Scale on the aerator from lake water
White crust on the spray face is mineral buildup. Many Tinley Park owners just need the aerator cleaned or swapped, not a new faucet.
Serving Tinley Park & nearby Orland Park, Woodridge
Kitchen Faucet Installation in Tinley Park, IL
Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Tinley Park.
- Serving Tinley Park ZIP 60477, 60487
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Kitchen faucet problems we fix in Tinley Park
We install kitchen faucets in Tinley Park: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.
Spout too short or too low
A low spout makes it hard to fill stockpots and leaves water splashing at the back. A high-arc or pull-down faucet gives more room.
Wanting a touchless faucet
Touchless faucets need power under the sink, either batteries or a plug-in adapter. We plan the control box and its power when we install.
Old two-handle faucet with a side sprayer
Many owners replace the old two-handle setup with a single lever and a pull-down spray. We cover the leftover holes with a deck plate.
Hole count doesn't match the new faucet
A single-hole faucet on a three-hole sink needs a deck plate. A widespread faucet needs three holes, which we can drill in stone counters.
Drip from the spout that won't stop
If the spout drips day and night, the seal inside the valve has worn. We repair it or put in a new faucet.
Leak under the sink at the faucet lines
If the faucet looks fine on top but the cabinet is wet, check the lines under it. Worn supply hoses and spray hoses are common culprits.
Low flow or a sputtering spout
A spout that spits or barely runs usually has debris or mineral buildup in the aerator. If cleaning doesn't help, the cartridge or supply valve may be partly blocked.
Included with the install
- Shut off and removeWater off, supply lines disconnected and the old faucet unbolted.
- Clean the deckOld putty, caulk and mineral residue cleaned from the mounting surface.
- Replace valves when neededNew shut-off valves if the old ones won't close or weep.
- Mount the faucetFaucet set with its gasket or deck plate and tightened from below.
- Pull-down hose and weightSprayer hose connected and its counterweight placed correctly.
- Supply connectionsNew braided supply lines connected and tightened without strain.
- Extra holesDeck plate, soap pump or second faucet for any leftover holes.
Options to choose from
Filtered-water and pot-filler tapsA small second faucet for filtered water, or a wall-mounted pot filler by the range.
Touchless and touch faucetsSensor or tap-to-start faucets that need batteries or an outlet under the sink.
Deck platesTrim that lets a one-hole faucet sit cleanly on a three-hole sink.
Pull-out faucetsA shorter spout with a head that pulls straight out toward you.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.
Kitchens like yours in Tinley Park: before and after
Before
Installed
DetailTinley Park kitchen, two-story colonial from the 1990s: kitchen faucet installation
This one is a two-story colonial from the 1990s in Tinley Park. What we started with: solid-surface integrated sink. What bothered the owners most: an old faucet that dripped and was crusted with scale. After: a new single-handle pull-down faucet with a clean caulk line. On site this meant pull-down hose and weight, supply connections, plus extra holes.
Before
AfterA Woodridge suburban townhome: before and after
This one is a suburban townhome near Seven Bridges. The kitchen as it was: stainless double sink. The reason for the call: a leaking two-handle faucet with a side sprayer. The result: a new single-handle pull-down faucet with a clean caulk line. On site this meant clean the deck, supply connections, plus extra holes.
Kitchen Faucet Installation in Woodridge →
Before
AfterBefore and after: a two-story colonial from the 1990s in Bolingbrook
This one is a two-story colonial from the 1990s in Bolingbrook. What we started with: white double sink. What bothered the owners most: a faucet too low to fill a stockpot. The result: a new single-handle pull-down faucet with a clean caulk line. Work included shut off and remove, pull-down hose and weight, plus supply connections.
Kitchen Faucet Installation in Bolingbrook →
Before
AfterA Tinley Park two-story colonial from the 1990s: before and after
What changed: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.
Kitchen Plumbing Relocation in Tinley Park →
Before
AfterTinley Park kitchen, two-story colonial from the 1990s: kitchen remodeling
What changed: cabinets in white uppers and deep green lowers with polished nickel pulls, dark soapstone-look quartz counters, a white herringbone tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Tinley Park →From the old unit to the new one
- Pick a faucetSend the model you like and a photo of your sink.
- Check the setupA quick look under the sink tells us what else the job needs.
- Written estimateYou get the price in writing, including any valve replacement.
- Install and testInstalled, flushed and checked for leaks, usually in one visit.
Kitchen Faucet Installation questions from Tinley Park homeowners
Can you install a faucet I already bought?
Yes. If anything about it won't suit your sink, we tell you before we start.
How long does it take to install a kitchen faucet?
A straightforward swap is usually done in a short visit; touchless models and valve replacement take a little longer.
Should I replace the shut-off valves too?
Often yes. A new faucet on old valves is the most common setup for a future leak.
Repair or replace a dripping faucet?
We look at the brand, age and condition and tell you which costs less over time.
My new faucet doesn't fit my sink holes. What now?
Mismatched holes are common and easy to solve with a deck plate, accessories or a new hole.
Is Tinley Park water hard, and does it matter for faucet installation?
Tinley Park's water source: Lake Michigan water purchased from the City of Chicago. Aerators and cartridges scale faster with harder water.
Tinley Park contractor registration: do kitchen contractors need it?
Village contractor license required for all contractors; $100/year general, $50/year subcontractor. We take care of that before work starts.
What is the Tinley Park building department phone number?
Permits go through Building Department (Community Development), phone 708-444-5100. When your scope needs one, we prepare the application and schedule the inspections.
Tinley Park plumbing code: who can do the plumbing for faucet installation?
Current plumbing license copies must be submitted before permit issuance; letter of intent with all plumbing permit applications. Our plumbing connections are made by licensed plumbers.
Do I need a permit for faucet installation in Tinley Park?
It depends on the scope. Tinley Park's rule in short: Permit required before construction, alteration or repair; extensive remodeling needs a permit. We handle the permit when one is needed with Building Department (Community Development).
Do you work in my part of Tinley Park?
Yes. Our crews work across Tinley Park — ZIP 60477, 60487 — and nearby Orland Park, Woodridge, Bolingbrook.
Working in Tinley Park
- A lot of Tinley Park kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Tinley Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Building Department (Community Development) handles kitchen permits and pull them for you.
ZIP 60477ZIP 60487
Kitchen Faucet Installation nearby
Other kitchen services in Tinley Park
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Garbage Disposal Installation & RepairDisposals unjammed, repaired or replaced, with the drain connected right.
Kitchen Plumbing RelocationMove the sink to the island or another wall, drain and vent done right.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.