1950s stainless double sink
The thin stainless double sink from the 1950s dents and drums. A heavier-gauge single or low-divide bowl is a common replacement.
Serving Park Ridge & nearby Des Plaines, Glenview
Kitchen Sink Installation & Replacement in Park Ridge, IL
Undermount, drop-in and farmhouse sinks set, sealed and connected by licensed plumbers in Park Ridge.
- Serving Park Ridge ZIP 60068
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen sink problems we fix in Park Ridge
A new kitchen sink is part fit, part plumbing. In Park Ridge we check the counter cutout and the cabinet below, mount the bowl so it stays put, and our licensed plumbers reconnect the drain, disposal, dishwasher and faucet.
Old drain parts that won't line up
A new sink often puts the drain in a different spot or depth. We rebuild the trap and tailpieces in new PVC so everything lines up without strain.
Strainer or drain leaking
A leak at the drain flange is usually the strainer, not the sink. We replace it, and with a new sink we always fit new strainers.
Drop-in rim that traps grime
A drop-in rim and its yellowing caulk are hard to keep clean. If the counter is stone or quartz, an undermount sink can often replace it.
New sink doesn't match the counter cutout
Undermount sinks need a cutout that matches their bowl shape. We confirm the size and the reveal before the old sink comes out.
Faucet holes don't match the new faucet
We plan the faucet, sprayer, soap dispenser and any filtered-water tap together, so the holes and the sink line up.
Wanting a farmhouse sink
Converting to a farmhouse sink means changing the front of the sink base and often the countertop cutout. We plan both before ordering.
Sink cabinet floor wet or swollen
Water damage in the sink base usually comes from the strainer, the trap or a failed undermount seal. We repair the cause along with the sink.
What the install includes
- Shut off and disconnectWater shut off, faucet, disposal and dishwasher lines disconnected.
- Remove the old sinkThe old sink taken out without damaging the counter edge.
- Cabinet changes for farmhouse sinksSink base cut down or replaced, with a support frame for the apron sink.
- New strainers and drainNew basket strainers, tailpieces and P-trap assembled to the drain line.
- Faucet and accessoriesYour old faucet reused or a new one mounted on the sink or counter.
- Supply valves and linesFresh supply connections from the valves to the faucet.
- Leak check and cleanupWe test the whole setup under use and clean up the cabinet.
Options to choose from
Farmhouse (apron-front)A deep bowl with an exposed front that needs a modified or dedicated sink base.
Workstation sinksBowls with a ledge for cutting boards, colanders and drying racks.
Granite compositeQuartz or granite composite bowls in solid colors, resistant to scratches.
Enameled cast ironClassic cast iron, often drop-in, that needs a sturdy counter and cabinet.
FireclayGlazed ceramic fired at high heat, common for farmhouse sinks; heavy and glossy.
Before and after: kitchens near Park Ridge
Before
Installed
DetailPark Ridge kitchen, 1980s two-story: kitchen sink installation & replacement
A 1980s two-story in Park Ridge, a typical kitchen for Park Ridge. The kitchen as it was: white cast-iron double sink. What bothered the owners most: a chipped porcelain sink with stains that wouldn't scrub out. After: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant shut off and disconnect, remove the old sink, plus faucet and accessories.
Before
AfterDes Plaines kitchen, two-story colonial from the 1990s: kitchen sink installation & replacement
This one is a two-story colonial from the 1990s in Des Plaines. Before: white double sink. The main complaint was two small bowls where big pots never fit. Finished kitchen: a new undermount stainless single-bowl sink with a pull-down faucet. Work included shut off and disconnect, remove the old sink, plus supply valves and lines.
Kitchen Sink Installation & Replacement in Des Plaines →
Before
AfterKitchen Remodeling in a 1960s ranch, Park Ridge
What changed: cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Park Ridge →
Before
AfterPark Ridge kitchen, 1950s ranch: kitchen cabinet painting
Finished: the same doors sprayed in light warm taupe, new unlacquered brass knobs and cup pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Park Ridge →Install day
- Pick the sinkSend the model you like or let us suggest a few that fit.
- Measure and planA visit to confirm the fit and the connections before ordering.
- Written estimateA clear quote listing the sink work, parts and any cabinet modifications.
- Install and connectThe old sink comes out, the new one is set and a licensed plumber makes the connections.
- Cure and testAdhesive and sealant cure, then we run water and check every joint.
Kitchen Sink Installation & Replacement questions from Park Ridge homeowners
Will Lake Michigan water mark my new sink?
Mineral spots can appear on any sink. Lighter composites and brushed stainless hide them better than dark matte finishes.
Undermount or drop-in: which is better?
Undermount for a clean counter edge, drop-in for simplicity and any counter material. Both drain and work the same.
What size sink fits my cabinet?
The sink base width sets the limit. Most kitchen sinks are made for common base sizes, and we measure inside the cabinet before you buy.
Can you reuse my old faucet and disposal?
Often. We check whether the faucet suits the new hole layout and whether the disposal mounts to the new flange.
How long does a sink replacement take?
Usually one visit for a drop-in, sometimes a return visit for an undermount after the bond cures.
What is Park Ridge doing about lead water lines?
Lead service lines are more likely in homes built before 1986; the City runs a lead service line replacement program. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a Park Ridge-registered contractor for sink replacement?
Building contractors must register with the City each calendar year ($50 per firm). We take care of that before work starts.
Is Park Ridge water hard, and does it matter for sink replacement?
Park Ridge's water source: Lake Michigan water purchased from the City of Chicago. We plan fittings and filters around it.
Do I need a permit for sink replacement in Park Ridge?
It depends on the scope. Park Ridge's rule in short: Park Ridge publishes permit guidelines by project type; contact the Permit Technicians to confirm whether a kitchen project needs a permit. We handle the permit when one is needed.
Do you work in my part of Park Ridge?
Yes. Our crews work across Park Ridge — ZIP 60068 — and nearby Des Plaines, Glenview, Skokie.
Working in Park Ridge
- A lot of Park Ridge kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Park Ridge homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Park Ridge building department handles kitchen permits and pull them for you.
ZIP 60068
Kitchen Sink Installation & Replacement nearby
Other kitchen services in Park Ridge
Kitchen Faucet InstallationFaucet swaps and new pull-down faucets.
Kitchen Sink Leak & Drain RepairLeaking traps, strainers and drain pipes under the sink, fixed.
Appliance Water Line InstallationFridge, ice maker and pot filler lines with a real shut-off valve.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.