Serving Bolingbrook & nearby Woodridge, Naperville

Kitchen Faucet Installation in Bolingbrook, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Bolingbrook.

  • Installers working in Bolingbrook ZIP 60440, 60490
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Bolingbrook licensed plumber will call you.

Kitchen faucet problems we fix in Bolingbrook

Whether you picked a pull-down, a touchless or a bridge faucet, we fit it to your sink or counter in Bolingbrook, cover or reuse the extra holes, and connect it with new supply lines.

Leak under the sink at the faucet lines

Water dripping inside the cabinet near the faucet usually comes from the supply connections or a pull-down hose that has cracked. We replace the failed part.

Shut-off valves that won't turn

Seized stops are the most common surprise on a faucet job. New quarter-turn valves make the next repair easy.

Low flow or a sputtering spout

Weak flow at the kitchen faucet while other taps are fine is often a clogged aerator or a scaled spray head. We clean or replace them first.

Pull-down sprayer that won't retract

If the spray head won't dock, the weight on the hose may have slipped or the hose is rubbing on the disposal or drain. We reset it.

Faucet loose or wobbling on the sink

If the faucet turns or tilts when you push the handle, the nut below has backed off. We secure it from inside the cabinet.

Old two-handle faucet with a side sprayer

Separate hot and cold handles and a side sprayer that leaks are a common reason to upgrade. A single-handle pull-down does both jobs in one.

Spout too short or too low

If big pots don't fit under the faucet, a taller spout fixes it. We check that it clears the window sill or the cabinets above.

Faucet leaking from the base

A puddle at the foot of the faucet each time you use it comes from the spout seals. We rebuild it if parts exist, or install a new one.

What we hook up and check

  • Shut off and removeThe old faucet and side sprayer taken off without damaging the sink.
  • Replace valves when neededNew shut-off valves if the old ones won't close or weep.
  • Mount the faucetFaucet set with its gasket or deck plate and tightened from below.
  • Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
  • Supply connectionsNew braided supply lines connected and tightened without strain.
  • Power for touchless modelsControl box mounted and battery pack or plug-in adapter set up.
  • Flush and testWe run hot and cold, test the sprayer and look for drips below.

What to pick before the install

Bridge and two-handle faucetsThree-hole faucets with a classic look, often with a side sprayer.
Deck platesTrim that lets a one-hole faucet sit cleanly on a three-hole sink.
Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
FinishesStainless, chrome, matte black and brass finishes, each with its own care.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.

Kitchen Faucet Installation before and after — Bolingbrook homes

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Kitchen Faucet Installation in a 1990s two-story colonial, Bolingbrook

This one is a 1990s two-story colonial near Heritage Creek. What we started with: white double sink. What bothered the owners most: a leaking two-handle faucet with a side sprayer. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. Work included replace valves when needed, supply connections, plus power for touchless models.

Kitchen Faucet Installation project in Woodridge, beforeBefore
Kitchen Faucet Installation project in Woodridge, afterAfter

Before and after: a suburban townhome in Woodridge

A suburban townhome near Seven Bridges, a typical kitchen for Woodridge. Before: stainless double sink. The main complaint was a leaking two-handle faucet with a side sprayer. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. Work included replace valves when needed, mount the faucet, plus supply connections.

Kitchen Faucet Installation in Woodridge →
Kitchen Faucet Installation project in Plainfield, beforeBefore
Kitchen Faucet Installation project in Plainfield, afterAfter

Plainfield kitchen, newer open-plan house: kitchen faucet installation

The site: a newer open-plan house in Plainfield. Before: white farmhouse sink. The reason for the call: an old faucet that dripped and was crusted with scale. After: a new single-handle pull-down faucet with a clean caulk line. Work included replace valves when needed, mount the faucet, plus flush and test.

Kitchen Faucet Installation in Plainfield →
Kitchen Plumbing Relocation project near Bolingbrook, beforeBefore
Kitchen Plumbing Relocation project near Bolingbrook, afterAfter

Kitchen Plumbing Relocation in a two-story colonial from the 1990s, Bolingbrook

A new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Bolingbrook →
Kitchen Remodeling project near Bolingbrook, beforeBefore
Kitchen Remodeling project near Bolingbrook, afterAfter

Bolingbrook kitchen, two-story colonial from the 1990s: kitchen remodeling

Finished: cabinets in white uppers and deep green lowers with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Bolingbrook →

Install day

  1. Pick a faucetSend the model you like and a photo of your sink.
  2. Check the setupWe confirm the hole count, valves and clearances.
  3. Written estimateAn itemized quote for the install and parts before we start.
  4. Install and testInstalled, flushed and checked for leaks, usually in one visit.

Kitchen Faucet Installation questions from Bolingbrook homeowners

Pull-down or pull-out: which should I choose?
If there's room above the sink, a pull-down. If space is tight, a pull-out.
Why is my faucet leaking from the base?
Worn spout seals. We tell you if a repair kit fixes it or if a new faucet is the better buy.
My new faucet doesn't fit my sink holes. What now?
Mismatched holes are common and easy to solve with a deck plate, accessories or a new hole.
Are touchless faucets worth it?
For people who cook a lot, yes: no greasy handles. They need batteries or power under the sink and a little more upkeep.
Should I replace the shut-off valves too?
We test them first. Valves that are stiff, crusted or weeping get replaced with quarter-turn ones.
Do I need a Bolingbrook-registered contractor for faucet installation?
The Village has a Contractor Registration form on its permit portal. We take care of that before work starts.
Bolingbrook plumbing code: who can do the plumbing for faucet installation?
Village enforces the current Illinois State Plumbing Code and has a Plumbing Inspector, (630) 226-8475. Our plumbing connections are made by licensed plumbers.
What is the Bolingbrook building department phone number?
Permits go through Building Division (Community Development), Village of Bolingbrook, phone (630) 226-8470. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for faucet installation in Bolingbrook?
It depends on the scope. Bolingbrook's rule in short: Permits are required for new construction, renovations, additions, alterations and repairs and must be obtained before work starts. We handle the permit when one is needed with Building Division (Community Development), Village of Bolingbrook.
Do you work in my part of Bolingbrook?
Yes. Our crews work across Bolingbrook, including Westbury, Colonial Village, Heritage Creek — ZIP 60440, 60490 — and nearby Woodridge, Naperville, Lisle.

Working in Bolingbrook

  • A lot of Bolingbrook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Bolingbrook homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Building Division (Community Development), Village of Bolingbrook handles kitchen permits and pull them for you.

WestburyColonial VillageHeritage Creek

ZIP 60440ZIP 60490

Kitchen Faucet Installation nearby

Planning a kitchen project in Bolingbrook?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback