Scale on the aerator from lake water
White crust on the spray face is mineral buildup. Many Park Ridge owners just need the aerator cleaned or swapped, not a new faucet.
Serving Park Ridge & nearby Des Plaines, Glenview
Kitchen Faucet Installation in Park Ridge, IL
Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Park Ridge.
- Serving Park Ridge ZIP 60068
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen faucet problems we fix in Park Ridge
We install kitchen faucets in Park Ridge: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.
Worried about lead at the kitchen tap
Faucets sold for drinking water must meet federal lead-free rules. The bigger concern in older homes is the service line; flush before drinking and consider a lead-certified filter.
Leaking from the handle
Water seeping out around the handle when the faucet runs is a cartridge or stem seal problem. Some brands make it easy to fix; others are cheaper to replace.
Pull-down sprayer that won't retract
Sprayer heads that droop often need the weight moved or a worn hose replaced. It's a quick fix.
Faucet loose or wobbling on the sink
Wobbly faucets loosen further over time and start leaking at the deck. A proper re-mount fixes it.
Spout too short or too low
A low spout makes it hard to fill stockpots and leaves water splashing at the back. A high-arc or pull-down faucet gives more room.
Wanting a touchless faucet
Touchless faucets need power under the sink, either batteries or a plug-in adapter. We plan the control box and its power when we install.
Faucet leaking from the base
Water pooling around the base of the spout usually means worn O-rings inside the swivel. On an older faucet, replacement is often the better call.
What we hook up and check
- Check the sink and suppliesWe look at the hole layout, the valves and the space under the sink before you choose.
- Clean the deckOld putty, caulk and mineral residue cleaned from the mounting surface.
- Replace valves when neededNew shut-off valves if the old ones won't close or weep.
- Mount the faucetNew faucet mounted level and secure on the sink or counter.
- Supply connectionsHot and cold lines hooked up to the valves.
- Extra holesUnused holes covered or fitted with a soap dispenser or filtered-water tap.
- Flush and testAerator off, lines flushed of debris, then every joint checked under pressure.
Options to choose from
Touchless and touch faucetsSensor or tap-to-start faucets that need batteries or an outlet under the sink.
Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
Bridge and two-handle faucetsThree-hole faucets with a classic look, often with a side sprayer.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.
Deck platesA cover plate that hides extra holes under a single-hole faucet.
Before and after: kitchens near Park Ridge
Before
Installed
DetailPark Ridge kitchen, 1980s two-story: kitchen faucet installation
A 1980s two-story in Park Ridge, a typical kitchen for Park Ridge. What we started with: white cast-iron double sink. What bothered the owners most: an old two-handle faucet that dripped into a worn porcelain bowl. The result: a new single-handle pull-down faucet with a clean caulk line. On site this meant replace valves when needed, supply connections, plus extra holes.
Before
AfterKitchen Faucet Installation in a 1990s two-story colonial, Des Plaines
This one is a 1990s two-story colonial in Des Plaines. What we started with: white double sink. What bothered the owners most: a faucet too low to fill a stockpot. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. Work included check the sink and supplies, replace valves when needed, plus extra holes.
Kitchen Faucet Installation in Des Plaines →
Before
AfterBefore and after: a 1990s two-story colonial in Skokie
This one is a 1990s two-story colonial in Skokie. The kitchen as it was: solid-surface integrated sink. What bothered the owners most: a leaking faucet with handles that were hard to turn. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant replace valves when needed, mount the faucet, plus flush and test.
Kitchen Faucet Installation in Skokie →
Before
AfterKitchen Plumbing Relocation in a postwar Cape Cod, Park Ridge
A new island with a prep sink, the drain, vent and water lines relocated from the old wall.
Kitchen Plumbing Relocation in Park Ridge →
Before
AfterKitchen Remodeling in a postwar Cape Cod, Park Ridge
Cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Park Ridge →How the install goes
- Pick a faucetChoose one yourself or ask us what fits your sink and holes.
- Check the setupWe confirm the hole count, valves and clearances.
- Written estimateAn itemized quote for the install and parts before we start.
- Install and testInstalled, flushed and checked for leaks, usually in one visit.
Kitchen Faucet Installation questions from Park Ridge homeowners
Why is my faucet leaking from the base?
Usually failed internal O-rings at the swivel. Less often, the mounting gasket.
Are touchless faucets worth it?
For people who cook a lot, yes: no greasy handles. They need batteries or power under the sink and a little more upkeep.
How long does it take to install a kitchen faucet?
Often an hour or two. Seized valves, a stuck old faucet or a new hole in stone add time.
Should I replace the shut-off valves too?
Often yes. A new faucet on old valves is the most common setup for a future leak.
Can a handyman install a kitchen faucet?
Plumbing in Illinois is licensed work. When we install a faucet, a licensed plumber does it and can replace seized valves on the spot.
Is Park Ridge water hard, and does it matter for faucet installation?
Park Ridge's water source: Lake Michigan water purchased from the City of Chicago. Aerators and cartridges scale faster with harder water.
Do I need a Park Ridge-registered contractor for faucet installation?
Building contractors must register with the City each calendar year ($50 per firm). We take care of that before work starts.
What is Park Ridge doing about lead water lines?
Lead service lines are more likely in homes built before 1986; the City runs a lead service line replacement program. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a permit for faucet installation in Park Ridge?
It depends on the scope. Park Ridge's rule in short: Park Ridge publishes permit guidelines by project type; contact the Permit Technicians to confirm whether a kitchen project needs a permit. We handle the permit when one is needed.
Do you work in my part of Park Ridge?
Yes. Our crews work across Park Ridge — ZIP 60068 — and nearby Des Plaines, Glenview, Skokie.
Working in Park Ridge
- A lot of Park Ridge kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Park Ridge homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Park Ridge building department handles kitchen permits and pull them for you.
ZIP 60068
Kitchen Faucet Installation nearby
Other kitchen services in Park Ridge
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Garbage Disposal Installation & RepairDisposals unjammed, repaired or replaced, with the drain connected right.
Kitchen Plumbing RelocationMove the sink to the island or another wall, drain and vent done right.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.