Serving Bloomingdale & nearby Roselle, Glendale Heights

Kitchen Sink Installation & Replacement in Bloomingdale, IL

Undermount, drop-in and farmhouse sinks set, sealed and connected by licensed plumbers in Bloomingdale.

  • Installers working in Bloomingdale ZIP 60108
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Bloomingdale licensed plumber will call you.

Kitchen sink problems we fix in Bloomingdale

A new kitchen sink is part fit, part plumbing. In Bloomingdale we check the counter cutout and the cabinet below, mount the bowl so it stays put, and our licensed plumbers reconnect the drain, disposal, dishwasher and faucet.

1970s stainless double sink

If your sink dates from the 1970s, the drain parts usually do too. We replace both at once.

Sink that drains slowly after replacement

Slow draining right after an install points to the connection, not the bowl. We correct the pitch and the fittings.

Double bowl too small for big pans

Many owners trade a divided sink for one wide basin. We reconfigure the drain for the single outlet and reconnect the disposal.

Wanting a farmhouse sink

Farmhouse sinks are heavy, especially fireclay and cast iron. We frame a support inside the cabinet, trim the face and set the sink level with the counters.

Faucet holes don't match the new faucet

We plan the faucet, sprayer, soap dispenser and any filtered-water tap together, so the holes and the sink line up.

Undermount sink pulling away from the counter

If the sink has dropped and water runs into the cabinet, it can usually be reattached without replacing the counter. We support it from below and bond it again.

Strainer or drain leaking

Drips below the drain opening come from a worn basket strainer seal. New strainers bedded in putty or a gasket are part of every sink we set.

Drop-in rim that traps grime

The lip of a top-mount sink collects crumbs and leaves a dirty caulk line. With stone counters, switching to undermount lets you wipe straight into the bowl.

What we hook up and check

  • Measure the cutout and cabinetWe measure the counter opening, the sink base and the drain position before you pick a sink.
  • Prepare the openingCutout cleaned of old caulk and adhesive; enlarged or polished when needed.
  • Cabinet changes for farmhouse sinksCabinet front modified and the sink supported from below.
  • Set and seal the sinkUndermount sinks clipped and bonded; drop-ins bedded in sealant and clamped.
  • New strainers and drainNew basket strainers, tailpieces and P-trap assembled to the drain line.
  • Faucet and accessoriesFaucet, sprayer, soap dispenser or deck plate installed.
  • Disposal and dishwasher hookupAppliance connections restored with a high loop or air gap as code requires.

Models, parts and fittings

Stainless steelThe most common kitchen sink: durable, light and quiet when it has sound padding.
Farmhouse (apron-front)A deep bowl with an exposed front that needs a modified or dedicated sink base.
FireclayGlazed ceramic fired at high heat, common for farmhouse sinks; heavy and glossy.
UndermountMounted below a stone or solid-surface counter so you wipe crumbs straight in.
Granite compositeA dense, matte sink made of stone particles and resin that hides water spots.

Kitchen Sink Installation & Replacement before and after — Bloomingdale homes

Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Sink Installation & Replacement in a 1980s-1990s two-story colonial / tract house — detailDetail

Kitchen Sink Installation & Replacement in a two-story colonial from the 1990s, Bloomingdale

The site: a two-story colonial from the 1990s in Bloomingdale. The kitchen as it was: solid-surface integrated sink. The reason for the call: a stained solid-surface bowl. Finished kitchen: a new undermount stainless single-bowl sink with a pull-down faucet. Work included prepare the opening, cabinet changes for farmhouse sinks, plus disposal and dishwasher hookup.

Kitchen Sink Installation & Replacement project in Roselle, beforeBefore
Kitchen Sink Installation & Replacement project in Roselle, afterAfter

A Roselle 1990s two-story colonial: before and after

This one is a 1990s two-story colonial in Roselle. The kitchen as it was: white double sink. What bothered the owners most: a divided sink too narrow for sheet pans. After: a new undermount stainless single-bowl sink with a pull-down faucet. Work included measure the cutout and cabinet, cabinet changes for farmhouse sinks, plus disposal and dishwasher hookup.

Kitchen Sink Installation & Replacement in Roselle →
Kitchen Sink Installation & Replacement project in Hanover Park, beforeBefore
Kitchen Sink Installation & Replacement project in Hanover Park, afterAfter

A Hanover Park two-story colonial from the 1990s: before and after

This one is a two-story colonial from the 1990s near Ontarioville. Before: white cast-iron double sink. The reason for the call: a chipped porcelain sink with stains that wouldn't scrub out. Finished kitchen: a new undermount stainless single-bowl sink with a pull-down faucet. The job covered cabinet changes for farmhouse sinks, faucet and accessories, plus disposal and dishwasher hookup.

Kitchen Sink Installation & Replacement in Hanover Park →
Kitchen Remodeling project near Bloomingdale, beforeBefore
Kitchen Remodeling project near Bloomingdale, afterAfter

Before and after: a two-story colonial from the 1990s in Bloomingdale

Finished: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.

Kitchen Remodeling in Bloomingdale →
Kitchen Cabinet Painting project near Bloomingdale, beforeBefore
Kitchen Cabinet Painting project near Bloomingdale, afterAfter

A Bloomingdale 1980s two-story: before and after

Finished: the same doors sprayed in creamy white uppers and navy lowers, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Bloomingdale →

From the old unit to the new one

  1. Pick the sinkSend the model you like or let us suggest a few that fit.
  2. Measure and planWe check the cutout, the cabinet and the drain, and plan any cabinet changes.
  3. Written estimateA clear quote listing the sink work, parts and any cabinet modifications.
  4. Install and connectThe old sink comes out, the new one is set and a licensed plumber makes the connections.
  5. Cure and testAdhesive and sealant cure, then we run water and check every joint.

Kitchen Sink Installation & Replacement questions from Bloomingdale homeowners

Will Lake Michigan water mark my new sink?
Treated lake water still carries some minerals, so water spots show on dark composite and stainless. Wiping the bowl dry keeps it looking new.
Can a fallen undermount sink be reattached?
In most cases. As long as the stone around the cutout isn't cracked, the sink can be remounted.
What does a farmhouse sink need?
A cabinet built or modified for the apron, solid support under the bowl and usually a new countertop cutout.
Who would you call to install a new sink?
Call someone who does the whole job: removing the old sink, setting the new one and connecting the plumbing.
Undermount or drop-in: which is better?
It depends on the counter. Stone and quartz suit undermount; laminate usually calls for a drop-in.
Does Bloomingdale have lead service lines?
Village has a service line material inventory (available from Public Works, 630-671-5800). A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
What is the Bloomingdale building department phone number?
Permits go through Building & Zoning Department, phone (630) 671-5660. When your scope needs one, we prepare the application and schedule the inspections.
Bloomingdale plumbing code: who can do the plumbing for sink replacement?
Plumbing license required depending on permit type, and a Letter of Intent is required for all plumbing work. Our plumbing connections are made by licensed plumbers.
Bloomingdale water: how does it affect sink replacement?
Bloomingdale's water source: Purchased from DuPage Water Commission; Lake Michigan water supplied via City of Chicago. We plan fittings and filters around it.
Do I need a Bloomingdale-registered contractor for sink replacement?
No registration application or fee to work as a contractor in Bloomingdale. Permit submittals need a detailed written scope of work. We take care of that before work starts.
Do you work in my part of Bloomingdale?
Yes. Our crews work across Bloomingdale, including Old Town Bloomingdale — ZIP 60108 — and nearby Roselle, Glendale Heights, Carol Stream.

Working in Bloomingdale

  • A lot of Bloomingdale kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Bloomingdale homes are single-family. We protect floors and driveways and leave the site clean every day.

Old Town Bloomingdale

ZIP 60108

Kitchen Sink Installation & Replacement nearby

Planning a kitchen project in Bloomingdale?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback