Serving Oak Park & nearby Berwyn, Chicago

Kitchen Sink Installation & Replacement in Oak Park, IL

Undermount, drop-in and farmhouse sinks set, sealed and connected by licensed plumbers in Oak Park.

  • Installers working in Oak Park ZIP 60302, 60304, 60301
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Oak Park licensed plumber will call you.

Kitchen sink problems we fix in Oak Park

Swapping a sink looks simple until the new bowl doesn't match the cutout or the drain lands in the wrong spot. Our Oak Park crew measures first, then sets the sink and has a licensed plumber hook up the drain and supplies.

Original sink in an older Oak Park kitchen

Swapping a sink in an older home sometimes means updating the drain arm and the valves too. We check them before work starts.

Condo sink replacement

Your sink drains into a stack shared with neighbors. We work on your unit's side carefully and tell you if anything belongs to the building.

Drop-in rim that traps grime

Grime along the rim of a drop-in sink is a common complaint. Undermount is cleaner, but it needs a solid-surface or stone counter with a finished cutout edge.

Dated sink in an otherwise good kitchen

If the counters and cabinets are fine, replacing only the sink is a contained job. We keep the countertop intact.

Double bowl too small for big pans

Many owners trade a divided sink for one wide basin. We reconfigure the drain for the single outlet and reconnect the disposal.

Old drain parts that won't line up

Mixed old and new drain parts are where leaks start. With a new sink we replace the trap assembly instead of forcing the old one to fit.

Chipped or stained porcelain sink

Enameled cast iron and porcelain chip down to dark metal and hold stains no cleaner removes. Replacement is the lasting fix.

Sink installed with the counter replacement

When counters are replaced, the sink is set to the new tops and our licensed plumber reconnects the drain, faucet and disposal.

What the install includes

  • Measure the cutout and cabinetWe measure the counter opening, the sink base and the drain position before you pick a sink.
  • Shut off and disconnectWater shut off, faucet, disposal and dishwasher lines disconnected.
  • Cabinet changes for farmhouse sinksSink base cut down or replaced, with a support frame for the apron sink.
  • Set and seal the sinkUndermount sinks clipped and bonded; drop-ins bedded in sealant and clamped.
  • New strainers and drainNew basket strainers, tailpieces and P-trap assembled to the drain line.
  • Disposal and dishwasher hookupAppliance connections restored with a high loop or air gap as code requires.
  • Leak check and cleanupBoth bowls filled and drained, every joint checked dry.

What to pick before the install

Farmhouse (apron-front)A deep bowl with an exposed front that needs a modified or dedicated sink base.
Workstation sinksSinks with built-in rails that hold accessories over the basin.
Granite compositeQuartz or granite composite bowls in solid colors, resistant to scratches.
Enameled cast ironVery heavy and long-lasting, with a glossy enamel that can chip if struck.
Stainless steelEasy-care steel; a lower gauge number means thicker metal.

What the work looks like in Oak Park homes

Kitchen Sink Installation & Replacement in a prewar house — beforeBefore
Kitchen Sink Installation & Replacement in a prewar house — installedInstalled
Kitchen Sink Installation & Replacement in a prewar house — detailDetail

Before and after: a prewar foursquare in Oak Park

A prewar foursquare near Gunderson Historic District, a typical kitchen for Oak Park. What we started with: stainless double sink under a window. What bothered the owners most: two small bowls where big pots never fit. After: a new undermount stainless single-bowl sink with a pull-down faucet. Work included measure the cutout and cabinet, set and seal the sink, plus new strainers and drain.

Kitchen Sink Installation & Replacement project in Elmhurst, beforeBefore
Kitchen Sink Installation & Replacement project in Elmhurst, afterAfter

Elmhurst kitchen, 1990s two-story colonial: kitchen sink installation & replacement

This one is a 1990s two-story colonial in Elmhurst. The kitchen as it was: solid-surface integrated sink. The main complaint was a scratched integrated sink that never looked clean. The result: a new undermount stainless single-bowl sink with a pull-down faucet. Work included set and seal the sink, new strainers and drain, plus disposal and dishwasher hookup.

Kitchen Sink Installation & Replacement in Elmhurst →
Kitchen Sink Installation & Replacement project in Park Ridge, beforeBefore
Kitchen Sink Installation & Replacement project in Park Ridge, afterAfter

Park Ridge kitchen, 1990s two-story colonial: kitchen sink installation & replacement

The site: a 1990s two-story colonial in Park Ridge. The kitchen as it was: white cast-iron double sink. The main complaint was worn enamel and rust spots in the old bowl. Finished kitchen: a new undermount stainless single-bowl sink with a pull-down faucet. Work included measure the cutout and cabinet, shut off and disconnect, plus set and seal the sink.

Kitchen Sink Installation & Replacement in Park Ridge →
Kitchen Remodeling project near Oak Park, beforeBefore
Kitchen Remodeling project near Oak Park, afterAfter

An Oak Park 1920s bungalow: before and after

Soft sage-green inset-style cabinets with unlacquered brass hardware, honed white marble-look quartz counters, a white handmade-look square tile backsplash, restored oak strip floor and schoolhouse pendant lights.

Kitchen Remodeling in Oak Park →
Kitchen Cabinet Painting project near Oak Park, beforeBefore
Kitchen Cabinet Painting project near Oak Park, afterAfter

Kitchen Cabinet Painting in a prewar foursquare, Oak Park

The same doors sprayed in soft white, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Oak Park →

How the install goes

  1. Pick the sinkSend the model you like or let us suggest a few that fit.
  2. Measure and planWe check the cutout, the cabinet and the drain, and plan any cabinet changes.
  3. Written estimateYou get an itemized estimate for removal, installation and plumbing.
  4. Install and connectWe mount the sink and hook up the drain, faucet and appliances.
  5. Cure and testAdhesive and sealant cure, then we run water and check every joint.

Kitchen Sink Installation & Replacement questions from Oak Park homeowners

Will Lake Michigan water mark my new sink?
Some spotting is normal. A quick dry-off and an occasional vinegar rinse keep the bowl clean.
What does a farmhouse sink need?
Space in the sink base, a support frame for the weight and a counter cut for the apron style.
Who would you call to install a new sink?
For a straight swap, a plumber. If the counter or cabinet changes too, a crew that handles both saves a second visit.
How long does a sink replacement take?
A straight swap is often done in a day. Undermount adhesive needs time to cure before heavy use, and farmhouse conversions take longer.
Do you need a plumber to install a kitchen sink?
In Illinois, plumbing connections are work for plumbers licensed by the Illinois Department of Public Health. Our licensed plumbers make the drain and supply connections.
Oak Park plumbing code: who can do the plumbing for sink replacement?
Separate plumbing permit required; single-family owners may obtain permit by affidavit to do work themselves. Our plumbing connections are made by licensed plumbers.
Do Oak Park condo associations need to approve sink replacement?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Oak Park water: how does it affect sink replacement?
Oak Park's water source: Lake Michigan water purchased from the City of Chicago. We plan fittings and filters around it.
Do I need a Oak Park-registered contractor for sink replacement?
Contractors must be registered with the Village and keep a valid certificate of insurance uploaded in Village View. We take care of that before work starts.
What is the Oak Park building department phone number?
Permits go through Permit & Development Division (Development Services Department), phone 708-358-5430. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for sink replacement in Oak Park?
It depends on the scope. Oak Park's rule in short: Permits needed for installing new cabinets and countertops and for any extension or alteration of electrical, plumbing or HVAC systems; separate electrical and plumbing permits. We handle the permit when one is needed with Permit & Development Division (Development Services Department).
Do you work in my part of Oak Park?
Yes. Our crews work across Oak Park, including Ridgeland-Oak Park Historic District, Gunderson Historic District, Harrison Street arts district — ZIP 60302, 60304, 60301 — and nearby Berwyn, Chicago, Elmhurst.

Working in Oak Park

  • Most Oak Park homes are prewar. We work around plaster walls, radiators and out-of-square rooms every week.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • Live in the Ridgeland/Oak Park Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

Ridgeland-Oak Park Historic DistrictGunderson Historic DistrictHarrison Street arts district

ZIP 60302ZIP 60304ZIP 60301

Kitchen Sink Installation & Replacement nearby

Planning a kitchen project in Oak Park?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback