Serving Palatine & nearby Arlington Heights, Buffalo Grove

Kitchen Mold Remediation in Palatine, IL

Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Palatine kitchens.

  • Serving Palatine ZIP 60067, 60074
  • Containment so the damage doesn't spread
  • One team from cleanup to rebuild

Prefer a callback?

Leave your number and a Palatine mold remediation technician will call you.

Kitchen mold problems we take care of in Palatine

Kitchen mold usually sits where you don't look: the back panel of the sink base, the wall behind the dishwasher, the subfloor under the fridge. We open those spots in Palatine homes, remove the mold the way industry guidance describes and rebuild the cabinet or wall.

Mold from a neighbor's leak

In Palatine condo buildings, water from the unit above or a shared wall can cause mold in your kitchen. We document the source and remediate your side.

Mold that keeps coming back

Recurring mold is a moisture problem first. Once that's solved, we remove the affected material for good.

Musty smell with no mold in sight

Odor is often the first sign. We find the wet area and open it only where needed.

A large area of mold

Bigger areas need sealed containment, negative air and more careful removal. We explain the plan before we start.

Mold behind the refrigerator

A leaking ice maker line or condensation from the fridge can grow mold on the wall and floor behind it. We pull it out, fix the line and remove what is affected.

Condensation and window mold

Cooking steam without a working range hood can condense on cold windows and exterior walls, leading to growth on sills and drywall. We remove it and talk through ventilation.

Mold inside a wall after a leak

When a pipe in the kitchen wall has leaked, mold may be on the back of the drywall and the studs. We contain the area, open the wall and remove the affected material.

Mold under the kitchen sink

Black or green spots on the cabinet floor or back panel under the sink mean moisture has been there a while. We fix the leak, remove the damaged panel and clean the cavity behind it.

What we handle after the damage

  • Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
  • Fixing the moisture sourceEPA advises fixing the water problem first; otherwise the mold returns.
  • ContainmentThe work area is sealed with plastic sheeting, and the rest of the kitchen and house is protected.
  • HEPA air filtrationWe filter the air in the work area with HEPA equipment while materials are removed.
  • DryingThe area is dried and checked with meters before anything is closed up.
  • Final cleaningThe containment area is HEPA-vacuumed and wiped down before the plastic comes down.
  • RebuildWe restore the cabinet, wall or floor that was removed.

How we dry, clean and rebuild

Moisture metersReadings that show where moisture is and when drying is done.
Containment sheetingPlastic barriers, zip doors and tape that isolate the work area.
Replacement panels and drywallNew cabinet bottoms, backs, drywall and insulation for what was removed.
HEPA vacuumsVacuums with HEPA filters used to clean surfaces and debris.
HEPA air scrubbersFiltered air movement that keeps the work area under control.

What the work looks like in Palatine homes

Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — problemProblem
Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — fixedFixed
Kitchen Mold Remediation in a 1980s-1990s two-story colonial / tract house — detailDetail

A Palatine 1980s two-story: before and after

A 1980s two-story in Palatine, a typical kitchen for Palatine. The kitchen as it was: solid-surface integrated sink and golden-oak cabinets with oak soffits above. The reason for the call: a musty smell that wouldn't go away. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant fixing the moisture source, containment, plus final cleaning.

Kitchen Mold Remediation project in Arlington Heights, beforeBefore
Kitchen Mold Remediation project in Arlington Heights, afterAfter

Arlington Heights kitchen, 1990s two-story colonial: kitchen mold remediation

The site: a 1990s two-story colonial in Arlington Heights. The kitchen as it was: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. The reason for the call: a musty smell that wouldn't go away. After: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered inspection and moisture readings, final cleaning, plus rebuild.

Kitchen Mold Remediation in Arlington Heights →
Kitchen Mold Remediation project in Buffalo Grove, beforeBefore
Kitchen Mold Remediation project in Buffalo Grove, afterAfter

Buffalo Grove kitchen, two-story colonial from the 1990s: kitchen mold remediation

The site: a two-story colonial from the 1990s near Didier Farms. What we started with: white double sink and white thermofoil cabinets peeling at the edges, oak trim. The reason for the call: a swollen, spotted cabinet floor under the sink. Finished kitchen: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included fixing the moisture source, drying, plus final cleaning.

Kitchen Mold Remediation in Buffalo Grove →
Kitchen Remodeling project near Palatine, beforeBefore
Kitchen Remodeling project near Palatine, afterAfter

A Palatine two-story colonial from the 1990s: before and after

Cabinets in white uppers and deep green lowers with polished nickel pulls, dark soapstone-look quartz counters, a white herringbone tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.

Kitchen Remodeling in Palatine →
Kitchen Cabinet Painting project near Palatine, beforeBefore
Kitchen Cabinet Painting project near Palatine, afterAfter

A Palatine two-story colonial from the 1990s: before and after

Finished: the same doors sprayed in deep navy, new brushed nickel bar pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Palatine →

Step by step after damage

  1. InspectA visit to assess the growth, the moisture and the plan.
  2. Fix the moistureThe leak or condensation is repaired before removal begins.
  3. Contain and removeThe area is sealed, HEPA filtration runs and affected materials come out.
  4. Dry and rebuildOnce dry and clean, the kitchen is put back together.

Kitchen Mold Remediation questions from Palatine homeowners

How long does kitchen mold remediation take?
A contained sink-base job is short; a wall cavity takes longer. We give you a schedule after the inspection.
What's the difference between mold removal and mold remediation?
Remediation is the full process: source, containment, removal, cleaning and drying. Simply cleaning the surface is removal.
Will bleach kill mold under my sink?
On particleboard or drywall, bleach doesn't solve it. The affected material needs to come out and the leak needs fixing.
Do I need mold testing before remediation?
Testing is a choice, not a requirement in most kitchen cases. When owners want it, we suggest a separate, independent company so the results stand on their own.
Do you need a license for mold remediation in Illinois?
There's no state mold license in Illinois. Ask any contractor how they contain, filter and remove, and we'll walk you through ours.
Can you do kitchen mold remediation in a Palatine condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
What is the Palatine building department phone number?
Permits go through Community Development Department - Building Permits & Inspections, phone (847) 359-9042. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen mold remediation in Palatine?
It depends on the scope. Palatine's rule in short: A permit is required to remodel a kitchen or to add/alter the electrical system. We handle the permit when one is needed with Community Development Department - Building Permits & Inspections.
Do you work in my part of Palatine?
Yes. Our crews work across Palatine — ZIP 60067, 60074 — and nearby Arlington Heights, Buffalo Grove, Lake Zurich.

Working in Palatine

  • A lot of Palatine kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • We know how Community Development Department - Building Permits & Inspections handles kitchen permits and pull them for you.

ZIP 60067ZIP 60074

Kitchen Mold Remediation nearby

Planning a kitchen project in Palatine?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback