Original 1950s cabinets with fixed shelves
Cabinets from the 1950s usually have one fixed shelf halfway up. Removing it and adding two roll-outs makes the space usable.
Serving Park Ridge & nearby Des Plaines, Glenview
Pull-Out Shelves & Cabinet Organizers in Park Ridge, IL
We fit roll-out shelves, trash pull-outs and corner organizers into the cabinets already in your Park Ridge kitchen.
- Serving Park Ridge ZIP 60068
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Cabinet problems pull-outs fix in Park Ridge
Getting on your knees to find a lid is a cabinet problem, not an organizing one. We retrofit sliding shelves and organizers into existing kitchen cabinets around Park Ridge, sized cabinet by cabinet instead of bought off a shelf.
Trash can in the walkway
A pull-out double bin fits inside a standard base cabinet and keeps trash and recycling out of sight next to the sink.
Pantry cabinet with deep fixed shelves
Tall pantry cabinets with fixed shelves bury cans at the back. Roll-out drawers inside the doors make every row visible.
Messy cabinet under the sink
Cleaning bottles crowded around the trap are hard to reach. Under-sink pull-outs are built around the pipes, not on top of them.
Cramped upper cabinets
If the top shelf of the wall cabinets is out of reach, a pull-down mechanism or reorganized inserts can help.
Kneeling to reach the back of the cabinet
If you have to get on the floor and reach past the front row, the cabinet needs shelves that roll out to you.
Lazy Susan that sticks or wobbles
A worn corner lazy Susan can often be rebuilt or replaced with a new one on a fresh center post and bearings.
Doors and hinges in the way
Two-door cabinets with a center stile need a different setup than single-door ones. We plan the pull-outs around that.
What the install includes
- Measuring the clear openingsWidth between hinges, depth to the back and height to the next shelf, for every cabinet.
- Removing fixed shelvesWe take out shelves that are in the way and patch any holes left behind.
- Mounting slidesSlides are fastened to the cabinet sides, using spacers where the face frame sticks out.
- Installing roll-out shelvesRoll-outs set at the heights you need for pots, small appliances or pantry goods.
- Trash, corner and under-sink unitsSpecialty pull-outs for bins, blind corners and the cabinet under the sink.
- Dividers and insertsVertical dividers and small inserts for sheet pans, lids and spices.
- Adjustment and walkthroughWe test each shelf fully loaded, adjust as needed and clean up.
Options to choose from
Specialty hardwareHardware for the awkward cabinets: blind corners, sink bases and narrow fillers.
Custom-made vs. kit organizersCustom units fit the exact opening; kits come in set sizes that may leave gaps or hit hinges.
Full-extension slidesSlides that extend fully, with soft-close available on most units.
Plywood or melamine roll-outsA practical choice for pantry shelves and lighter loads.
Wire and chrome pull-outsGood under the sink and in corners, where a light frame clears pipes and hinges.
Kitchens like yours in Park Ridge: before and after
Before
Installed
DetailA Park Ridge 1990s two-story colonial: before and after
A 1990s two-story colonial in Park Ridge, a typical kitchen for Park Ridge. What we started with: golden-oak cabinets with oak soffits above. The main complaint was solid cabinets with fixed shelves nobody could reach into. Finished kitchen: two wooden roll-out shelves in the deep base cabinet, pots and pans in neat rows that slide out to the front. The job covered mounting slides, trash, corner and under-sink units, plus adjustment and walkthrough.
Before
AfterPull-Out Shelves & Cabinet Organizers in a 1990s two-story colonial, Des Plaines
The site: a 1990s two-story colonial in Des Plaines. What we started with: honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The reason for the call: kneeling on the floor to dig out a pan. The result: two wooden roll-out shelves in the deep base cabinet, pots and pans in neat rows that slide out to the front. The job covered removing fixed shelves, installing roll-out shelves, plus adjustment and walkthrough.
Pull-Out Shelves & Cabinet Organizers in Des Plaines →
Before
AfterBefore and after: a 1980s two-story in Glenview
A 1980s two-story in Glenview, a typical kitchen for Glenview. The kitchen as it was: white thermofoil cabinets peeling at the edges, oak trim. The main complaint was deep base cabinets where pots got lost at the back. After: two wooden roll-out shelves in the deep base cabinet, pots and pans in neat rows that slide out to the front. The job covered measuring the clear openings, mounting slides, plus adjustment and walkthrough.
Pull-Out Shelves & Cabinet Organizers in Glenview →
Before
AfterPantry Design & Installation in a postwar bi-level, Park Ridge
Finished: the closet next to the kitchen rebuilt as a pantry with solid wood shelves, pull-out baskets on the bottom and a light.
Pantry Design & Installation in Park Ridge →
Before
AfterPark Ridge kitchen, 1950s ranch: built-in breakfast nook & banquette
What changed: a built-in banquette bench with storage drawers and cushions under the window, with a round pedestal table.
Built-In Breakfast Nook & Banquette in Park Ridge →How the install goes
- Send photos of the cabinetsPictures of the worst cabinets and the corner help us plan the visit.
- Measure and planA visit to measure and decide shelf heights, materials and specialty units.
- Written estimateYou get an itemized estimate per cabinet and can start with the ones that bother you most.
- Install dayWe install, adjust and leave the cabinets ready to load.
Pull-Out Shelves & Cabinet Organizers questions from Park Ridge homeowners
Can pull-outs go in upper cabinets?
Sometimes. Pull-down shelves and shallow inserts can work in uppers; full roll-outs are more common in base and pantry cabinets.
How much do pull-out shelves cost to install?
It depends on how many units, their size, material and slide type. You get a written, itemized estimate after we measure.
Do pull-outs fit older cabinets?
Most older cabinets take roll-outs well. Swollen or damaged boxes are the exception, and we'd tell you.
How much weight can a pull-out shelf hold?
It depends on the slides. For cookware and small appliances we use heavier-rated slides and sturdy shelf bottoms.
Do roll-outs lose cabinet space?
A little width goes to the slides and hinge clearance, but you gain far more by being able to use the whole depth.
Park Ridge contractor registration: do kitchen contractors need it?
Building contractors must register with the City each calendar year ($50 per firm). We take care of that before work starts.
Do I need a permit for pull-out shelf installation in Park Ridge?
It depends on the scope. Park Ridge's rule in short: Park Ridge publishes permit guidelines by project type; contact the Permit Technicians to confirm whether a kitchen project needs a permit. We handle the permit when one is needed.
Do you work in my part of Park Ridge?
Yes. Our crews work across Park Ridge — ZIP 60068 — and nearby Des Plaines, Glenview, Skokie.
Working in Park Ridge
- A lot of Park Ridge kitchens date from the 1950s. We know these layouts well and what is worth keeping.
- Most Park Ridge homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Park Ridge building department handles kitchen permits and pull them for you.
ZIP 60068
Pull-Out Shelves & Cabinet Organizers nearby
Other kitchen services in Park Ridge
Pantry Design & InstallationPantry cabinets, closet conversions and walk-in shelving, built to fit.
Built-In Breakfast Nook & BanquetteBuilt-in bench seating with storage for corners, bays and nooks.
Kitchen Island & Peninsula InstallationNew islands and peninsulas with seating and storage.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.