Electric burner or element not working
A coil burner that won't heat may have a burned element, a loose terminal block or a bad infinite switch behind the knob.
Serving Glenview & nearby Northbrook, Park Ridge
Oven, Stove & Cooktop Repair in Glenview, IL
Oven not heating, burner won't light or the temperature is off? We repair gas and electric ranges, wall ovens and cooktops in Glenview.
- Technicians covering Glenview ZIP 60025, 60026, 60062
- Diagnosis first, then a written price for the repair
- Honest advice when replacing makes more sense
Oven, stove and cooktop problems we fix in Glenview
An oven that won't heat or a burner that only clicks usually comes down to one worn part: an igniter, a bake element, a temperature sensor or a switch. Our technicians diagnose gas and electric ranges in Glenview, explain what failed and give you a written quote before the repair. If you smell gas, leave the house and call the gas utility or 911 first.
Oven not reaching the set temperature
An oven that never gets up to temperature, or takes forever to preheat, usually has a failing heat source or a sensor out of range. We test both.
Gas oven not heating, but the stovetop works
A gas oven that won't light while the cooktop works fine points to the oven igniter, the valve or the control. Our qualified technicians test them in that order.
Gas smell near the stove
If you smell gas, don't turn anything on or off. Leave the house and call the gas utility or 911 from outside. Once the utility has made it safe, we diagnose and repair the range.
Self-clean door stuck locked
After a self-clean cycle, the door lock should release once the oven cools. If it stays locked, the lock motor, latch switch or control may have failed.
Gas burner clicking but not lighting
A burner that clicks without lighting usually has a wet or dirty igniter, a misaligned burner cap or a clogged port. Cleaning and seating the cap often fixes it.
Oven not heating after self-clean
The heat of a self-clean cycle can blow a thermal fuse or damage a control or element. If the oven went dead after cleaning, that's where we look first.
Oven running too hot or burning food
If the oven keeps heating past the set temperature, it needs attention quickly. We check the sensor, relays and the thermostat on older models.
Where we look first
- Temperature testOven temperature checked against the setting with a thermometer.
- Element and igniter testsBake and broil elements and igniters tested for continuity and current draw.
- Sensor and control testsTemperature sensor resistance, relays and the control board checked.
- Burner and switch checksEach burner tested to find the one that won't light or heat.
- Door, lock and gasket checkWe check that the door seals and the lock releases.
- Written quoteCause explained and parts and labor quoted in writing before work starts.
- Repair by qualified techniciansWe install the part, and gas-side repairs are handled by qualified technicians.
Parts we replace
Wall ovensSingle and double wall ovens, serviced in place or pulled when needed.
Heating partsThe parts that turn power or gas into heat.
Controls and sensorsTemperature sensors, control boards, infinite switches and spark modules.
Door and lock partsParts that seal and lock the oven door.
Gas and electric rangesThe everyday range in most kitchens, whichever fuel it uses.
Kitchens like yours in Glenview: before and after
Problem
Fixed
DetailA Glenview 1990s two-story colonial: before and after
A 1990s two-story colonial near The Glen, a typical kitchen for Glenview. Before: almond appliances. What bothered the owners most: an older range with a burned-out bake element. The result: the oven with a new bake element installed, heating evenly with the oven light on. On site this meant temperature test, door, lock and gasket check, plus repair by qualified technicians.
Before
AfterNorthbrook kitchen, 1990s two-story colonial: oven, stove & cooktop repair
This one is a 1990s two-story colonial near Techny. What we started with: black appliances. What bothered the owners most: an oven that wouldn't heat up. The result: the oven with a new bake element installed, heating evenly with the oven light on. On site this meant element and igniter tests, door, lock and gasket check, plus repair by qualified technicians.
Oven, Stove & Cooktop Repair in Northbrook →
Before
AfterA Park Ridge 1980s two-story: before and after
This one is a 1980s two-story in Park Ridge. Before: white appliances. What bothered the owners most: an oven that ran hot and burned dinner. The result: the oven with a new bake element installed, heating evenly with the oven light on. Work included element and igniter tests, burner and switch checks, plus written quote.
Oven, Stove & Cooktop Repair in Park Ridge →
Before
AfterBefore and after: a 1960s ranch in Glenview
Cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Glenview →
Before
AfterGlenview kitchen, 1950s ranch: kitchen cabinet painting
What changed: the same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glenview →The repair visit
- Tell us the symptomDescribe what the oven or stove is doing and send the model number from the frame or drawer.
- Diagnosis visitA technician tests heat, ignition, sensors and controls to find the cause.
- Written quoteParts and labor in writing, with a straight answer on repair versus replace.
- Repair and testThe part goes in, the oven heats to temperature and every burner lights.
Oven, Stove & Cooktop Repair questions from Glenview homeowners
Why is my oven not heating?
The most common causes are a failed bake element or igniter. We test those first, then the sensor and the controls.
Can I use the stovetop if the oven is broken?
Many oven faults don't affect the burners. But stop using it if you smell gas or burning or see sparks.
How long does oven or stove repair take?
It depends on the part and access. We give you a time frame with the quote.
What should I do if I smell gas?
Leave the house right away, don't use switches, phones or flames inside, and call the gas utility or 911 from outside. Call us for the repair once it's been made safe.
How much does oven repair cost?
It depends on the part, the model and whether it's gas or electric. We charge for the diagnosis and give a written quote for parts and labor before repairing.
Do I need a permit for oven and stove repair in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Oven, Stove & Cooktop Repair nearby
Other kitchen services in Glenview
Refrigerator & Ice Maker RepairNot cooling, frost, leaks and dead ice makers diagnosed and fixed.
Dishwasher RepairDraining, cleaning, leaking and door problems found and fixed.
Microwave RepairOver-the-range and built-in microwaves diagnosed and repaired safely.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.