Landlord requires grease maintenance records
Shared sewer lines in strip centers make grease every tenant's problem. Landlords often want proof each kitchen services its trap, and we provide it.
Serving West Chicago & nearby Winfield, Carol Stream
Grease Trap Installation & Cleaning in West Chicago, IL
Grease traps and interceptors sized, installed, cleaned and kept on schedule for restaurants and food-service kitchens in West Chicago.
- Serving restaurants and kitchens in West Chicago ZIP 60185
- Work scheduled around service hours
- Paperwork ready for inspectors
Grease trap problems we handle in West Chicago
Slow floor drains, sewer smell at the back door or a FOG notice from the village usually lead back to the grease trap. Our West Chicago crews diagnose the trap, clean or replace it and leave you with a maintenance log that holds up at inspection.
Health inspector asked about the grease trap
Inspectors want to see maintenance, not just a trap. Our service tickets and log give you the paper trail.
Sinks and floor drains backing up
When the three-compartment sink or floor drains back up during service, the trap is often full or the line past it is coated with grease. We clean the trap and clear the line.
Moving into a space with an unknown trap
Before you open in a space that used to be another restaurant, we inspect the existing trap or interceptor and its connections.
Not sure how often to clean
Busy fryer kitchens may need small traps cleaned every few weeks; larger interceptors go longer. We set the schedule from your actual buildup.
New restaurant needs a trap or interceptor
New food establishments usually need a grease trap or interceptor approved during plan review. We size it from your fixtures and flow and install it before inspection.
Staff cleaning the trap themselves
Hand-cleaning a small trap is possible; doing it consistently with proper disposal and records is where kitchens fall behind. We handle it on a schedule.
Damaged lid, baffles or rusted trap
Broken baffles, corroded walls or a cracked lid let grease pass straight through. We repair what we can and replace the trap when it's beyond that.
What the job covers
- Site visit and trap locationWe find the trap or interceptor, open it and look at size, condition and connections.
- InstallationUnder-sink traps set and plumbed, or in-ground interceptors excavated, set and connected.
- Cleaning and pump-outSmall traps cleaned on site; larger interceptors pumped by licensed waste haulers.
- Inspection of baffles and outletWe look inside the empty trap for damage that lets grease pass.
- Line jettingJetting for lines that have built up grease past the trap.
- Service log and manifestsA maintenance log and disposal records ready for inspectors and the property manager.
- Recurring scheduleA standing cleaning interval matched to your trap and cooking volume.
Systems and components
Under-sink grease trapsCompact hydromechanical traps that sit under or next to a sink and are cleaned often.
Flow control fittingsA fitting that limits flow so the trap can do its job.
In-ground grease interceptorsLarge outdoor or below-slab tanks that hold more grease and are pumped less often.
Gasketed lids and access risersLids and risers that make the trap easy to open and keep smell out of the kitchen.
Poly and coated steel trapsPlastic traps resist corrosion; steel traps are still used where size or listing calls for them.
Kitchens like yours in West Chicago: before and after
Before
AfterGrease Trap Installation & Cleaning in a cafe kitchen, West Chicago
This one is a cafe kitchen in West Chicago. What bothered the owners most: a grease trap that kept backing up the prep sinks. The result: the same interceptor pumped and the lid closed, service hose coiled on the truck. The job covered installation, inspection of baffles and outlet, plus line jetting.
Before
AfterGrease Trap Installation & Cleaning in a cafe kitchen, Carol Stream
This one is a cafe kitchen in Carol Stream. What bothered the owners most: a full interceptor and a sour smell by the back door. Finished kitchen: the same interceptor pumped and the lid closed, service hose coiled on the truck. On site this meant site visit and trap location, installation, plus inspection of baffles and outlet.
Grease Trap Installation & Cleaning in Carol Stream →
Before
AfterA West Chicago cafe kitchen: before and after
Finished: the same hood degreased to bare stainless with an inspection sticker area.
Commercial Hood Cleaning in West Chicago →
Before
AfterBefore and after: a 1990s two-story colonial in West Chicago
What changed: cabinets in soft white with brushed nickel bar pulls, black honed granite counters, a white 2x8 tile in a vertical stack backsplash, gray wood-look porcelain plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in West Chicago →
Before
AfterKitchen Cabinet Painting in a two-story colonial from the 1990s, West Chicago
The same doors sprayed in deep navy, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in West Chicago →Scheduling around service
- Call or book a visitShare what you're seeing and any letter from the village or inspector.
- Inspect the trapA look inside the trap and at the lines around it.
- Written estimateA clear written quote for the work and the recommended schedule.
- Clean, pump or installWe do the work around your hours and leave the area clean.
- Log and scheduleYou get a dated service record and the next visit on the calendar.
Grease Trap Installation & Cleaning questions from West Chicago businesses
What does grease trap service cost?
We price after seeing the trap, and the estimate is itemized and in writing.
Can a plumber clean a grease trap?
A plumber can clean small traps and fix the drains around them. Pumping large interceptors is done by licensed waste haulers with manifests.
What's the difference between a grease trap and a grease interceptor?
People use the words loosely, but in general traps are compact and indoors and interceptors are large and serviced from outside.
How is a grease trap sized?
By the fixtures that drain into it and their flow rate, plus local rules. Interceptors are also sized by meals served and kitchen volume.
What can't go down a grease trap?
Fryer oil and large amounts of grease belong in a rendering container, not the drain. Harsh chemicals and enzymes that just move grease downstream cause problems too.
West Chicago building permit for grease trap service: where do I apply?
Permits go through Community Development Department. When your scope needs one, we prepare the application and schedule the inspections.
West Chicago contractor registration: do kitchen contractors need it?
All contractors and subcontractors working in West Chicago must be registered with the City (insurance, licensing and bonding are checked). We take care of that before work starts.
Do you work in my part of West Chicago?
Yes. Our crews work across West Chicago — ZIP 60185 — and nearby Winfield, Carol Stream, St. Charles.
Working in West Chicago
- Downtime costs you covers, so West Chicago work is booked around your slow days and closing times.
- Permits, plan review and inspections go through Community Development Department and the fire department when the job needs them.
- Certificates of insurance, keys, roof access and landlord sign-off are arranged ahead of the first visit.
ZIP 60185
Grease Trap Installation & Cleaning nearby
Other kitchen services in West Chicago
Commercial Kitchen Hood InstallationType I and II hoods, grease duct, fans and makeup air, built to NFPA 96.
Commercial Hood CleaningHood, duct and roof fan degreased to bare metal, after hours.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.