Serving Naperville & nearby Lisle, Warrenville

Kitchen Faucet Installation in Naperville, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Naperville.

  • Installers working in Naperville ZIP 60540, 60563, 60564, 60565
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Naperville licensed plumber will call you.

Kitchen faucet problems we fix in Naperville

A kitchen faucet swap is quick when the valves turn, the holes match and the old nuts come loose. In Naperville our licensed plumbers handle the cases where they don't, and leave you with a faucet that doesn't drip at the base.

Scale on the aerator from lake water

Lake water carries some minerals that collect in the faucet's screen. We clean or replace the aerator before suggesting anything bigger.

Worried about lead at the kitchen tap

If Naperville lists your line as lead, a new faucet plus a filter certified for lead reduction is a sensible step for drinking water.

Spout too short or too low

A low spout makes it hard to fill stockpots and leaves water splashing at the back. A high-arc or pull-down faucet gives more room.

Shut-off valves that won't turn

Seized stops are the most common surprise on a faucet job. New quarter-turn valves make the next repair easy.

Leak under the sink at the faucet lines

If the faucet looks fine on top but the cabinet is wet, check the lines under it. Worn supply hoses and spray hoses are common culprits.

Low flow or a sputtering spout

Before you replace a faucet for low pressure, we check the aerator, the cartridge and the shut-off valves. Often one of them is the cause.

Faucet loose or wobbling on the sink

Wobbly faucets loosen further over time and start leaking at the deck. A proper re-mount fixes it.

Leaking from the handle

Leaks at the lever come from the valve inside the body. We replace the cartridge or the whole faucet, depending on its age.

What we hook up and check

  • Shut off and removeThe old faucet and side sprayer taken off without damaging the sink.
  • Clean the deckOld putty, caulk and mineral residue cleaned from the mounting surface.
  • Replace valves when neededSeized or leaking stops replaced with quarter-turn valves.
  • Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
  • Supply connectionsHot and cold lines hooked up to the valves.
  • Power for touchless modelsControl box mounted and battery pack or plug-in adapter set up.
  • Flush and testAerator off, lines flushed of debris, then every joint checked under pressure.

What to pick before the install

FinishesChrome wipes clean easily; matte and brushed finishes hide spots.
Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
Filtered-water and pot-filler tapsExtra taps that use a spare hole or a separate supply line.
Touchless and touch faucetsHands-free models for messy hands, with a control box below.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.

Kitchen Faucet Installation before and after — Naperville homes

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Naperville kitchen, 1990s two-story colonial: kitchen faucet installation

The site: a 1990s two-story colonial in Naperville. Before: white double sink. The main complaint was a faucet too low to fill a stockpot. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant shut off and remove, supply connections, plus flush and test.

Kitchen Faucet Installation project in Lisle, beforeBefore
Kitchen Faucet Installation project in Lisle, afterAfter

Before and after: a suburban townhome in Lisle

The site: a suburban townhome near The Meadows. The kitchen as it was: stainless double sink. The reason for the call: a leaking two-handle faucet with a side sprayer. After: a new single-handle pull-down faucet with a clean caulk line. On site this meant replace valves when needed, pull-down hose and weight, plus supply connections.

Kitchen Faucet Installation in Lisle →
Kitchen Faucet Installation project in Warrenville, beforeBefore
Kitchen Faucet Installation project in Warrenville, afterAfter

Warrenville kitchen, 1980s two-story: kitchen faucet installation

A 1980s two-story near Thornwilde, a typical kitchen for Warrenville. The kitchen as it was: white cast-iron double sink. The reason for the call: an old two-handle faucet that dripped into a worn porcelain bowl. The result: a new single-handle pull-down faucet with a clean caulk line. The job covered shut off and remove, clean the deck, plus pull-down hose and weight.

Kitchen Faucet Installation in Warrenville →
Kitchen Plumbing Relocation project near Naperville, beforeBefore
Kitchen Plumbing Relocation project near Naperville, afterAfter

Naperville kitchen, 1980s two-story: kitchen plumbing relocation

Finished: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Naperville →
Kitchen Remodeling project near Naperville, beforeBefore
Kitchen Remodeling project near Naperville, afterAfter

Before and after: a 1980s two-story in Naperville

Cabinets in light butter yellow with satin brass pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Naperville →

Install day

  1. Pick a faucetChoose one yourself or ask us what fits your sink and holes.
  2. Check the setupA quick look under the sink tells us what else the job needs.
  3. Written estimateAn itemized quote for the install and parts before we start.
  4. Install and testInstalled, flushed and checked for leaks, usually in one visit.

Kitchen Faucet Installation questions from Naperville homeowners

Do I need a plumber to install a faucet?
A faucet swap is plumbing work. Our licensed plumbers handle it, including the valves and supply lines that often need replacing.
How long does it take to install a kitchen faucet?
A straightforward swap is usually done in a short visit; touchless models and valve replacement take a little longer.
Why is my faucet leaking from the base?
Worn spout seals. We tell you if a repair kit fixes it or if a new faucet is the better buy.
Repair or replace a dripping faucet?
A new cartridge fixes many drips on a good faucet. Builder-grade and older faucets are usually better replaced.
What does a faucet installation cost?
The faucet type, the condition of the valves and lines and any drilling decide it. We give a written, itemized estimate after we see the sink.
Naperville building permit for faucet installation: where do I apply?
Permits go through Transportation, Engineering and Development (TED) Business Group, Building Permits, phone (630) 420-6100, Option 2. When your scope needs one, we prepare the application and schedule the inspections.
Does Naperville require a licensed plumber for faucet installation?
City guide lists plumbers among trades that require a license; plumbing pipe/fixture work needs a permit. Our plumbing connections are made by licensed plumbers.
Naperville water: how does it affect faucet installation?
Naperville's water source: Lake Michigan water purchased through the DuPage Water Commission from the City of Chicago (emergency wells on standby only). Aerators and cartridges scale faster with harder water.
Does Naperville have lead service lines?
City-funded program since 2024 replaces known lead lines at no cost to homeowners; less than 1% of lines known lead. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a permit for faucet installation in Naperville?
It depends on the scope. Naperville's rule in short: Remodeling such as kitchens requires a permit, as do electrical work (minor repairs and low-voltage excepted), plumbing pipe/fixture installation or rearrangement, and structural changes. We handle the permit when one is needed with Transportation, Engineering and Development (TED) Business Group, Building Permits.
Do you work in my part of Naperville?
Yes. Our crews work across Naperville, including Downtown Naperville, Highlands, Tamarack — ZIP 60540, 60563, 60564, 60565 — and nearby Lisle, Warrenville, Bolingbrook.

Working in Naperville

  • A lot of Naperville kitchens date from the 1990s. We know these layouts well and what is worth keeping.
  • Most Naperville homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in the Naperville Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

Downtown NapervilleHighlandsTamarack

ZIP 60540ZIP 60563ZIP 60564ZIP 60565

Kitchen Faucet Installation nearby

Planning a kitchen project in Naperville?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback