Mold from a neighbor's leak
Leaks from a neighboring unit can lead to growth in your ceiling or walls. We remove it and record what we find for the association and insurers.
Serving Carol Stream & nearby Glendale Heights, Winfield
Kitchen Mold Remediation in Carol Stream, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Carol Stream kitchens.
- Crews covering Carol Stream ZIP 60188
- We stop the cause first, then dry, clean and rebuild
- Photos and notes you can share with your insurer
Kitchen mold problems we take care of in Carol Stream
Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In Carol Stream we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.
Mold on cabinet backs and particleboard
We remove mold-affected particleboard and match new panels to the cabinet where we can.
Mold under the sink with no visible leak
No puddle doesn't mean no moisture. Slow seepage, sweating pipes or an old leak that was never dried can feed growth under a sink.
Mold found during a remodel
Pulling out old cabinets often exposes mold on the wall or floor behind them. We contain the area and remove it before new materials go in.
Condensation and window mold
Cooking steam without a working range hood can condense on cold windows and exterior walls, leading to growth on sills and drywall. We remove it and talk through ventilation.
Mold under the kitchen sink
The sink base is the most common place we find kitchen mold. A drain or supply drip keeps the particleboard damp, and that panel usually has to be replaced.
Mold that keeps coming back
If cleaning hasn't kept it away, the material is likely still damp or the growth is inside it. Removal plus a fix for the moisture is what lasts.
Mold inside a wall after a leak
Stains or bubbling paint on a kitchen wall can mean moisture and growth inside. We cut it open under containment and clean the framing.
From cleanup to rebuild
- Inspection and moisture readingsWe look at the visible growth, check surrounding materials with a meter and find the moisture source.
- Fixing the moisture sourceEPA advises fixing the water problem first; otherwise the mold returns.
- ContainmentWe isolate the affected area so spores and dust stay inside it.
- HEPA air filtrationWe filter the air in the work area with HEPA equipment while materials are removed.
- Cleaning what staysSolid materials that remain are cleaned of growth and debris.
- DryingWe confirm the materials are dry so growth doesn't restart.
- Final cleaningThe containment area is HEPA-vacuumed and wiped down before the plastic comes down.
How we dry, clean and rebuild
HEPA air scrubbersAir filtration machines that capture fine particles during removal.
Mold-resistant materialsMoisture-resistant drywall or plywood cabinet bottoms where it makes sense.
Moisture metersTools to find wet materials and confirm they are dry before closing up.
Containment sheetingPlastic barriers, zip doors and tape that isolate the work area.
Replacement panels and drywallNew cabinet bottoms, backs, drywall and insulation for what was removed.
Kitchen Mold Remediation before and after — Carol Stream homes
Problem
Fixed
DetailBefore and after: a 1980s two-story in Carol Stream
This one is a 1980s two-story in Carol Stream. Before: white double sink and white thermofoil cabinets peeling at the edges, oak trim. The reason for the call: black spots on the back of the sink base. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included fixing the moisture source, cleaning what stays, plus drying.
Before
AfterGlendale Heights kitchen, 1990s two-story colonial: kitchen mold remediation
The site: a 1990s two-story colonial in Glendale Heights. The kitchen as it was: solid-surface integrated sink and golden-oak cabinets with oak soffits above. The main complaint was a musty smell that wouldn't go away. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included inspection and moisture readings, containment, plus HEPA air filtration.
Kitchen Mold Remediation in Glendale Heights →
Before
AfterBefore and after: a 1980s two-story in Bartlett
The site: a 1980s two-story in Bartlett. What we started with: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. What bothered the owners most: a musty smell that wouldn't go away. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant inspection and moisture readings, cleaning what stays, plus drying.
Kitchen Mold Remediation in Bartlett →
Before
AfterBefore and after: a two-story colonial from the 1990s in Carol Stream
Finished: cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Carol Stream →
Before
AfterA Carol Stream 1990s two-story colonial: before and after
What changed: the same doors sprayed in creamy white uppers and navy lowers, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Carol Stream →What happens after you call
- InspectWe look at the mold, find the moisture source and measure how far it reaches.
- Fix the moistureThe source gets fixed first so the work lasts.
- Contain and removeContainment goes up, then moldy materials are removed and surfaces cleaned.
- Dry and rebuildWe confirm dryness, clean up and restore the cabinet, wall or floor.
Kitchen Mold Remediation questions from Carol Stream homeowners
How long does kitchen mold remediation take?
Small areas under a sink are often done in a day or two plus drying. Larger areas with wall or floor removal take longer.
Do you need a license for mold remediation in Illinois?
No state license exists for it here. What matters is the method: source fixed, containment, HEPA filtration and removal of affected materials.
Will bleach kill mold under my sink?
On particleboard or drywall, bleach doesn't solve it. The affected material needs to come out and the leak needs fixing.
Do I need mold testing before remediation?
Not always. When mold is visible and the cause is clear, EPA guidance says sampling usually isn't necessary. If you want testing, before or after, we recommend an independent inspector.
Can I clean small mold spots myself?
EPA guidance says many small areas can be handled by a homeowner, and larger areas, roughly over 10 square feet, are better left to professionals. Either way, fix the moisture.
Carol Stream building permit for kitchen mold remediation: where do I apply?
Permits go through Community Development Department, Building Permits & Inspections, phone (630) 871-6230. When your scope needs one, we prepare the application and schedule the inspections.
Do Carol Stream condo associations need to approve kitchen mold remediation?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do I need a permit for kitchen mold remediation in Carol Stream?
It depends on the scope. Carol Stream's rule in short: Permit required for most remodeling; exempt only if no structural change and no alteration or relocation of plumbing, heating or electrical; fixture swaps without piping changes are exempt. We handle the permit when one is needed with Community Development Department, Building Permits & Inspections.
Do you work in my part of Carol Stream?
Yes. Our crews work across Carol Stream — ZIP 60188 — and nearby Glendale Heights, Winfield, Bloomingdale.
Working in Carol Stream
- A lot of Carol Stream kitchens date from the 1980s. We know these layouts well and what is worth keeping.
- Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
- We know how Community Development Department, Building Permits & Inspections handles kitchen permits and pull them for you.
ZIP 60188
Kitchen Mold Remediation nearby
Other kitchen services in Carol Stream
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.