Hard well water wearing out faucets
On well water, mineral buildup shortens faucet life. We suggest models with serviceable cartridges and talk about softening if the scale is heavy.
Serving Aurora & nearby Batavia, Warrenville
Kitchen Faucet Installation in Aurora, IL
Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Aurora.
- Installers working in Aurora ZIP 60506, 60502, 60505, 60504, 60503
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Kitchen faucet problems we fix in Aurora
We install kitchen faucets in Aurora: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.
Worried about lead at the kitchen tap
If Aurora lists your line as lead, a new faucet plus a filter certified for lead reduction is a sensible step for drinking water.
Faucet loose or wobbling on the sink
Wobbly faucets loosen further over time and start leaking at the deck. A proper re-mount fixes it.
Drip from the spout that won't stop
A steady drip with the handle off means the cartridge or valve seat is worn. We swap the cartridge when it's available, or replace the faucet.
Pull-down sprayer that won't retract
A pull-down head that hangs instead of snapping back usually has a misplaced counterweight or a hose catching under the sink. We fix the routing.
Old two-handle faucet with a side sprayer
Many owners replace the old two-handle setup with a single lever and a pull-down spray. We cover the leftover holes with a deck plate.
Shut-off valves that won't turn
If the valves under the sink are stuck, we shut the water elsewhere and install new ones before connecting the faucet.
Leak under the sink at the faucet lines
Drips under the sink near the faucet shank point to a loose connection or a split hose. We redo the supply side and test it.
What the install includes
- Check the sink and suppliesWe look at the hole layout, the valves and the space under the sink before you choose.
- Clean the deckOld putty, caulk and mineral residue cleaned from the mounting surface.
- Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
- Supply connectionsNew braided supply lines connected and tightened without strain.
- Power for touchless modelsSensor faucet wiring and power placed where it can be serviced.
- Extra holesDeck plate, soap pump or second faucet for any leftover holes.
- Flush and testAerator off, lines flushed of debris, then every joint checked under pressure.
What to pick before the install
Filtered-water and pot-filler tapsA small second faucet for filtered water, or a wall-mounted pot filler by the range.
Deck platesA cover plate that hides extra holes under a single-hole faucet.
Bridge and two-handle faucetsSeparate hot and cold handles on a bridge or widespread base for traditional kitchens.
Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
Touchless and touch faucetsSensor or tap-to-start faucets that need batteries or an outlet under the sink.
What the work looks like in Aurora homes
Before
Installed
DetailAurora kitchen, 1990s two-story colonial: kitchen faucet installation
A 1990s two-story colonial near West Side, a typical kitchen for Aurora. What we started with: solid-surface integrated sink. The reason for the call: a leaking faucet with handles that were hard to turn. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant check the sink and supplies, supply connections, plus extra holes.
Before
AfterWarrenville kitchen, 1990s two-story colonial: kitchen faucet installation
A 1990s two-story colonial near Fox Hollow, a typical kitchen for Warrenville. The kitchen as it was: white cast-iron double sink. The reason for the call: an old two-handle faucet that dripped into a worn porcelain bowl. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. Work included clean the deck, pull-down hose and weight, plus extra holes.
Kitchen Faucet Installation in Warrenville →
Before
AfterA Naperville 1980s two-story: before and after
This one is a 1980s two-story in Naperville. What we started with: white double sink. What bothered the owners most: a faucet too low to fill a stockpot. The result: a new single-handle pull-down faucet with a clean caulk line. On site this meant check the sink and supplies, clean the deck, plus pull-down hose and weight.
Kitchen Faucet Installation in Naperville →
Before
AfterKitchen Plumbing Relocation in a 1980s two-story, Aurora
What changed: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.
Kitchen Plumbing Relocation in Aurora →
Before
AfterBefore and after: a 1980s two-story in Aurora
Cabinets in white uppers and deep green lowers with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Aurora →How the install goes
- Pick a faucetSend the model you like and a photo of your sink.
- Check the setupWe confirm the hole count, valves and clearances.
- Written estimateYou get the price in writing, including any valve replacement.
- Install and testThe faucet goes in, a licensed plumber connects it and we test every joint.
Kitchen Faucet Installation questions from Aurora homeowners
Can a handyman install a kitchen faucet?
Our faucet installs are done by licensed plumbers, which matters when a valve or supply line turns out to need replacing.
Pull-down or pull-out: which should I choose?
Pull-down heads spray straight into the bowl; pull-out heads reach farther toward you. Pick by sink depth and clearance.
Why is my faucet leaking from the base?
The O-rings around the spout have worn. Rebuilding is possible on some faucets; on older ones, replacement is often better.
What does a faucet installation cost?
The faucet type, the condition of the valves and lines and any drilling decide it. We give a written, itemized estimate after we see the sink.
My new faucet doesn't fit my sink holes. What now?
A deck plate covers extra holes; a faucet that needs more holes may need one drilled. We sort it out at install.
What is the Aurora building department phone number?
Permits go through Division of Building and Permits, City of Aurora, phone (630) 256-3130. When your scope needs one, we prepare the application and schedule the inspections.
Does Aurora have lead service lines?
About 16,200 lead service lines; City submitted its service line material inventory to Illinois EPA. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a Aurora-registered contractor for faucet installation?
Contractors must be registered/licensed with the City (application, required testing if applicable, proof of insurance naming the City as additional insured). Homeowners may act as own contractor if owner-occupied 6+ months with a Homeowner Liability Waiver. We take care of that before work starts.
Is Aurora water hard, and does it matter for faucet installation?
Aurora's water source: Fox River surface water plus deep and shallow wells (about 60% surface / 40% well, varies); reported hardness is 7 to 8 grains per gallon (120-137 mg/L). Aerators and cartridges scale faster with harder water.
Does Aurora require a licensed plumber for faucet installation?
Interior plumbing work requires a permit. The City pages do not state plumber licensing rules (Illinois state license applies). Our plumbing connections are made by licensed plumbers.
Do I need a permit for faucet installation in Aurora?
It depends on the scope. Aurora's rule in short: Interior remodels, structural changes and interior plumbing always need a permit; electrical/mechanical may. We handle the permit when one is needed with Division of Building and Permits, City of Aurora.
Do you work in my part of Aurora?
Yes. Our crews work across Aurora, including Near Eastside, Tanner, Riddle Highlands, Palace Street — ZIP 60506, 60502, 60505, 60504, 60503 — and nearby Batavia, Warrenville, Naperville.
Working in Aurora
- A lot of Aurora kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Aurora homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Near EastsideTannerRiddle HighlandsPalace StreetWest SideFar East Side
ZIP 60506ZIP 60502ZIP 60505ZIP 60504ZIP 60503
Kitchen Faucet Installation nearby
Other kitchen services in Aurora
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Garbage Disposal Installation & RepairDisposals unjammed, repaired or replaced, with the drain connected right.
Kitchen Plumbing RelocationMove the sink to the island or another wall, drain and vent done right.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.