Hard well water wearing out faucets
Scale from hard well water is hard on faucets. Choosing one with replaceable parts and treating the water both help.
Serving Batavia & nearby Geneva, St. Charles
Kitchen Faucet Installation in Batavia, IL
Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Batavia.
- Serving Batavia ZIP 60510, 60539
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen faucet problems we fix in Batavia
We install kitchen faucets in Batavia: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.
Old two-handle faucet with a side sprayer
Many owners replace the old two-handle setup with a single lever and a pull-down spray. We cover the leftover holes with a deck plate.
Low flow or a sputtering spout
Before you replace a faucet for low pressure, we check the aerator, the cartridge and the shut-off valves. Often one of them is the cause.
Spout too short or too low
A low spout makes it hard to fill stockpots and leaves water splashing at the back. A high-arc or pull-down faucet gives more room.
Faucet loose or wobbling on the sink
If the faucet turns or tilts when you push the handle, the nut below has backed off. We secure it from inside the cabinet.
Faucet leaking from the base
A puddle at the foot of the faucet each time you use it comes from the spout seals. We rebuild it if parts exist, or install a new one.
Shut-off valves that won't turn
If the valves under the sink are stuck, we shut the water elsewhere and install new ones before connecting the faucet.
Leaking from the handle
Leaks at the lever come from the valve inside the body. We replace the cartridge or the whole faucet, depending on its age.
What we hook up and check
- Check the sink and suppliesA check of the sink holes, shut-offs and clearances so the faucet fits.
- Shut off and removeWater off, supply lines disconnected and the old faucet unbolted.
- Clean the deckThe sink or counter around the holes cleaned so the new base seals.
- Replace valves when neededNew shut-off valves if the old ones won't close or weep.
- Pull-down hose and weightSprayer hose connected and its counterweight placed correctly.
- Supply connectionsHot and cold lines hooked up to the valves.
- Power for touchless modelsSensor faucet wiring and power placed where it can be serviced.
Options to choose from
FinishesChrome wipes clean easily; matte and brushed finishes hide spots.
Filtered-water and pot-filler tapsA small second faucet for filtered water, or a wall-mounted pot filler by the range.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.
Pull-out faucetsA shorter spout with a head that pulls straight out toward you.
Bridge and two-handle faucetsThree-hole faucets with a classic look, often with a side sprayer.
Before and after: kitchens near Batavia
Before
Installed
DetailBatavia kitchen, 1990s two-story colonial: kitchen faucet installation
This one is a 1990s two-story colonial in Batavia. What we started with: solid-surface integrated sink. The main complaint was an old faucet that dripped and was crusted with scale. The result: a new single-handle pull-down faucet with a clean caulk line. The job covered pull-down hose and weight, supply connections, plus power for touchless models.
Before
AfterKitchen Faucet Installation in a 1990s two-story colonial, Geneva
A 1990s two-story colonial near Mill Creek, a typical kitchen for Geneva. What we started with: white cast-iron double sink. What bothered the owners most: handles that leaked and a sprayer that dribbled. After: a new single-handle pull-down faucet with a clean caulk line. On site this meant check the sink and supplies, shut off and remove, plus clean the deck.
Kitchen Faucet Installation in Geneva →
Before
AfterSt. Charles kitchen, two-story colonial from the 1990s: kitchen faucet installation
The site: a two-story colonial from the 1990s in St. Charles. What we started with: white double sink. The reason for the call: a faucet too low to fill a stockpot. The result: a new single-handle pull-down faucet with a clean caulk line. On site this meant shut off and remove, clean the deck, plus supply connections.
Kitchen Faucet Installation in St. Charles →
Before
AfterKitchen Plumbing Relocation in a 1990s two-story colonial, Batavia
A new island with a prep sink, the drain, vent and water lines relocated from the old wall.
Kitchen Plumbing Relocation in Batavia →
Before
AfterKitchen Remodeling in a 1990s two-story colonial, Batavia
Cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in Batavia →How the install goes
- Pick a faucetChoose one yourself or ask us what fits your sink and holes.
- Check the setupWe confirm the hole count, valves and clearances.
- Written estimateAn itemized quote for the install and parts before we start.
- Install and testThe faucet goes in, a licensed plumber connects it and we test every joint.
Kitchen Faucet Installation questions from Batavia homeowners
Why is my faucet leaking from the base?
Worn spout seals. We tell you if a repair kit fixes it or if a new faucet is the better buy.
Can you install a faucet I already bought?
Yes. If anything about it won't suit your sink, we tell you before we start.
How long does it take to install a kitchen faucet?
Often an hour or two. Seized valves, a stuck old faucet or a new hole in stone add time.
Do I need a plumber to install a faucet?
In Illinois, plumbing is done by plumbers licensed by the Illinois Department of Public Health. Our licensed plumbers install and connect your faucet.
Pull-down or pull-out: which should I choose?
Pull-down suits deep sinks and tall clearance; pull-out works better under low cabinets or a window.
What is the Batavia building department phone number?
Permits go through City of Batavia Community & Economic Development - Building Division, phone 630-454-2700. When your scope needs one, we prepare the application and schedule the inspections.
Does Batavia require a licensed plumber for faucet installation?
City adopts the 2014 Illinois Plumbing Code; projects installing new plumbing require a Residential Plumbing Review Sheet. Our plumbing connections are made by licensed plumbers.
Batavia water: how does it affect faucet installation?
Batavia's water source: Groundwater: mix of shallow wells (St. Charles Aquifer) and deep wells (Ironton/Galesville Aquifer); deep-well water gets radium removal; reported hardness is About 25 grains per gallon (city FAQ, general average, not tied to a specific report year). Aerators and cartridges scale faster with harder water.
Do I need a permit for faucet installation in Batavia?
It depends on the scope. Batavia's rule in short: Building permits are required for all construction; a Residential Alteration handout is available. We handle the permit when one is needed with City of Batavia Community & Economic Development - Building Division.
Do you work in my part of Batavia?
Yes. Our crews work across Batavia — ZIP 60510, 60539 — and nearby Geneva, St. Charles, West Chicago.
Working in Batavia
- A lot of Batavia kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Batavia homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Downtown Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
ZIP 60510ZIP 60539
Kitchen Faucet Installation nearby
Other kitchen services in Batavia
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Garbage Disposal Installation & RepairDisposals unjammed, repaired or replaced, with the drain connected right.
Kitchen Plumbing RelocationMove the sink to the island or another wall, drain and vent done right.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.