Serving Lisle & nearby Downers Grove, Woodridge

Kitchen Faucet Installation in Lisle, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Lisle.

  • Installers working in Lisle ZIP 60532
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Lisle licensed plumber will call you.

Kitchen faucet problems we fix in Lisle

Whether you picked a pull-down, a touchless or a bridge faucet, we fit it to your sink or counter in Lisle, cover or reuse the extra holes, and connect it with new supply lines.

Scale on the aerator from lake water

White crust on the spray face is mineral buildup. Many Lisle owners just need the aerator cleaned or swapped, not a new faucet.

Leak under the sink at the faucet lines

If the faucet looks fine on top but the cabinet is wet, check the lines under it. Worn supply hoses and spray hoses are common culprits.

Spout too short or too low

Spout height and reach matter as much as style. We match the faucet to your sink size so water lands in the center of the bowl.

Faucet loose or wobbling on the sink

If the faucet turns or tilts when you push the handle, the nut below has backed off. We secure it from inside the cabinet.

Faucet leaking from the base

A puddle at the foot of the faucet each time you use it comes from the spout seals. We rebuild it if parts exist, or install a new one.

Wanting a touchless faucet

Hands-free faucets have a sensor, a solenoid valve and a battery pack or outlet connection. We mount it all where it's reachable for service.

Drip from the spout that won't stop

A steady drip with the handle off means the cartridge or valve seat is worn. We swap the cartridge when it's available, or replace the faucet.

Old two-handle faucet with a side sprayer

Separate hot and cold handles and a side sprayer that leaks are a common reason to upgrade. A single-handle pull-down does both jobs in one.

Included with the install

  • Check the sink and suppliesWe look at the hole layout, the valves and the space under the sink before you choose.
  • Shut off and removeWater off, supply lines disconnected and the old faucet unbolted.
  • Clean the deckOld putty, caulk and mineral residue cleaned from the mounting surface.
  • Replace valves when neededSeized or leaking stops replaced with quarter-turn valves.
  • Mount the faucetFaucet set with its gasket or deck plate and tightened from below.
  • Supply connectionsHot and cold lines hooked up to the valves.
  • Extra holesUnused holes covered or fitted with a soap dispenser or filtered-water tap.

What to pick before the install

Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
Bridge and two-handle faucetsSeparate hot and cold handles on a bridge or widespread base for traditional kitchens.
Filtered-water and pot-filler tapsExtra taps that use a spare hole or a separate supply line.
Touchless and touch faucetsSensor or tap-to-start faucets that need batteries or an outlet under the sink.
FinishesStainless, chrome, matte black and brass finishes, each with its own care.

What the work looks like in Lisle homes

Kitchen Faucet Installation in a suburban condo / townhome — beforeBefore
Kitchen Faucet Installation in a suburban condo / townhome — installedInstalled
Kitchen Faucet Installation in a suburban condo / townhome — detailDetail

Kitchen Faucet Installation in a townhouse from the 1990s, Lisle

This one is a townhouse from the 1990s in Lisle. Before: stainless double sink. The main complaint was a leaking two-handle faucet with a side sprayer. After: a new single-handle pull-down faucet with a clean caulk line. On site this meant shut off and remove, replace valves when needed, plus supply connections.

Kitchen Faucet Installation project in Downers Grove, beforeBefore
Kitchen Faucet Installation project in Downers Grove, afterAfter

Kitchen Faucet Installation in a 1990s two-story colonial, Downers Grove

A 1990s two-story colonial in Downers Grove, a typical kitchen for Downers Grove. The kitchen as it was: solid-surface integrated sink. What bothered the owners most: a leaking faucet with handles that were hard to turn. The result: a new single-handle pull-down faucet with a clean caulk line. The job covered replace valves when needed, mount the faucet, plus supply connections.

Kitchen Faucet Installation in Downers Grove →
Kitchen Faucet Installation project in Naperville, beforeBefore
Kitchen Faucet Installation project in Naperville, afterAfter

Before and after: a 1980s two-story in Naperville

A 1980s two-story in Naperville, a typical kitchen for Naperville. The kitchen as it was: white double sink. What bothered the owners most: a leaking two-handle faucet with a side sprayer. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant clean the deck, replace valves when needed, plus mount the faucet.

Kitchen Faucet Installation in Naperville →
Kitchen Plumbing Relocation project near Lisle, beforeBefore
Kitchen Plumbing Relocation project near Lisle, afterAfter

Lisle kitchen, 1990s two-story colonial: kitchen plumbing relocation

What changed: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Lisle →
Kitchen Remodeling project near Lisle, beforeBefore
Kitchen Remodeling project near Lisle, afterAfter

Kitchen Remodeling in a 1990s two-story colonial, Lisle

Finished: cabinets in light butter yellow with satin brass pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Lisle →

From the old unit to the new one

  1. Pick a faucetSend the model you like and a photo of your sink.
  2. Check the setupA quick look under the sink tells us what else the job needs.
  3. Written estimateYou get the price in writing, including any valve replacement.
  4. Install and testInstalled, flushed and checked for leaks, usually in one visit.

Kitchen Faucet Installation questions from Lisle homeowners

Should I replace the shut-off valves too?
Often yes. A new faucet on old valves is the most common setup for a future leak.
Are touchless faucets worth it?
Many owners like them. Expect to change batteries or use a plug-in adapter, and know there's a manual mode too.
What does a faucet installation cost?
We price it after a look at the setup, and it comes in writing.
My new faucet doesn't fit my sink holes. What now?
We cover leftover holes or use them for a soap dispenser or filter tap, and drill stone when needed.
Do I need a plumber to install a faucet?
We recommend it, especially when the shut-off valves are old or the faucet needs a new hole. A licensed plumber makes the connections on every faucet we install.
Does faucet installation need a Lisle building permit, and who files it?
Permits go through Development Services Department, phone 630-271-4150. When your scope needs one, we prepare the application and schedule the inspections.
What is Lisle doing about lead water lines?
Village completed an IEPA service line material inventory and a lead service line plan; interactive map of known service line materials is online. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Lisle water: how does it affect faucet installation?
Lisle's water source: Lake Michigan water purchased from the DuPage Water Commission (Oakview and nearby unincorporated areas are served by Illinois American Water). Aerators and cartridges scale faster with harder water.
Do Lisle condo associations need to approve faucet installation?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do you work in my part of Lisle?
Yes. Our crews work across Lisle, including Oakview, The Meadows, Four Lakes Village — ZIP 60532 — and nearby Downers Grove, Woodridge, Wheaton.

Working in Lisle

  • A lot of Lisle kitchens date from the 1980s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.

OakviewThe MeadowsFour Lakes Village

ZIP 60532

Kitchen Faucet Installation nearby

Planning a kitchen project in Lisle?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback