Condo kitchens with no outside vent
Condo buildings often limit holes through exterior walls. A recirculating setup works without one, and we handle building access and work hours.
Serving Itasca & nearby Wood Dale, Elk Grove Village
Microwave Installation in Itasca, IL
Over-the-range, drawer and built-in microwaves installed in Itasca: anchored into the wall, bolted to the cabinet and vented the right way.
- Installers working in Itasca ZIP 60143
- Hookups by licensed trades where the code calls for it
- Old unit hauled away on request
Microwave installs we take on in Itasca
Most microwave calls we get in Itasca are one of three jobs: a new over-the-range unit replacing an old one or a hood, a drawer model going into an island, or a built-in with a trim kit set into a wall cabinet. Each has its own cutout, power and venting needs, and we sort those out first.
Microwave drawer in an island or base cabinet
Drawer models need an exact opening, support underneath and a receptacle where the drawer won't hit it. We set all three before sliding the unit in.
Should it vent outside or recirculate?
Microwaves ship ready for outside venting or recirculation, and the blower often has to be rotated for your setup. We match it to the duct you have.
Over-the-range microwave replacing a range hood
A hood is usually hardwired and has no outlet above it, while an over-the-range microwave plugs into a receptacle in the cabinet. We add the outlet, reuse or adapt the duct and hang the new unit.
Built-in microwave with a trim kit
Placing a microwave above a wall oven or in a tall pantry cabinet takes a precise cutout and an outlet inside. We prepare both and install the kit.
Moving the microwave off the counter
Getting the microwave off the counter usually means an over-the-range unit or a drawer model in a base cabinet. We tell you what each needs before you pick.
Convection or air-fry microwave on an old circuit
An air-fryer microwave over the range does more work than a basic one. If the outlet shares a circuit with the counter, an electrician separates it.
Duct that doesn't line up with the new unit
The exhaust opening on a new microwave may sit inches away from the old hood duct. We fit a transition piece or adjust the opening so air moves without leaks.
Included with the install
- Pre-install checkMeasurements, power and venting are checked against the installation instructions.
- Studs located and wall plate mountedThe mounting plate is leveled and screwed into studs per the template.
- Cabinet drilled to the templateHoles for the top bolts, the power cord and a top vent cut through the cabinet bottom.
- Blower set and duct connectedThe fan is set for outside venting through the wall or roof, or for recirculation with a filter.
- Unit hung and boltedThe unit is hooked on the bracket, bolted from above and checked for level.
- Drawer and built-in cutoutsBase or wall cabinet openings sized to the maker's spec, with support and trim kits fitted.
- Testing and haul-awayHeating, exhaust and light tested, old appliance and boxes removed.
Options to choose from
Built-in and trim-kit microwavesMicrowaves set into a wall or pantry cabinet with a finishing trim.
Venting partsDamper, duct transitions, charcoal filters and wall or roof caps.
Convection and air-fry combosMulti-mode microwaves that can stand in for a second oven.
Low-profile over-the-range modelsSlimmer microwaves for kitchens with limited space over the range.
Over-the-range microwavesThe most common type: a microwave and a vent fan in one unit over the cooktop.
Before and after: kitchens near Itasca
Before
Installed
DetailBefore and after: a 1980s two-story in Itasca
This one is a 1980s two-story in Itasca. What we started with: black appliances. What bothered the owners most: an over-the-range unit that sagged off its bracket. After: a new over-the-range microwave installed above the range and vented. The job covered cabinet drilled to the template, unit hung and bolted, plus drawer and built-in cutouts.
Before
AfterBefore and after: a two-story colonial from the 1990s in Addison
This one is a two-story colonial from the 1990s in Addison. Before: white appliances. The main complaint was an old hood and a countertop microwave eating prep space. The result: a new over-the-range microwave installed above the range and vented. Work included pre-install check, cabinet drilled to the template, plus testing and haul-away.
Microwave Installation in Addison →
Before
AfterItasca kitchen, 1990s two-story colonial: kitchen remodeling
Cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Itasca →
Before
AfterBefore and after: a 1990s two-story colonial in Itasca
What changed: the same doors sprayed in deep navy, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Itasca →From the old unit to the new one
- Send the model and photosShare the model number and photos of the range wall, the cabinet above and the old unit.
- Fit and power checkClearances, power and duct are checked against the installation guide.
- Written estimateAn itemized estimate covering removal, mounting, venting and any outlet or cabinet work.
- Install and testOld unit down, new one mounted and vented, everything tested and the old microwave hauled off.
Microwave Installation questions from Itasca homeowners
Can an over-the-range microwave vent outside in a Itasca condo?
Only where there's an existing exterior duct and the association allows it. Otherwise we install it to recirculate.
How high should an over-the-range microwave be above the stove?
It depends on the model's installation guide and your upper cabinet. We measure before you buy so it fits with the required clearance.
What size over-the-range microwave fits my kitchen?
Standard models fit most ranges. Low cabinets or a wider pro range may call for a low-profile unit or a hood instead.
Can you put a microwave drawer in my island?
Usually, if there's a base cabinet of the right width and power can reach it. We cut the opening and add the outlet.
Can you install a microwave I bought at a big-box store or online?
We do. Send the model number and we bring the mounting and vent parts it needs.
Do Itasca condo associations need to approve microwave installation?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Itasca building permit for microwave installation: where do I apply?
Permits go through Community Development Department (Building Division), phone (630) 773-5568. When your scope needs one, we prepare the application and schedule the inspections.
What happens to the old appliance in Itasca?
Republic Services handles weekly curbside residential collection; page gives no bulk/appliance/Freon rules. If you'd rather not deal with it, we haul old units and debris away.
Itasca contractor registration: do kitchen contractors need it?
Contractors must register with the Village and be bonded before a permit is issued; Certificate of Insurance naming the Village required. We take care of that before work starts.
What does Itasca ask for on electrical work?
Electrical contractors must hold a State of Illinois electrical license and post a $5,000 Code Compliance Bond to register with the Village. New circuits and wiring are done by licensed electricians.
Do you work in my part of Itasca?
Yes. Our crews work across Itasca, including North Side, South Side, Nordic Park, The Ranchettes — ZIP 60143 — and nearby Wood Dale, Elk Grove Village, Addison.
Working in Itasca
- A lot of Itasca kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- Live in the Itasca Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
North SideSouth SideNordic ParkThe RanchettesItasca Historical DistrictWalnut Street downtown
ZIP 60143
Microwave Installation nearby
Other kitchen services in Itasca
Dishwasher InstallationOld unit out, new dishwasher connected, leveled and leak-tested.
Oven, Range & Cooktop InstallationGas and electric ranges, wall ovens and cooktops, safely connected.
Built-In Refrigerator InstallationBuilt-in and panel-ready fridges fitted flush, anchored and connected.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.