Serving Bolingbrook & nearby Woodridge, Naperville

Kitchen Plumbing Relocation in Bolingbrook, IL

Sinks, dishwashers and water lines moved to the new layout in Bolingbrook, with the drain sloped and vented to code.

  • Installers working in Bolingbrook ZIP 60440, 60490
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Bolingbrook licensed plumber will call you.

When the plumbing has to move in Bolingbrook

A new layout often means the sink, the dishwasher or the fridge line has to move. In Bolingbrook our licensed plumbers reroute the drain, the vent and the water supply, pull the village permit and leave everything ready for the cabinets.

House on a slab or crawlspace

Slab floors are the hard case: the new drain runs in a trench cut through the concrete. We tell you up front whether your 1970s home has a slab, a crawlspace or a basement under the kitchen.

New fridge spot with no water

A fridge relocated across the room still needs water for ice and the dispenser. A new supply line with its own shut-off goes in while the walls are open.

Gas line in the way of the new layout

If the range is moving too, the gas line has to follow. That is separate licensed work, scheduled and inspected alongside the plumbing.

Island sink with no wall to vent into

A sink in an island has no wall behind it for a vent pipe. We solve that with a loop vent under the counter, tied back into the house venting the way the plumbing code requires.

Sink moved under a window

Putting the sink under a window is a common request. The drain and vent have to work around the window framing, and supply lines stay off the cold outside wall when possible.

Not sure if the move is even possible

We check the drain route, the vent options and the floor structure first, so the design matches what the plumbing can actually do.

Dishwasher on the wrong side of the sink

Lefty cooks and new layouts often want the dishwasher swapped. The hose, the supply and the high loop or air gap all get rerouted to the new position.

Sink stuck on the wrong wall

If the sink sits in a corner or far from the range, the work triangle never feels right. A new drain and supply run lets the sink go where you actually prep.

What the install includes

  • Layout and route checkWe look at the floor, the basement or crawlspace and the walls to plan the drain and water route.
  • Permit applicationPermit paperwork handled before the first pipe is cut.
  • Shut-off and removalWater shut off, old supply lines capped and the abandoned drain sealed properly.
  • New drain at the right slopeThe new drain is pitched, supported and joined to the existing line.
  • VentingA vent tied into the system, or a loop vent in an island, run to the plumbing code.
  • Dishwasher, fridge and pot filler linesBranch lines for the dishwasher, the ice maker and a pot filler if you want one.
  • Final hookupOnce the new counter is installed, the fixtures are connected and checked for leaks.

Options to choose from

Cleanouts at the new drainAn accessible cleanout near the relocated sink so a future clog can be cleared without opening the cabinet floor.
Loop ventA vent loop inside the island cabinet that rises as high as possible before dropping to the drain.
Quarter-turn shut-off valvesEasy-to-use valves so any fixture can be isolated without shutting off the house.
Copper supply linesType L copper soldered or press-fitted, a long-lasting choice for supply lines.
PEX supply linesPEX bends around framing, which means fewer joints that could leak later.

Kitchens like yours in Bolingbrook: before and after

Kitchen Plumbing Relocation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Plumbing Relocation in a 1980s-1990s two-story colonial / tract house — afterAfter

Kitchen Plumbing Relocation in a two-story colonial from the 1990s, Bolingbrook

The site: a two-story colonial from the 1990s near Westbury. What we started with: solid-surface integrated sink and golden-oak cabinets with oak soffits above. What bothered the owners most: wanting the sink in the island. The result: a new island with a prep sink, the drain, vent and water lines relocated from the old wall. The job covered layout and route check, new drain at the right slope, plus dishwasher, fridge and pot filler lines.

Kitchen Plumbing Relocation project in Lisle, beforeBefore
Kitchen Plumbing Relocation project in Lisle, afterAfter

Lisle kitchen, 1980s two-story: kitchen plumbing relocation

A 1980s two-story near The Meadows, a typical kitchen for Lisle. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: a sink on the wrong wall for how they cook. The result: a new island with a prep sink, the drain, vent and water lines relocated from the old wall. The job covered new drain at the right slope, dishwasher, fridge and pot filler lines, plus final hookup.

Kitchen Plumbing Relocation in Lisle →
Kitchen Plumbing Relocation project in Plainfield, beforeBefore
Kitchen Plumbing Relocation project in Plainfield, afterAfter

Kitchen Plumbing Relocation in a 2000s open-plan home, Plainfield

A 2000s open-plan home in Plainfield, a typical kitchen for Plainfield. The kitchen as it was: undermount stainless double sink and cherry-stained shaker cabinets. The reason for the call: a sink on the wrong wall for how they cook. The result: a new island with a prep sink, the drain, vent and water lines relocated from the old wall. The job covered shut-off and removal, new drain at the right slope, plus final hookup.

Kitchen Plumbing Relocation in Plainfield →
Kitchen Remodeling project near Bolingbrook, beforeBefore
Kitchen Remodeling project near Bolingbrook, afterAfter

Bolingbrook kitchen, 1980s two-story: kitchen remodeling

What changed: cabinets in white uppers and deep green lowers with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Bolingbrook →
Kitchen Cabinet Painting project near Bolingbrook, beforeBefore
Kitchen Cabinet Painting project near Bolingbrook, afterAfter

Kitchen Cabinet Painting in a 1990s two-story colonial, Bolingbrook

What changed: the same doors sprayed in forest green, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Bolingbrook →

How the install goes

  1. Plan the moveSite check of the stack, the floor and the walls before the design is final.
  2. Permit and rough-inPermit filed, walls or floor opened and new drain, vent and water lines run.
  3. Test and inspectThe work is tested and inspected before drywall, flooring or concrete go back.
  4. Close up and connectFinal connections, leak check and a walk-through of the shut-off valves.

Kitchen Plumbing Relocation questions from Bolingbrook homeowners

Can you do the plumbing if another company does the cabinets?
Yes, as long as we have the cabinet layout. The drain and supply stub-outs are placed to match it.
What affects the price of moving kitchen plumbing?
Basement versus slab, the length of the run and how many fixtures move drive the price. You get a line-item estimate after we see it.
How long does a kitchen plumbing relocation take?
A simple move can be done in a day or two; slab cutting or long runs take longer.
How is an island sink vented?
With a loop vent inside the island cabinet, tied back into the venting system. The exact route depends on the layout and the plumbing inspector.
Do I need a permit to move a kitchen sink in Bolingbrook?
Moving or adding drain and water lines usually needs a village plumbing permit and an inspection. We take care of the application.
Does Bolingbrook require a licensed plumber for plumbing relocation?
Village enforces the current Illinois State Plumbing Code and has a Plumbing Inspector, (630) 226-8475. Our plumbing connections are made by licensed plumbers.
Do I need a Bolingbrook-registered contractor for plumbing relocation?
The Village has a Contractor Registration form on its permit portal. We take care of that before work starts.
Bolingbrook building permit for plumbing relocation: where do I apply?
Permits go through Building Division (Community Development), Village of Bolingbrook, phone (630) 226-8470. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for plumbing relocation in Bolingbrook?
It depends on the scope. Bolingbrook's rule in short: Permits are required for new construction, renovations, additions, alterations and repairs and must be obtained before work starts. We handle the permit when one is needed with Building Division (Community Development), Village of Bolingbrook.
Do you work in my part of Bolingbrook?
Yes. Our crews work across Bolingbrook, including Westbury, Colonial Village, Heritage Creek — ZIP 60440, 60490 — and nearby Woodridge, Naperville, Lisle.

Working in Bolingbrook

  • A lot of Bolingbrook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Bolingbrook homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Building Division (Community Development), Village of Bolingbrook handles kitchen permits and pull them for you.

WestburyColonial VillageHeritage Creek

ZIP 60440ZIP 60490

Kitchen Plumbing Relocation nearby

Planning a kitchen project in Bolingbrook?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback