Musty smell with no mold in sight
Odor is often the first sign. We find the wet area and open it only where needed.
Serving Hanover Park & nearby Bartlett, Roselle
Kitchen Mold Remediation in Hanover Park, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Hanover Park kitchens.
- Crews covering Hanover Park ZIP 60133
- We stop the cause first, then dry, clean and rebuild
- Photos and notes you can share with your insurer
Kitchen mold problems we take care of in Hanover Park
Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In Hanover Park we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.
Mold under the sink with no visible leak
If mold came back after cleaning and nothing seems to drip, we look for hidden moisture with meters and run the fixtures while we watch.
Mold behind the refrigerator
Spots on the wall behind the refrigerator usually trace to the water line. We stop it and clean or replace the drywall.
Mold on cabinet backs and particleboard
Particleboard and MDF absorb water and hold it, so mold grows into them, not just on top. Those panels are replaced rather than cleaned.
Mold behind or under the dishwasher
A leaking door seal or drain hose can keep the floor and wall behind the dishwasher damp for months. We pull the unit and check the subfloor, side panels and drywall.
Mold found during a remodel
Pulling out old cabinets often exposes mold on the wall or floor behind them. We contain the area and remove it before new materials go in.
Mold under the kitchen sink
Mold inside the sink cabinet is a symptom. We trace the water, cut out the affected cabinet bottom or back and check the wall behind it.
A large area of mold
Large-area mold is handled with full containment and HEPA filtration, and we may suggest independent testing beforehand.
What we handle after the damage
- Inspection and moisture readingsWe look at the visible growth, check surrounding materials with a meter and find the moisture source.
- Fixing the moisture sourceThe leak, drip or condensation problem is repaired, or we tell you who needs to fix it first.
- HEPA air filtrationAir scrubbers with HEPA filters run during the work, often with negative pressure on the containment.
- Removing affected porous materialsMaterials mold has grown into are removed rather than cleaned.
- Cleaning what staysSolid materials that remain are cleaned of growth and debris.
- DryingThe area is dried and checked with meters before anything is closed up.
- Final cleaningA detailed cleanup of the work area finishes the remediation.
Methods and equipment
Replacement panels and drywallMaterials to rebuild the area after remediation.
HEPA vacuumsVacuums with HEPA filters used to clean surfaces and debris.
Moisture metersReadings that show where moisture is and when drying is done.
Mold-resistant materialsOptions that hold up better in a spot that has seen water.
HEPA air scrubbersAir filtration machines that capture fine particles during removal.
Kitchen Mold Remediation before and after — Hanover Park homes
Problem
Fixed
DetailBefore and after: a 1980s two-story in Hanover Park
This one is a 1980s two-story in Hanover Park. The kitchen as it was: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: black spots on the back of the sink base. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included removing affected porous materials, drying, plus final cleaning.
Before
AfterA Bartlett 1990s two-story colonial: before and after
The site: a 1990s two-story colonial in Bartlett. The kitchen as it was: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. What bothered the owners most: mold under the kitchen sink. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included HEPA air filtration, drying, plus final cleaning.
Kitchen Mold Remediation in Bartlett →
Before
AfterRoselle kitchen, 1980s two-story: kitchen mold remediation
A 1980s two-story in Roselle, a typical kitchen for Roselle. The kitchen as it was: solid-surface integrated sink and golden-oak cabinets with oak soffits above. What bothered the owners most: mold under the kitchen sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant inspection and moisture readings, cleaning what stays, plus final cleaning.
Kitchen Mold Remediation in Roselle →
Before
AfterHanover Park kitchen, 1970s tract home: kitchen remodeling
What changed: cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Hanover Park →
Before
AfterBefore and after: a raised ranch in Hanover Park
What changed: the same doors sprayed in sage green, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Hanover Park →How restoration goes
- InspectWe look at the mold, find the moisture source and measure how far it reaches.
- Fix the moistureThe leak or condensation is repaired before removal begins.
- Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
- Dry and rebuildOnce dry and clean, the kitchen is put back together.
Kitchen Mold Remediation questions from Hanover Park homeowners
What affects the cost of mold remediation?
Area, access, materials removed and rebuilding are the main factors. We price it after we've seen it.
Can mold be removed without replacing my cabinets?
Plywood and solid wood can often be cleaned; particleboard with growth is replaced. Whole cabinets rarely need to go.
Can we stay home while you work?
Usually yes, with the work area sealed off. If anyone in the household prefers to be away during removal, we can schedule around that.
What causes mold under the kitchen sink?
Moisture: a leaking drain joint, supply line, disposal, dishwasher hose or a sweating cold pipe. Remove the moisture and the mold has nothing to grow on.
How long does kitchen mold remediation take?
A contained sink-base job is short; a wall cavity takes longer. We give you a schedule after the inspection.
Does kitchen mold remediation need a Hanover Park building permit, and who files it?
Permits go through Inspectional Services Division (Hanover Park Fire Department), phone 630-823-5860. When your scope needs one, we prepare the application and schedule the inspections.
Do you work in my part of Hanover Park?
Yes. Our crews work across Hanover Park, including Ontarioville — ZIP 60133 — and nearby Bartlett, Roselle, Bloomingdale.
Working in Hanover Park
- A lot of Hanover Park kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Hanover Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Ontarioville
ZIP 60133
Kitchen Mold Remediation nearby
Other kitchen services in Hanover Park
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.