Serving Bloomingdale & nearby Roselle, Glendale Heights

Kitchen Appliance Removal in Bloomingdale, IL

Old fridge, range, dishwasher or wall oven? We disconnect it safely, carry it out of your Bloomingdale home and get it recycled.

  • Serving Bloomingdale ZIP 60108
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Bloomingdale appliance removal crew will call you.

Appliance removal jobs we handle in Bloomingdale

A dead fridge in the garage or a stove that's being replaced doesn't have to sit around for weeks. We shut off and cap the connections, carry the unit out without scuffing walls or floors and haul it off from your Bloomingdale home.

Dishwasher removal without a flood

We shut the water valve, disconnect the supply and drain lines and cap them, then slide the dishwasher out over a protected floor.

Appliance that still works and could be donated

A replacement isn't always about a broken appliance. When yours still runs, donation is an option we offer.

Gas range that needs disconnecting

We close the valve behind the range, take off the flex line and seal the outlet so nothing is left open when the unit is gone.

Clearing the kitchen before a remodel

Before demolition, we take out the range, fridge, dishwasher, microwave and hood in one visit so the crew can start on clean walls.

Hardwired wall oven or cooktop removal

A wall oven comes out of its cabinet with the power off at the panel and the conductors capped inside a covered box, ready for the next appliance.

Doorways and stairs too tight for the appliance

Big fridges often won't clear a doorway without taking the doors or handles off. We remove them, move the unit and pad every corner.

Second fridge or freezer in the garage or basement

Spare fridges and freezers are usually in the hardest spots to reach. We handle the stairs and the tight corners.

Protecting floors and walls on the way out

Dragging an appliance across the floor is how most damage happens. We lift, roll and protect the route instead.

What the install includes

  • Walkthrough and route checkWe look at each appliance, its connections and the path out of the house.
  • Floor and doorway protectionRunners down, corners and frames padded before anything moves.
  • Water and drain disconnectDishwasher and ice-maker lines closed and sealed.
  • Electrical made safePower is cut and any exposed wiring left safely closed up.
  • Doors, handles and trim removed when neededWe take off what's needed to get through the doorway.
  • Carry-outUnits strapped to an appliance dolly and moved out on the planned route.
  • CleanupWe sweep up where the old units stood.

Options to choose from

Dishwashers and compactorsBuilt-in dishwashers and trash compactors under the counter.
Microwaves and range hoodsOver-the-range, built-in and countertop microwaves, plus old hoods.
Disconnect partsThe fittings that leave the hookups safely closed after removal.
Refrigerators and freezersAny fridge or freezer, including the spare in the garage.
Ranges, ovens and cooktopsGas and electric ranges, wall ovens and drop-in cooktops.

What the work looks like in Bloomingdale homes

Kitchen Appliance Removal in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Appliance Removal in a 1980s-1990s two-story colonial / tract house — afterAfter

Bloomingdale kitchen, 1990s two-story colonial: kitchen appliance removal

The site: a 1990s two-story colonial near Old Town Bloomingdale. The kitchen as it was: almond appliances. What bothered the owners most: a set of worn-out appliances from another era. The result: the empty, swept appliance spaces ready for the new appliances. The job covered floor and doorway protection, doors, handles and trim removed when needed, plus carry-out.

Kitchen Appliance Removal project in Roselle, beforeBefore
Kitchen Appliance Removal project in Roselle, afterAfter

Kitchen Appliance Removal in a 1990s two-story colonial, Roselle

This one is a 1990s two-story colonial in Roselle. What we started with: white appliances. The reason for the call: old white appliances that needed to go. Finished kitchen: the empty, swept appliance spaces ready for the new appliances. Work included floor and doorway protection, electrical made safe, plus doors, handles and trim removed when needed.

Kitchen Appliance Removal in Roselle →
Kitchen Appliance Removal project in Carol Stream, beforeBefore
Kitchen Appliance Removal project in Carol Stream, afterAfter

A Carol Stream two-story colonial from the 1990s: before and after

This one is a two-story colonial from the 1990s in Carol Stream. Before: black appliances. The reason for the call: working appliances being swapped out in a remodel. After: the empty, swept appliance spaces ready for the new appliances. Work included water and drain disconnect, doors, handles and trim removed when needed, plus carry-out.

Kitchen Appliance Removal in Carol Stream →
Kitchen Remodeling project near Bloomingdale, beforeBefore
Kitchen Remodeling project near Bloomingdale, afterAfter

A Bloomingdale two-story colonial from the 1990s: before and after

What changed: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.

Kitchen Remodeling in Bloomingdale →
Kitchen Cabinet Painting project near Bloomingdale, beforeBefore
Kitchen Cabinet Painting project near Bloomingdale, afterAfter

Bloomingdale kitchen, 1980s two-story: kitchen cabinet painting

The same doors sprayed in creamy white uppers and navy lowers, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Bloomingdale →

Install day

  1. Tell us what's goingLet us know which units and how many floors or steps are involved.
  2. Written estimateAn itemized estimate covering disconnects, carry-out and recycling.
  3. Disconnect and removeWe make each hookup safe and move the units out carefully.
  4. Recycle and clean upUnits delivered to recyclers or donation and the space swept.

Kitchen Appliance Removal questions from Bloomingdale homeowners

Do I need to empty or defrost the fridge first?
Clear out the food. An early unplug helps, but we can still remove it if you couldn't.
Can I put an old refrigerator out with the garbage?
Not as normal garbage. Fridges and freezers go to facilities that recover the refrigerant first.
Do you disconnect the gas and water?
Yes. Nothing is left open or live where the appliance used to be.
Will you remove appliances before my remodel starts?
Yes. We clear every appliance, cap the utilities and leave the kitchen ready for demolition.
Is appliance removal free?
Not usually, since disconnecting, carrying and recycling all take time. We tell you the price before we start.
Can Bloomingdale bulk pickup take my old appliance or cabinets?
Hauler SBC Waste Solutions: bulk items (up to 2 cubic yards, e.g. furniture) and white goods (appliances) covered under flat rate. If you'd rather not deal with it, we haul old units and debris away.
Bloomingdale contractor registration: do kitchen contractors need it?
No registration application or fee to work as a contractor in Bloomingdale. Permit submittals need a detailed written scope of work. We take care of that before work starts.
Do you work in my part of Bloomingdale?
Yes. Our crews work across Bloomingdale, including Old Town Bloomingdale — ZIP 60108 — and nearby Roselle, Glendale Heights, Carol Stream.

Working in Bloomingdale

  • A lot of Bloomingdale kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Bloomingdale homes are single-family. We protect floors and driveways and leave the site clean every day.

Old Town Bloomingdale

ZIP 60108

Kitchen Appliance Removal nearby

Planning a kitchen project in Bloomingdale?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback