remodel permit form exists. We handle the permit when one is needed with Building & Zoning Division (Building Division), 109 James St..
Do you work in my part of Geneva?
Yes. Our crews work across Geneva, including Mill Creek — ZIP 60134, 60510 — and nearby Batavia, St. Charles, West Chicago.
Working in Geneva
- A lot of Geneva kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Geneva homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Geneva Historic District and designated Historic Landmarks? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Mill Creek
ZIP 60134ZIP 60510
Kitchen Mold Remediation nearby
Other kitchen services in Geneva
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.