Serving Park Ridge & nearby Des Plaines, Glenview

Countertop Installation in Park Ridge, IL

New countertops in Park Ridge: talk to a fabricator about slabs, templating and install dates.

  • Serving Park Ridge ZIP 60068
  • A new look without tearing the kitchen out
  • Clean, protected work area every day

Prefer a callback?

Leave your number and a Park Ridge countertop fabricator will call you.

Countertop problems we fix in Park Ridge

Countertop replacement in Park Ridge starts with a template and ends with a sink that is ready to use. We handle tear-out, templating, fabrication and installation, and plan seams where you will barely see them.

Original laminate from the 1950s

Laminate from the 1950s with a built-in backsplash is quick to remove and the most common counter we replace.

Seams that show or separate

A seam you can feel or see from across the room is a fabrication issue. We place seams away from sight lines and the sink.

Cracked or chipped stone

We look at whether a crack is cosmetic or structural. If the slab needs replacing, we match the layout and reuse openings when we can.

Speckled builder granite

Busy speckled granite from the 2000s dates the kitchen. A calm quartz or a veined slab refreshes the look without new cabinets.

Not enough counter space

We extend counters, enlarge the island or add a peninsula, with brackets under any large overhang.

Tile counters with dirty grout

Tile counters trap crumbs and stains in the grout. A single slab surface wipes clean in seconds.

Undermount sink coming loose

A loose undermount sink is a leak waiting to happen. New counters come with the sink properly mounted and sealed.

Counters that stain easily

Unsealed granite and marble absorb oil and wine. Quartz never needs sealing; natural stone needs regular sealing.

What we do on the job

  • Material selectionWe guide you through materials, colors and finishes and reserve your slab.
  • Cabinet check and levelingWe level and shim the bases so stone sits flat and seams stay tight.
  • Digital templatingWe template on site after the cabinets are set, including sink and cooktop positions.
  • Installation and seamsTops set, seams joined with color-matched epoxy, and edges cleaned.
  • Undermount sink mountingWe mount and seal the sink to the stone so it is ready for plumbing.
  • Backsplash optionsShort stone splash, full slab or a tile backsplash afterward.
  • Bathroom vanity topsVanity tops cut from the same slab or remnants.

Options to choose from

GraniteNatural stone with strong heat resistance. Each slab is unique; seal it periodically.
Butcher blockWood tops add warmth and can be refinished; keep them oiled.
Edge profilesMost kitchens get an eased edge; a mitered edge makes thick-looking islands.
Porcelain slabsUltra-durable porcelain that resists heat, stains and UV.
Solid surfaceSeamless acrylic surfaces with integrated sinks; scratches can be sanded out.

Before and after: kitchens near Park Ridge

Countertop Fabrication & Installation in a postwar ranch / cape cod / bi-level — beforeBefore
Countertop Fabrication & Installation in a postwar ranch / cape cod / bi-level — afterAfter
Countertop Fabrication & Installation in a postwar ranch / cape cod / bi-level — detailDetail

A Park Ridge postwar Cape Cod: before and after

The site: a postwar Cape Cod in Park Ridge. The kitchen as it was: light beige laminate and stainless double sink. The main complaint was worn laminate counters. After: charcoal concrete-look quartz countertops with a tight seam, an undermount sink and a new faucet. On site this meant cabinet check and leveling, digital templating, plus undermount sink mounting.

Countertop Installation project in Des Plaines, beforeBefore
Countertop Installation project in Des Plaines, afterAfter

A Des Plaines postwar bi-level: before and after

The site: a postwar bi-level in Des Plaines. What we started with: laminate with an aluminum edge band and stainless double sink. What bothered the owners most: laminate that had seen better days. Finished kitchen: warm walnut butcher block countertops with a tight seam, an undermount sink and a new faucet. On site this meant material selection, cabinet check and leveling, plus undermount sink mounting.

Countertop Installation in Des Plaines →
Countertop Installation project in Glenview, beforeBefore
Countertop Installation project in Glenview, afterAfter

A Glenview postwar Cape Cod: before and after

This one is a postwar Cape Cod near The Park. What we started with: light beige laminate and stainless double sink. The main complaint was laminate that had seen better days. After: black honed granite countertops with a tight seam, an undermount sink and a new faucet. Work included cabinet check and leveling, digital templating, plus undermount sink mounting.

Countertop Installation in Glenview →
Kitchen Backsplash Installation project near Park Ridge, beforeBefore
Kitchen Backsplash Installation project near Park Ridge, afterAfter

Park Ridge kitchen, 1960s ranch: kitchen backsplash installation

Finished: a white 3x12 tile in a stacked pattern backsplash with clean edges and outlets set flush.

Kitchen Backsplash Installation in Park Ridge →
Kitchen Remodeling project near Park Ridge, beforeBefore
Kitchen Remodeling project near Park Ridge, afterAfter

Kitchen Remodeling in a postwar Cape Cod, Park Ridge

Finished: cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.

Kitchen Remodeling in Park Ridge →

Day by day

  1. Choose your materialVisit a slab yard or look at samples at home; we help you choose.
  2. TemplateWe measure the installed cabinets on site with digital templating.
  3. FabricationSlabs are cut, edged and drilled for sink, faucet and cooktop.
  4. InstallationInstallation day: tear-out, set, seam, mount the sink and clean up.
  5. HookupPlumbing goes back on after the sink adhesive sets.

Countertop Installation questions from Park Ridge homeowners

What does countertop installation include?
Template, fabrication, removal of the old tops, installation, seams, sink mounting and cleanup. Plumbing reconnection is usually a separate step.
Quartz or granite — which is better?
Quartz is easier to care for; granite takes heat better and every slab is different. We help you compare.
Will I be without a sink?
For about a day. We plan the hookup right after installation so you're not without water for long.
Do my cabinets need to be replaced for stone?
No — sound cabinets hold stone. We level them and add support under long overhangs.
Do you install backsplashes too?
We can do a matching stone backsplash or tile once the counters are set.
Park Ridge contractor registration: do kitchen contractors need it?
Building contractors must register with the City each calendar year ($50 per firm). We take care of that before work starts.
Do I need a permit for countertop installation in Park Ridge?
It depends on the scope. Park Ridge's rule in short: Park Ridge publishes permit guidelines by project type; contact the Permit Technicians to confirm whether a kitchen project needs a permit. We handle the permit when one is needed.
Do you work in my part of Park Ridge?
Yes. Our crews work across Park Ridge — ZIP 60068 — and nearby Des Plaines, Glenview, Skokie.

Working in Park Ridge

  • A lot of Park Ridge kitchens date from the 1950s. We know these layouts well and what is worth keeping.
  • Most Park Ridge homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Park Ridge building department handles kitchen permits and pull them for you.

ZIP 60068

Countertop Installation nearby

Planning a kitchen project in Park Ridge?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback