Original laminate from the 1990s
Rolled-edge laminate from the 1990s comes off in an hour; new stone and a tile backsplash go in after.
Serving Aurora & nearby Batavia, Warrenville
Countertop Installation in Aurora, IL
New countertops in Aurora: talk to a fabricator about slabs, templating and install dates.
- Serving Aurora ZIP 60506, 60502, 60505, 60504, 60503
- A new look without tearing the kitchen out
- Clean, protected work area every day
Countertop problems we fix in Aurora
Countertop replacement in Aurora starts with a template and ends with a sink that is ready to use. We handle tear-out, templating, fabrication and installation, and plan seams where you will barely see them.
Tile counters with dirty grout
Grout lines that never come clean and chipped tile edges are typical complaints. A solid slab is easier to clean and to work on.
Counters that stain easily
If spills soak in, the surface needs sealing or a change. Quartz doesn't need sealing at all.
Speckled builder granite
Swapping dated granite for quartz or quartzite modernizes the kitchen and keeps the existing cabinets.
Not enough counter space
We can extend a run, add a peninsula or enlarge the island top with an overhang for seating, supported properly underneath.
Cracked or chipped stone
We look at whether a crack is cosmetic or structural. If the slab needs replacing, we match the layout and reuse openings when we can.
Undermount sink coming loose
A sagging undermount sink pulls away from the counter and leaks. New tops come with properly mounted sink clips or support.
Stained or burned laminate
Burn marks, peeling edges and swollen seams can't be fixed on laminate. A stone or quartz top solves it for good.
What we do on the job
- Material selectionHelp choosing quartz, granite, quartzite or wood, and picking your slab at the yard.
- Cabinet check and levelingBase cabinets are checked for level and support before the template.
- Digital templatingWe template on site after the cabinets are set, including sink and cooktop positions.
- Installation and seamsCounters installed and leveled, seams leveled and filled to match.
- Undermount sink mountingUndermount sink attached and sealed, ready for faucet and drain hookup.
- Backsplash optionsShort stone splash, full slab or a tile backsplash afterward.
- Bathroom vanity topsVanity tops cut from the same slab or remnants.
Finishes we offer
Butcher blockWood tops add warmth and can be refinished; keep them oiled.
Solid surfaceA repairable, seamless option with built-in sinks.
QuartziteNatural stone that looks like marble with better durability; needs sealing.
MarbleClassic and beautiful but etches from acids like lemon and wine — best for those who like patina.
Edge profilesEased square, bevel, half bullnose or ogee — the edge changes the whole look.
Kitchens like yours in Aurora: before and after
Before
In progress
After
DetailBefore and after: a 1990s two-story colonial in Aurora
The site: a 1990s two-story colonial near Palace Street. Before: almond laminate with a backsplash lip and white cast-iron double sink. The main complaint was laminate that had seen better days. Finished kitchen: dark soapstone-look quartz countertops with a tight seam, an undermount sink and a new faucet. On site this meant installation and seams, undermount sink mounting, plus bathroom vanity tops.
Before
AfterA Batavia 1990s two-story colonial: before and after
The site: a 1990s two-story colonial in Batavia. The kitchen as it was: white Corian-style solid surface with a yellowed seam and solid-surface integrated sink. The reason for the call: counters that looked dated. Finished kitchen: black honed granite countertops with a tight seam, an undermount sink and a new faucet. On site this meant cabinet check and leveling, installation and seams, plus bathroom vanity tops.
Countertop Installation in Batavia →
Before
AfterWarrenville kitchen, 1990s two-story colonial: countertop installation
The site: a 1990s two-story colonial in Warrenville. What we started with: white ceramic tile with dark stained grout lines and white double sink. What bothered the owners most: tile counters with grout that never looked clean. Finished kitchen: charcoal concrete-look quartz countertops with a tight seam, an undermount sink and a new faucet. Work included cabinet check and leveling, digital templating, plus installation and seams.
Countertop Installation in Warrenville →
Before
AfterAurora kitchen, 1980s two-story: kitchen backsplash installation
Finished: a terracotta-look square tile backsplash with clean edges and outlets set flush.
Kitchen Backsplash Installation in Aurora →
Before
AfterAn Aurora two-story colonial from the 1990s: before and after
What changed: cabinets in white uppers and deep green lowers with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Aurora →How your countertop installation goes
- Choose your materialVisit a slab yard or look at samples at home; we help you choose.
- TemplateWe measure the installed cabinets on site with digital templating.
- FabricationSlabs are cut, edged and drilled for sink, faucet and cooktop.
- InstallationInstallation day: tear-out, set, seam, mount the sink and clean up.
- HookupPlumbing goes back on after the sink adhesive sets.
Countertop Installation questions from Aurora homeowners
What's the downside of quartz countertops?
It can scorch under hot pans and isn't rated for outdoor use; otherwise it's very low maintenance.
Can you reuse my existing sink?
Yes, if it is undamaged and works with the new counter. Drop-in sinks can be swapped for undermount.
Do my cabinets need to be replaced for stone?
Rarely. Solid cabinets carry stone; we level them and add support where needed.
Do you install laminate and solid surface too?
Yes — laminate and solid surface are good options for rentals, basements and tighter budgets.
Can I put hot pans or a toaster on quartz?
Yes to the toaster, no to a pan right off the burner. Granite handles heat better than quartz.
Can Aurora bulk pickup take my old appliance or cabinets?
Appliances (refrigerators, stoves, water heaters) must be scheduled with hauler Groot, 630-892-9294, and carry one sticker; bulk items need stickers ($2.75 each) and bundles max 2 ft x 4 ft x 50 lb. If you'd rather not deal with it, we haul old units and debris away.
Do I need a Aurora-registered contractor for countertop installation?
Contractors must be registered/licensed with the City (application, required testing if applicable, proof of insurance naming the City as additional insured). Homeowners may act as own contractor if owner-occupied 6+ months with a Homeowner Liability Waiver. We take care of that before work starts.
What kind of Aurora homes do you work in?
In Aurora we see Victorian, Prairie School, Sears catalog homes and Lustron steel houses. Each comes with its own walls, wiring and plumbing, and we plan the job around them.
Does countertop installation need a Aurora building permit, and who files it?
Permits go through Division of Building and Permits, City of Aurora, phone (630) 256-3130. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for countertop installation in Aurora?
It depends on the scope. Aurora's rule in short: Interior remodels, structural changes and interior plumbing always need a permit; electrical/mechanical may. We handle the permit when one is needed with Division of Building and Permits, City of Aurora.
Do you work in my part of Aurora?
Yes. Our crews work across Aurora, including Near Eastside, Tanner, Riddle Highlands, Palace Street — ZIP 60506, 60502, 60505, 60504, 60503 — and nearby Batavia, Warrenville, Naperville.
Working in Aurora
- A lot of Aurora kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Aurora homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Near EastsideTannerRiddle HighlandsPalace StreetWest SideFar East Side
ZIP 60506ZIP 60502ZIP 60505ZIP 60504ZIP 60503
Countertop Installation nearby
More for Aurora homeowners
- All kitchen services in AuroraRemodels, cabinets, counters, plumbing, appliances and repairs
- Countertop Fabrication & Installation across ChicagolandEvery town we cover for this service
-
Countertops, tile and floorsQuartz vs Granite Countertops: Durability, Care, Heat, Looks and Why Quartz Is in DeclineIn the quartz vs granite countertops choice, granite is natural stone that handles heat well and has one-of-a-kind patterns but needs periodic…3 min read
-
Costs and budgetingCountertop Replacement Cost: What Kitchen Countertops Cost to Replace and InstallKitchen countertop replacement cost usually runs about $50 to $150 per square foot installed, or roughly $1,500 to $6,000 for an average kitchen with…3 min read
-
CabinetsHome Depot Cabinet Refacing and Quartz Countertop Installation: What to Know Before You ChooseHow much does Home Depot charge to reface cabinets or install quartz countertops? There is no fixed number; the price comes from a written quote…3 min read
-
CabinetsKitchen Product and Installation Options: Which Company Is Best for Quartz, and Costco Cabinet RefacingThere is no single best quartz company: the major brands make similar engineered stone, so choose by color, slab size, warranty and a good local…3 min read
Other kitchen services in Aurora
Countertop RepairChips, cracks, seams and burns fixed without replacing the top.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.