Gas oven not heating, but the stovetop works
When the burners light but the oven stays cold, the oven igniter is usually too weak to open the gas valve. It may glow but never light the burner.
Serving Skokie & nearby Evanston, Park Ridge
Oven not heating, burner won't light or the temperature is off? We repair gas and electric ranges, wall ovens and cooktops in Skokie.
Cooking appliances fail in fairly predictable ways. In Skokie we see broken bake and broil elements, igniters too weak to open the gas valve, ovens running hot or cold, surface burners that won't light and self-clean locks that stay shut. Gas valve and igniter work is done by qualified technicians.
When the burners light but the oven stays cold, the oven igniter is usually too weak to open the gas valve. It may glow but never light the burner.
Ovens that stop working right after a self-clean usually have a blown fuse or an overheated part. We find it and replace it.
If bake works but broil doesn't, the broil element or broil igniter is the likely cause. We test and replace it.
If the clock is dead or the oven shows a code and won't heat, we check power, then the parts the code points to.
If you smell gas, don't turn anything on or off. Leave the house and call the gas utility or 911 from outside. Once the utility has made it safe, we diagnose and repair the range.
Self-clean cycles run extremely hot and are hard on the parts. Locks, sensors and fuses can fail during or after one, and we repair them.
Constant clicking after cleaning the stovetop is common: moisture gets into the igniter or a cap gets set off-center. If drying and reseating don't help, a spark module or switch may have failed.
Burned bottoms and dark edges when the settings haven't changed often mean the temperature sensor or the control is at fault.
Problem
Fixed
DetailThe site: a 1990s two-story colonial in Skokie. Before: white appliances. The reason for the call: an oven that ran hot and burned dinner. After: the oven with a new bake element installed, heating evenly with the oven light on. Work included safety and power check, sensor and control tests, plus burner and switch checks.
Before
AfterThe site: a prewar foursquare in Evanston. Before: white enamel gas range and a white refrigerator. What bothered the owners most: burners that clicked but wouldn't catch. The result: the oven with a new bake element installed, heating evenly with the oven light on. The job covered safety and power check, door, lock and gasket check, plus written quote.
Oven, Stove & Cooktop Repair in Evanston →
Before
AfterThis one is a 1990s two-story colonial in Glenview. What we started with: almond appliances. The main complaint was an older range with a burned-out bake element. The result: the oven with a new bake element installed, heating evenly with the oven light on. On site this meant safety and power check, element and igniter tests, plus repair by qualified technicians.
Oven, Stove & Cooktop Repair in Glenview →
Before
AfterCabinets in light butter yellow with polished nickel pulls, black honed granite counters, a gray beveled subway tile backsplash, light oak hardwood flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Skokie →
Before
AfterThe same doors sprayed in powder blue, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Skokie →ZIP 60076ZIP 60077ZIP 60203
Refrigerator & Ice Maker RepairNot cooling, frost, leaks and dead ice makers diagnosed and fixed.
Dishwasher RepairDraining, cleaning, leaking and door problems found and fixed.
Microwave RepairOver-the-range and built-in microwaves diagnosed and repaired safely.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Call us — we'll check your ZIP, answer your questions and book an in-home estimate.