Broiler not working
A broiler that won't heat usually has a failed broil element on electric ovens, or a weak igniter on gas models.
Serving Northbrook & nearby Glenview, Highland Park
Oven, Stove & Cooktop Repair in Northbrook, IL
Oven not heating, burner won't light or the temperature is off? We repair gas and electric ranges, wall ovens and cooktops in Northbrook.
- Repairs across Northbrook ZIP 60062
- We find the cause, not just the symptom
- Parts and labor quoted before work starts
Oven, stove and cooktop problems we fix in Northbrook
An oven that won't heat or a burner that only clicks usually comes down to one worn part: an igniter, a bake element, a temperature sensor or a switch. Our technicians diagnose gas and electric ranges in Northbrook, explain what failed and give you a written quote before the repair. If you smell gas, leave the house and call the gas utility or 911 first.
Electric burner or element not working
When one burner stays cold while the others work, the fault is in that burner's element, switch or wiring. We trace it.
Oven not heating after self-clean
Ovens that stop working right after a self-clean usually have a blown fuse or an overheated part. We find it and replace it.
Gas burner clicking but not lighting
A burner that clicks without lighting usually has a wet or dirty igniter, a misaligned burner cap or a clogged port. Cleaning and seating the cap often fixes it.
Gas oven not heating, but the stovetop works
Gas ovens use a hot-surface igniter that weakens with age. If it glows and nothing happens, it's not drawing enough current to open the valve; replacing it is a common fix.
Uneven baking
Hot spots usually mean heat isn't being spread or held. We check the convection fan, the elements and the door gasket.
Display blank or error code
Error codes point to a system, not always a single part. We check the sensor, the wiring and the control the code refers to.
Oven running too hot or burning food
A sensor that has drifted or a stuck relay on the control board can make the oven run well above the setting. We test and replace the faulty part.
Where we look first
- Safety and power checkWe confirm power, gas supply and that there's no gas odor before testing anything.
- Element and igniter testsBake and broil elements and igniters tested for continuity and current draw.
- Sensor and control testsTemperature sensor resistance, relays and the control board checked.
- Burner and switch checksSurface burners, caps, igniters, switches and spark modules checked.
- Door, lock and gasket checkWe check that the door seals and the lock releases.
- Written quoteCause explained and parts and labor quoted in writing before work starts.
- Repair by qualified techniciansFailed parts replaced; gas valve and igniter work done by qualified technicians.
Common fixes and parts
Controls and sensorsTemperature sensors, control boards, infinite switches and spark modules.
Wall ovensBuilt-in ovens in a wall cabinet.
Heating partsThe parts that turn power or gas into heat.
Door and lock partsParts that seal and lock the oven door.
Gas and electric rangesFreestanding and slide-in ranges, gas, electric and dual-fuel.
Oven, Stove & Cooktop Repair before and after — Northbrook homes
Problem
Fixed
DetailBefore and after: a 1990s two-story colonial in Northbrook
This one is a 1990s two-story colonial near Downtown Northbrook. Before: black appliances. The reason for the call: an oven that wouldn't heat up. The result: the oven with a new bake element installed, heating evenly with the oven light on. Work included element and igniter tests, burner and switch checks, plus repair by qualified technicians.
Before
AfterOven, Stove & Cooktop Repair in a 1980s two-story, Glenview
This one is a 1980s two-story near The Park. The kitchen as it was: almond appliances. The main complaint was an oven that no longer held its temperature. Finished kitchen: the oven with a new bake element installed, heating evenly with the oven light on. On site this meant element and igniter tests, written quote, plus repair by qualified technicians.
Oven, Stove & Cooktop Repair in Glenview →
Before
AfterBefore and after: a 1990s two-story colonial in Buffalo Grove
The site: a 1990s two-story colonial near Windfield. What we started with: white appliances. The main complaint was an oven that ran hot and burned dinner. The result: the oven with a new bake element installed, heating evenly with the oven light on. Work included sensor and control tests, written quote, plus repair by qualified technicians.
Oven, Stove & Cooktop Repair in Buffalo Grove →
Before
AfterKitchen Remodeling in a postwar bi-level, Northbrook
Finished: cabinets in forest green with matte black pulls, black honed granite counters, a green zellige-look tile backsplash, warm oak luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Northbrook →
Before
AfterKitchen Cabinet Painting in a 1950s ranch, Northbrook
Finished: the same doors sprayed in deep navy, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Northbrook →How the repair goes
- Tell us the symptomCall or use the form with the problem and the model number.
- Diagnosis visitA technician tests heat, ignition, sensors and controls to find the cause.
- Written quoteParts and labor in writing, with a straight answer on repair versus replace.
- Repair and testWe repair it, test it and clean up.
Oven, Stove & Cooktop Repair questions from Northbrook homeowners
How long does oven or stove repair take?
Elements and igniters are often quick. Control boards and wall ovens that need to come out can take longer.
Why is my oven not heating?
On electric ovens it's usually a burned-out bake element; on gas ovens a weak igniter. A sensor, a fuse or the control board can also be the cause.
Why won't my stove burner light?
Usually the cap is off-center, the burner ports are clogged or the igniter is wet. If it clicks but won't catch after drying and cleaning, the igniter or spark module needs replacing.
Is it worth repairing an oven?
Usually, yes. Elements, igniters, sensors and switches are common and reasonable repairs. A failed control board on an older budget range is where replacement starts to make sense.
Do you repair gas appliances?
Yes. Gas valve, igniter and burner work is done by qualified technicians, and every gas connection we touch is checked for leaks.
Do I need a permit for oven and stove repair in Northbrook?
It depends on the scope. Northbrook's rule in short: Village lists separate permit types: Single Family Alterations - Interior, Electrical (new wiring/outlets), and Plumbing (new fixtures). We handle the permit when one is needed with Development & Planning Services.
Do you work in my part of Northbrook?
Yes. Our crews work across Northbrook, including Techny, Downtown Northbrook — ZIP 60062 — and nearby Glenview, Highland Park, Mount Prospect.
Working in Northbrook
- A lot of Northbrook kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Northbrook homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Development & Planning Services handles kitchen permits and pull them for you.
TechnyDowntown Northbrook
ZIP 60062
Oven, Stove & Cooktop Repair nearby
Other kitchen services in Northbrook
Refrigerator & Ice Maker RepairNot cooling, frost, leaks and dead ice makers diagnosed and fixed.
Dishwasher RepairDraining, cleaning, leaking and door problems found and fixed.
Microwave RepairOver-the-range and built-in microwaves diagnosed and repaired safely.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.