Scale on the aerator from lake water
Treated Lake Michigan water still leaves some mineral scale in aerators and spray heads over time. Cleaning them restores the spray pattern.
Serving Oak Park & nearby Berwyn, Chicago
Kitchen Faucet Installation in Oak Park, IL
Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Oak Park.
- Installers working in Oak Park ZIP 60302, 60304, 60301
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Kitchen faucet problems we fix in Oak Park
We install kitchen faucets in Oak Park: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.
Worried about lead at the kitchen tap
Faucets sold for drinking water must meet federal lead-free rules. The bigger concern in older homes is the service line; flush before drinking and consider a lead-certified filter.
Low flow or a sputtering spout
A spout that spits or barely runs usually has debris or mineral buildup in the aerator. If cleaning doesn't help, the cartridge or supply valve may be partly blocked.
Wanting a touchless faucet
A touchless kitchen faucet is a standard install with one extra piece: the control box and its power supply. We fit both.
Faucet leaking from the base
When the faucet leaks where it meets the sink, either the internal seals or the mounting gasket has failed. We find which and fix it.
Shut-off valves that won't turn
Faucet swaps often stop at the valves: old multi-turn stops seize or leak when turned. We replace them with quarter-turn valves.
Drip from the spout that won't stop
Drips that keep going no matter how you set the lever point to the cartridge. It's a repair on a good faucet and a replacement on a tired one.
Old two-handle faucet with a side sprayer
Separate hot and cold handles and a side sprayer that leaks are a common reason to upgrade. A single-handle pull-down does both jobs in one.
Included with the install
- Shut off and removeWater off, supply lines disconnected and the old faucet unbolted.
- Clean the deckOld putty, caulk and mineral residue cleaned from the mounting surface.
- Replace valves when neededNew shut-off valves if the old ones won't close or weep.
- Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
- Supply connectionsNew braided supply lines connected and tightened without strain.
- Extra holesUnused holes covered or fitted with a soap dispenser or filtered-water tap.
- Flush and testWe run hot and cold, test the sprayer and look for drips below.
Models, parts and fittings
Filtered-water and pot-filler tapsExtra taps that use a spare hole or a separate supply line.
FinishesStainless, chrome, matte black and brass finishes, each with its own care.
Touchless and touch faucetsSensor or tap-to-start faucets that need batteries or an outlet under the sink.
Deck platesTrim that lets a one-hole faucet sit cleanly on a three-hole sink.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.
Kitchen Faucet Installation before and after — Oak Park homes
Before
Installed
DetailBefore and after: a vintage courtyard condo in Oak Park
The site: a vintage courtyard condo near Harrison Street arts district. The kitchen as it was: single stainless drop-in sink. What bothered the owners most: a leaking faucet with handles that were hard to turn. The result: a new single-handle pull-down faucet with a clean caulk line. On site this meant shut off and remove, clean the deck, plus flush and test.
Before
AfterBefore and after: a 1920s bungalow in Berwyn
This one is a 1920s bungalow near Depot District. The kitchen as it was: white porcelain sink. What bothered the owners most: an old two-handle faucet that dripped into a worn porcelain bowl. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. Work included replace valves when needed, supply connections, plus flush and test.
Kitchen Faucet Installation in Berwyn →
Before
AfterAn Elmhurst 1980s two-story: before and after
A 1980s two-story in Elmhurst, a typical kitchen for Elmhurst. What we started with: white double sink. The main complaint was a leaking two-handle faucet with a side sprayer. The result: a new single-handle pull-down faucet with a clean caulk line. The job covered pull-down hose and weight, supply connections, plus extra holes.
Kitchen Faucet Installation in Elmhurst →
Before
AfterKitchen Plumbing Relocation in a prewar brick bungalow, Oak Park
Finished: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.
Kitchen Plumbing Relocation in Oak Park →
Before
AfterAn Oak Park prewar brick bungalow: before and after
Finished: soft sage-green inset-style cabinets with unlacquered brass hardware, honed white marble-look quartz counters, a white handmade-look square tile backsplash, restored oak strip floor and schoolhouse pendant lights.
Kitchen Remodeling in Oak Park →How the install goes
- Pick a faucetChoose one yourself or ask us what fits your sink and holes.
- Check the setupA quick look under the sink tells us what else the job needs.
- Written estimateAn itemized quote for the install and parts before we start.
- Install and testThe faucet goes in, a licensed plumber connects it and we test every joint.
Kitchen Faucet Installation questions from Oak Park homeowners
Do I need a plumber to install a faucet?
In Illinois, plumbing is done by plumbers licensed by the Illinois Department of Public Health. Our licensed plumbers install and connect your faucet.
What does a faucet installation cost?
A plain swap costs less than a touchless install with new valves. You get a line-item price before work starts.
Repair or replace a dripping faucet?
If the faucet is fairly new and parts are available, repair. If it's old, corroded or leaking in several places, replace.
Can you install a faucet I already bought?
Yes. If anything about it won't suit your sink, we tell you before we start.
Should I replace the shut-off valves too?
We test them first. Valves that are stiff, crusted or weeping get replaced with quarter-turn ones.
Oak Park water: how does it affect faucet installation?
Oak Park's water source: Lake Michigan water purchased from the City of Chicago. Aerators and cartridges scale faster with harder water.
Do Oak Park condo associations need to approve faucet installation?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
What is Oak Park doing about lead water lines?
Village is facilitating replacement of lead/galvanized-requiring-replacement lines under Illinois law; inventory lookup at leadfreeoakpark.com. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Does Oak Park require a licensed plumber for faucet installation?
Separate plumbing permit required; single-family owners may obtain permit by affidavit to do work themselves. Our plumbing connections are made by licensed plumbers.
Oak Park contractor registration: do kitchen contractors need it?
Contractors must be registered with the Village and keep a valid certificate of insurance uploaded in Village View. We take care of that before work starts.
Do I need a permit for faucet installation in Oak Park?
It depends on the scope. Oak Park's rule in short: Permits needed for installing new cabinets and countertops and for any extension or alteration of electrical, plumbing or HVAC systems; separate electrical and plumbing permits. We handle the permit when one is needed with Permit & Development Division (Development Services Department).
Do you work in my part of Oak Park?
Yes. Our crews work across Oak Park, including Ridgeland-Oak Park Historic District, Gunderson Historic District, Harrison Street arts district — ZIP 60302, 60304, 60301 — and nearby Berwyn, Chicago, Elmhurst.
Working in Oak Park
- Most Oak Park homes are prewar. We work around plaster walls, radiators and out-of-square rooms every week.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- Live in the Ridgeland/Oak Park Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Ridgeland-Oak Park Historic DistrictGunderson Historic DistrictHarrison Street arts district
ZIP 60302ZIP 60304ZIP 60301
Kitchen Faucet Installation nearby
Other kitchen services in Oak Park
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Garbage Disposal Installation & RepairDisposals unjammed, repaired or replaced, with the drain connected right.
Kitchen Plumbing RelocationMove the sink to the island or another wall, drain and vent done right.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.