New restaurant needs a trap or interceptor
A build-out without the right grease interceptor can stall at plumbing or health review. We plan the size and location with your fixture layout.
Serving Tinley Park & nearby Orland Park, Woodridge
Grease Trap Installation & Cleaning in Tinley Park, IL
Grease traps and interceptors sized, installed, cleaned and kept on schedule for restaurants and food-service kitchens in Tinley Park.
- Commercial kitchens across Tinley Park ZIP 60477, 60487
- Nights, early mornings and closed days
- Coordination with the fire and health inspectors
Grease trap problems we handle in Tinley Park
Every kitchen that washes greasy pans sends fats, oils and grease toward the sewer, and the trap or interceptor is what stops them. In Tinley Park we size and install grease traps, clean and maintain them on a schedule, and keep the service records the sanitary district or village asks to see.
Health inspector asked about the grease trap
Inspectors want to see maintenance, not just a trap. Our service tickets and log give you the paper trail.
Sewer or rotten-egg smell in the kitchen
If the kitchen smells like a sewer, the trap may be full, the lid may not seal or the vent may be blocked. We find which.
Interceptor overdue for pumping
Large in-ground interceptors are pumped by licensed waste haulers. We schedule the pump-out, inspect the tank and record the service.
Moving into a space with an unknown trap
A second-generation restaurant space may have a trap nobody has opened in years. We locate it, pump or clean it and tell you if it suits your kitchen.
Landlord requires grease maintenance records
When the property manager asks for your trap records, you can forward our dated service tickets and log.
Trap too small for the kitchen
If the trap fills in days, it was sized for a lighter menu or fewer sinks. We review the fixtures and flow and recommend a larger trap or interceptor.
Damaged lid, baffles or rusted trap
Steel traps rust out over the years and in-ground interceptors can crack. We inspect the inside during cleaning and tell you what has failed.
Scope of work
- Site visit and trap locationA look at every grease-producing fixture and where it drains, plus the trap itself.
- SizingTrap or interceptor sized by fixtures, flow rate and the local requirements that apply.
- Permits and plan reviewWe file the plumbing permit and match the trap to what the plan reviewer and FOG program expect.
- InstallationUnder-sink traps set and plumbed, or in-ground interceptors excavated, set and connected.
- Cleaning and pump-outSmall traps cleaned on site; larger interceptors pumped by licensed waste haulers.
- Inspection of baffles and outletWe look inside the empty trap for damage that lets grease pass.
- Line jettingGrease-coated drain lines downstream of the trap cleared with hydro-jetting when needed.
Equipment and options
Flow control fittingsA fitting that limits flow so the trap can do its job.
Poly and coated steel trapsPolyethylene traps don't rust; coated steel is common in older installs.
Gasketed lids and access risersLids and risers that make the trap easy to open and keep smell out of the kitchen.
Under-sink trap or interceptorIndoor traps suit lighter grease loads; interceptors suit busy kitchens and many fixtures.
In-ground grease interceptorsGravity interceptors for high-volume kitchens, serviced by pump truck.
Grease Trap Installation & Cleaning before and after — Tinley Park homes
Before
AfterGrease Trap Installation & Cleaning in a commercial kitchen, Tinley Park
The site: a commercial kitchen in Tinley Park. The main complaint was a grease trap that kept backing up the prep sinks. The result: the same interceptor pumped and the lid closed, service hose coiled on the truck. On site this meant permits and plan review, cleaning and pump-out, plus inspection of baffles and outlet.
Before
AfterAn Orland Park cafe kitchen: before and after
This one is a cafe kitchen in Orland Park. The reason for the call: a FOG notice and no maintenance records. After: the same interceptor pumped and the lid closed, service hose coiled on the truck. The job covered sizing, installation, plus inspection of baffles and outlet.
Grease Trap Installation & Cleaning in Orland Park →
Before
AfterBefore and after: a restaurant kitchen in Tinley Park
The same hood degreased to bare stainless with an inspection sticker area.
Commercial Hood Cleaning in Tinley Park →
Before
AfterKitchen Remodeling in a two-story colonial from the 1990s, Tinley Park
Finished: cabinets in white uppers and deep green lowers with polished nickel pulls, dark soapstone-look quartz counters, a white herringbone tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Tinley Park →
Before
AfterA Tinley Park 1980s two-story: before and after
What changed: the same doors sprayed in light butter yellow, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Tinley Park →From survey to sign-off
- Call or book a visitShare what you're seeing and any letter from the village or inspector.
- Inspect the trapA look inside the trap and at the lines around it.
- Written estimateA clear written quote for the work and the recommended schedule.
- Clean, pump or installWe do the work around your hours and leave the area clean.
- Log and scheduleRecords for your files and a cleaning interval that fits your kitchen.
Grease Trap Installation & Cleaning questions from Tinley Park businesses
What are the grease trap rules in Tinley Park?
Requirements in Tinley Park are set by the village and the sanitary district that treats its sewage. We check the current rules when we size or service a trap.
Do I need a permit to install a grease trap?
Usually yes for a new or replacement trap or interceptor; it's plumbing work and often part of plan review for food establishments.
What records do inspectors want?
Inspectors usually ask when the trap was last cleaned and how the waste was handled. Our log answers both.
Can you service the trap outside our hours?
Yes. We schedule cleaning before opening or after closing to keep the kitchen running.
How does a grease trap work?
Wastewater slows down in the trap, grease floats to the top, solids settle and cleaner water flows out between the baffles.
Does grease trap service need a Tinley Park building permit, and who files it?
Permits go through Building Department (Community Development), phone 708-444-5100. When your scope needs one, we prepare the application and schedule the inspections.
Tinley Park contractor registration: do kitchen contractors need it?
Village contractor license required for all contractors; $100/year general, $50/year subcontractor. We take care of that before work starts.
Do you work in my part of Tinley Park?
Yes. Our crews work across Tinley Park — ZIP 60477, 60487 — and nearby Orland Park, Woodridge, Bolingbrook.
Working in Tinley Park
- Downtime costs you covers, so Tinley Park work is booked around your slow days and closing times.
- When a permit is required, we prepare the submittal for Building Department (Community Development) and meet the fire inspector on site.
- We handle the paperwork landlords and property managers ask for: insurance, access times and scope sign-off.
ZIP 60477ZIP 60487
Grease Trap Installation & Cleaning nearby
Other kitchen services in Tinley Park
Commercial Kitchen Hood InstallationType I and II hoods, grease duct, fans and makeup air, built to NFPA 96.
Commercial Hood CleaningHood, duct and roof fan degreased to bare metal, after hours.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.