Original laminate from the 1970s
Laminate from the 1970s with a built-in backsplash is quick to remove and the most common counter we replace.
Serving Bloomingdale & nearby Roselle, Glendale Heights
Countertop Installation in Bloomingdale, IL
New countertops in Bloomingdale: talk to a fabricator about slabs, templating and install dates.
- Crews working in Bloomingdale ZIP 60108
- Most jobs done in days, with your kitchen still usable
- Samples and a written quote before we start
Countertop problems we fix in Bloomingdale
New countertops change a Bloomingdale kitchen in a day once the slab is cut. We help you choose the material, template the cabinets on site, fabricate the tops with your sink and cooktop cut-outs and install them with tight seams.
Speckled builder granite
Swapping dated granite for quartz or quartzite modernizes the kitchen and keeps the existing cabinets.
Undermount sink coming loose
A loose undermount sink is a leak waiting to happen. New counters come with the sink properly mounted and sealed.
Seams that show or separate
Visible seams come from bad layout or templating. We plan seam locations and use color-matched epoxy.
Stained or burned laminate
Laminate with burn rings, swollen seams by the sink and peeling edges can't be repaired well. Stone or quartz replaces it for good.
Cracked or chipped stone
A small chip can be filled; a crack through the slab or around the sink usually means replacement.
Not enough counter space
We extend counters, enlarge the island or add a peninsula, with brackets under any large overhang.
Tile counters with dirty grout
Grout that stays dark no matter how you scrub is the top reason people replace tile counters. One solid slab ends it.
What we do on the job
- Material selectionHelp choosing quartz, granite, quartzite or wood, and picking your slab at the yard.
- Cabinet check and levelingBase cabinets are checked for level and support before the template.
- FabricationSlabs cut to template with your chosen edge and all cut-outs done in the shop.
- Installation and seamsCounters installed and leveled, seams leveled and filled to match.
- Undermount sink mountingUndermount sink attached and sealed, ready for faucet and drain hookup.
- Backsplash optionsShort stone splash, full slab or a tile backsplash afterward.
- Bathroom vanity topsMatching stone for bathroom vanities.
Finishes we offer
LaminateBudget-friendly tops in stone and wood looks.
Edge profilesMost kitchens get an eased edge; a mitered edge makes thick-looking islands.
QuartziteNatural stone that looks like marble with better durability; needs sealing.
Porcelain slabsThin, very hard and heat-proof surfaces with marble or concrete looks.
Butcher blockWarm wood surface, often for islands. Oil it regularly; sand out scratches.
Kitchens like yours in Bloomingdale: before and after
Before
In progress
After
DetailA Bloomingdale 1980s two-story: before and after
A 1980s two-story near Old Town Bloomingdale, a typical kitchen for Bloomingdale. The kitchen as it was: almond laminate with a backsplash lip and white cast-iron double sink. The main complaint was worn laminate counters. The result: dark soapstone-look quartz countertops with a tight seam, an undermount sink and a new faucet. Work included fabrication, installation and seams, plus undermount sink mounting.
Before
AfterCountertop Installation in a raised ranch, Roselle
A raised ranch in Roselle, a typical kitchen for Roselle. What we started with: harvest-gold laminate and stainless double sink. What bothered the owners most: worn laminate counters. The result: bright white quartz countertops with a tight seam, an undermount sink and a new faucet. Work included material selection, fabrication, plus installation and seams.
Countertop Installation in Roselle →
Before
AfterGlendale Heights kitchen, 1980s two-story: countertop installation
The site: a 1980s two-story in Glendale Heights. Before: white Corian-style solid surface with a yellowed seam and solid-surface integrated sink. What bothered the owners most: counters that looked dated. The result: warm walnut butcher block countertops with a tight seam, an undermount sink and a new faucet. Work included cabinet check and leveling, fabrication, plus bathroom vanity tops.
Countertop Installation in Glendale Heights →
Before
AfterA Bloomingdale two-story colonial from the 1990s: before and after
Finished: a white 2x8 tile in a vertical stack backsplash with clean edges and outlets set flush.
Kitchen Backsplash Installation in Bloomingdale →
Before
AfterKitchen Remodeling in a 1990s two-story colonial, Bloomingdale
Finished: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in Bloomingdale →Day by day
- Choose your materialPick a color and finish; for natural stone, choose your exact slab.
- TemplateA precise template of your cabinets, walls, sink and cooktop.
- FabricationYour tops are cut to template, with the chosen edge and cut-outs.
- InstallationInstallation day: tear-out, set, seam, mount the sink and clean up.
- HookupFaucet, drain and disposal are reconnected once the sealant cures.
Countertop Installation questions from Bloomingdale homeowners
What does countertop installation include?
Everything from template to the final wipe-down: tear-out, fabrication, install, seams and sink mounting.
Do you install backsplashes too?
Yes — a stone splash cut from the same slab, or tile installed after the counters are in.
Do you install laminate and solid surface too?
Yes. Modern laminate can look like stone or wood, and solid surface gives seamless, repairable tops.
Can I put hot pans or a toaster on quartz?
A toaster is fine. Hot pans straight from the stove should go on a trivet — high heat can mark the resin in quartz.
How long from template to installation?
Usually one to two weeks, depending on the material. You get the installation date at the template visit.
Do I need a Bloomingdale-registered contractor for countertop installation?
No registration application or fee to work as a contractor in Bloomingdale. Permit submittals need a detailed written scope of work. We take care of that before work starts.
Does countertop installation need a Bloomingdale building permit, and who files it?
Permits go through Building & Zoning Department, phone (630) 671-5660. When your scope needs one, we prepare the application and schedule the inspections.
Can Bloomingdale bulk pickup take my old appliance or cabinets?
Hauler SBC Waste Solutions: bulk items (up to 2 cubic yards, e.g. furniture) and white goods (appliances) covered under flat rate. If you'd rather not deal with it, we haul old units and debris away.
Do you work in my part of Bloomingdale?
Yes. Our crews work across Bloomingdale, including Old Town Bloomingdale — ZIP 60108 — and nearby Roselle, Glendale Heights, Carol Stream.
Working in Bloomingdale
- A lot of Bloomingdale kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Bloomingdale homes are single-family. We protect floors and driveways and leave the site clean every day.
Old Town Bloomingdale
ZIP 60108
Countertop Installation nearby
More for Bloomingdale homeowners
- All kitchen services in BloomingdaleRemodels, cabinets, counters, plumbing, appliances and repairs
- Countertop Fabrication & Installation across ChicagolandEvery town we cover for this service
-
Countertops, tile and floorsQuartz vs Granite Countertops: Durability, Care, Heat, Looks and Why Quartz Is in DeclineIn the quartz vs granite countertops choice, granite is natural stone that handles heat well and has one-of-a-kind patterns but needs periodic…3 min read
-
Costs and budgetingCountertop Replacement Cost: What Kitchen Countertops Cost to Replace and InstallKitchen countertop replacement cost usually runs about $50 to $150 per square foot installed, or roughly $1,500 to $6,000 for an average kitchen with…3 min read
-
CabinetsHome Depot Cabinet Refacing and Quartz Countertop Installation: What to Know Before You ChooseHow much does Home Depot charge to reface cabinets or install quartz countertops? There is no fixed number; the price comes from a written quote…3 min read
-
CabinetsKitchen Product and Installation Options: Which Company Is Best for Quartz, and Costco Cabinet RefacingThere is no single best quartz company: the major brands make similar engineered stone, so choose by color, slab size, warranty and a good local…3 min read
Other kitchen services in Bloomingdale
Countertop RepairChips, cracks, seams and burns fixed without replacing the top.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.