Serving Bloomingdale & nearby Roselle, Glendale Heights

Kitchen Design & Layout Planning in Bloomingdale, IL

Measured layouts, 3D views and an appliance plan for your Bloomingdale kitchen, drawn before anything is ordered.

  • Local crews working in Bloomingdale ZIP 60108
  • Design, permits and every trade on one schedule
  • A written, itemized estimate before any work

Prefer a callback?

Leave your number and a Bloomingdale kitchen designer will call you.

Layout problems we solve in Bloomingdale kitchens

Most of what makes a kitchen work is decided on paper: where the sink sits, how wide the aisles are, which drawer holds the pots. We measure your Bloomingdale kitchen, sketch a few layout options and refine one into drawings our crew builds from.

A 1970s layout with a peninsula and soffits

Typical 1970s plans close the kitchen with a peninsula and upper cabinets hanging over it. Redrawing that one element often changes the whole room.

Narrow galley kitchen

Narrow kitchens fail when appliances face each other and doors collide. We stagger them and pick drawer storage so two people can still pass.

Corners and dead storage

Blind corner cabinets swallow pots you never see again. We plan corner pull-outs, drawers that turn the corner, or simply move the run so the corner disappears.

You can't picture the finished room

Before you commit, you see the room in 3D from the doorway, the sink and the table, and we adjust until it looks right to you.

No landing space next to appliances

If you have to turn around to put anything down when the oven door is open, the landing areas are missing. We plan counter space exactly where hands need it.

Aisles that are too tight or too wide

Aisles that are too narrow make you squeeze past an open oven; too wide and you walk an extra step every turn. We set the clearance to your household, not to a stock plan.

Appliances chosen too late

A range or refrigerator picked after the cabinets are ordered often won't fit. We build the plan around the model numbers you choose, with the right openings, power, gas and venting.

Lighting and outlets planned as an afterthought

Outlets that land behind the coffee maker and a single switch for the whole room come from skipping the electrical plan. Ours shows every light, switch and outlet.

What the project covers

  • Site measurementA full measure of the room, plus where the drain, gas line, duct and panel sit.
  • Layout optionsSeveral floor-plan options with the trade-offs of each, so you choose the direction.
  • Cabinet and storage layoutA detailed cabinet plan with drawer stacks, corner solutions and tall storage.
  • Lighting and electrical planAn electrical layout showing each light, switch, dimmer and outlet location.
  • 3D viewsThree-dimensional views of the room so you can check heights, sight lines and finishes.
  • Material selectionsSamples of cabinets, counters and tile reviewed together in your own light.
  • Drawings for permit and constructionConstruction drawings with dimensions, and permit drawings when walls, plumbing or wiring change.

Choices you'll make

Shaker and slab cabinet stylesThe two door styles we draw most often, shown in 3D in your colors.
L-shaped layout with an islandThe most common plan in suburban homes: two walls of cabinets and an island for prep and seating.
Peninsula instead of an islandGives most of an island's benefits in rooms that can't spare the floor space.
Two-tone and wood accentsA painted perimeter with a wood or darker island adds depth without busy finishes.
Galley layoutTwo parallel runs, efficient for one cook and very common in older homes and condos.

Before and after: kitchens near Bloomingdale

Kitchen Design & Layout Planning in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Design & Layout Planning in a 1980s-1990s two-story colonial / tract house — in progressIn progress
Kitchen Design & Layout Planning in a 1980s-1990s two-story colonial / tract house — afterAfter

A Bloomingdale 1990s two-story colonial: before and after

A 1990s two-story colonial near Old Town Bloomingdale, a typical kitchen for Bloomingdale. The kitchen as it was: golden-oak cabinets with oak soffits above, white Corian-style solid surface with a yellowed seam and black appliances. The reason for the call: no place to sit and too little storage. Finished kitchen: a new layout with an island, cabinets in light warm taupe, warm walnut butcher block counters and recessed lights and under-cabinet LED strips. On site this meant layout options, cabinet and storage layout, plus lighting and electrical plan.

Kitchen Design & Layout Planning project in Roselle, beforeBefore
Kitchen Design & Layout Planning project in Roselle, afterAfter

Before and after: a 1970s tract home in Roselle

A 1970s tract home in Roselle, a typical kitchen for Roselle. What we started with: white painted cabinets with yellowed paint and dated scalloped trim, white laminate with brown flecks and an almond range and refrigerator. The main complaint was no place to sit and too little storage. The result: a new layout with an island, cabinets in terracotta, dark soapstone-look quartz counters and recessed lights and under-cabinet LED strips. Work included layout options, cabinet and storage layout, plus lighting and electrical plan.

Kitchen Design & Layout Planning in Roselle →
Kitchen Design & Layout Planning project in Glendale Heights, beforeBefore
Kitchen Design & Layout Planning project in Glendale Heights, afterAfter

Glendale Heights kitchen, 1980s two-story: kitchen design & layout planning

This one is a 1980s two-story in Glendale Heights. The kitchen as it was: white thermofoil cabinets peeling at the edges, oak trim, white ceramic tile with dark stained grout lines and white appliances. The main complaint was a cramped layout and storage that didn't work. The result: a new layout with an island, cabinets in terracotta, charcoal concrete-look quartz counters and a flush drum fixture and under-cabinet lights. The job covered lighting and electrical plan, 3D views, plus material selections.

Kitchen Design & Layout Planning in Glendale Heights →
Kitchen Remodeling project near Bloomingdale, beforeBefore
Kitchen Remodeling project near Bloomingdale, afterAfter

Before and after: a 1990s two-story colonial in Bloomingdale

Cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.

Kitchen Remodeling in Bloomingdale →
Custom Kitchen Cabinets project near Bloomingdale, beforeBefore
Custom Kitchen Cabinets project near Bloomingdale, afterAfter

A Bloomingdale 1990s two-story colonial: before and after

Built-to-fit cabinetry to the ceiling in white uppers and deep green lowers with matte black pulls and charcoal concrete-look quartz counters.

Custom Kitchen Cabinets in Bloomingdale →

How your kitchen design goes

  1. Measure and listenWe visit, measure the room and go through how you use the kitchen and what isn't working.
  2. Layout optionsWe present a few floor plans and talk through what each one gains and gives up.
  3. 3D views and selectionsThe chosen plan becomes 3D views, and we pick cabinets, counters and finishes together.
  4. Final drawings and estimateDetailed drawings and a line-item quote you can review before ordering.

Kitchen Design & Layout Planning questions from Bloomingdale homeowners

Do you build the kitchen you design?
Yes. We are a design-build contractor, so the same team that draws the plan orders the cabinets and builds it.
Do I need drawings for a permit in Bloomingdale?
When walls, plumbing, gas or wiring change, the village typically wants drawings with the permit application. We prepare them as part of the plan.
Which layout suits my kitchen: galley, L, U or island?
Long and narrow rooms often suit a galley, wider rooms an L with an island, closed rooms a U. We test each against your measurements.
Can you design around my existing plumbing?
Yes, and it often makes sense. Keeping the sink and gas where they are saves construction time, and we change them only where it fixes a real problem.
How long does the design take?
Usually a few weeks. Choosing appliances and finishes quickly is what keeps it moving.
Bloomingdale contractor registration: do kitchen contractors need it?
No registration application or fee to work as a contractor in Bloomingdale. Permit submittals need a detailed written scope of work. We take care of that before work starts.
Bloomingdale building permit for kitchen design: where do I apply?
Permits go through Building & Zoning Department, phone (630) 671-5660. When your scope needs one, we prepare the application and schedule the inspections.
Do you work in my part of Bloomingdale?
Yes. Our crews work across Bloomingdale, including Old Town Bloomingdale — ZIP 60108 — and nearby Roselle, Glendale Heights, Carol Stream.

Working in Bloomingdale

  • A lot of Bloomingdale kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Bloomingdale homes are single-family. We protect floors and driveways and leave the site clean every day.

Old Town Bloomingdale

ZIP 60108

Kitchen Design & Layout Planning nearby

Planning a kitchen project in Bloomingdale?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback