Serving Roselle & nearby Bloomingdale, Hanover Park

Kitchen Faucet Installation in Roselle, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Roselle.

  • Installers working in Roselle ZIP 60172
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Roselle licensed plumber will call you.

Kitchen faucet problems we fix in Roselle

We install kitchen faucets in Roselle: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.

Scale on the aerator from lake water

White crust on the spray face is mineral buildup. Many Roselle owners just need the aerator cleaned or swapped, not a new faucet.

Worried about lead at the kitchen tap

If Roselle lists your line as lead, a new faucet plus a filter certified for lead reduction is a sensible step for drinking water.

Spout too short or too low

Spout height and reach matter as much as style. We match the faucet to your sink size so water lands in the center of the bowl.

Pull-down sprayer that won't retract

A pull-down head that hangs instead of snapping back usually has a misplaced counterweight or a hose catching under the sink. We fix the routing.

Faucet loose or wobbling on the sink

A faucet that rocks when you use it has a loose mounting nut underneath. We tighten or replace the mounting hardware and reseat the gasket.

Leaking from the handle

Leaks at the lever come from the valve inside the body. We replace the cartridge or the whole faucet, depending on its age.

Old two-handle faucet with a side sprayer

Many owners replace the old two-handle setup with a single lever and a pull-down spray. We cover the leftover holes with a deck plate.

Shut-off valves that won't turn

Seized stops are the most common surprise on a faucet job. New quarter-turn valves make the next repair easy.

What we hook up and check

  • Check the sink and suppliesA check of the sink holes, shut-offs and clearances so the faucet fits.
  • Shut off and removeThe old faucet and side sprayer taken off without damaging the sink.
  • Clean the deckOld putty, caulk and mineral residue cleaned from the mounting surface.
  • Replace valves when neededSeized or leaking stops replaced with quarter-turn valves.
  • Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
  • Supply connectionsHot and cold lines hooked up to the valves.
  • Power for touchless modelsControl box mounted and battery pack or plug-in adapter set up.

Models, parts and fittings

FinishesStainless, chrome, matte black and brass finishes, each with its own care.
Touchless and touch faucetsHands-free models for messy hands, with a control box below.
Filtered-water and pot-filler tapsExtra taps that use a spare hole or a separate supply line.
Pull-out faucetsA shorter spout with a head that pulls straight out toward you.
Deck platesTrim that lets a one-hole faucet sit cleanly on a three-hole sink.

Kitchens like yours in Roselle: before and after

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Kitchen Faucet Installation in a 1980s two-story, Roselle

A 1980s two-story in Roselle, a typical kitchen for Roselle. What we started with: solid-surface integrated sink. The main complaint was a leaking faucet with handles that were hard to turn. The result: a new single-handle pull-down faucet with a clean caulk line. On site this meant check the sink and supplies, pull-down hose and weight, plus power for touchless models.

Kitchen Faucet Installation project in Bloomingdale, beforeBefore
Kitchen Faucet Installation project in Bloomingdale, afterAfter

A Bloomingdale two-story colonial from the 1990s: before and after

A two-story colonial from the 1990s in Bloomingdale, a typical kitchen for Bloomingdale. Before: white double sink. The main complaint was a leaking two-handle faucet with a side sprayer. After: a new single-handle pull-down faucet with a clean caulk line. The job covered clean the deck, replace valves when needed, plus power for touchless models.

Kitchen Faucet Installation in Bloomingdale →
Kitchen Plumbing Relocation project near Roselle, beforeBefore
Kitchen Plumbing Relocation project near Roselle, afterAfter

A Roselle 1970s tract home: before and after

Finished: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Roselle →
Kitchen Remodeling project near Roselle, beforeBefore
Kitchen Remodeling project near Roselle, afterAfter

Roselle kitchen, 1970s split-level: kitchen remodeling

What changed: cabinets in light greige with brushed nickel bar pulls, light marble-look quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Roselle →
Kitchen Cabinet Painting project near Roselle, beforeBefore
Kitchen Cabinet Painting project near Roselle, afterAfter

Roselle kitchen, 1970s tract home: kitchen cabinet painting

The same doors sprayed in deep navy, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Roselle →

Install day

  1. Pick a faucetSend the model you like and a photo of your sink.
  2. Check the setupA quick look under the sink tells us what else the job needs.
  3. Written estimateYou get the price in writing, including any valve replacement.
  4. Install and testInstalled, flushed and checked for leaks, usually in one visit.

Kitchen Faucet Installation questions from Roselle homeowners

What does a faucet installation cost?
We price it after a look at the setup, and it comes in writing.
Are touchless faucets worth it?
Many owners like them. Expect to change batteries or use a plug-in adapter, and know there's a manual mode too.
Pull-down or pull-out: which should I choose?
If there's room above the sink, a pull-down. If space is tight, a pull-out.
How long does it take to install a kitchen faucet?
Often an hour or two. Seized valves, a stuck old faucet or a new hole in stone add time.
Can a handyman install a kitchen faucet?
Our faucet installs are done by licensed plumbers, which matters when a valve or supply line turns out to need replacing.
Roselle water: how does it affect faucet installation?
Roselle's water source: Lake Michigan water via City of Chicago and DuPage Water Commission. Aerators and cartridges scale faster with harder water.
What is the Roselle building department phone number?
Permits go through Development & Engineering Services (Building & Zoning), phone 630-671-2821. When your scope needs one, we prepare the application and schedule the inspections.
Roselle plumbing code: who can do the plumbing for faucet installation?
Plumbers provide a State plumber's license in place of the $75 Village fee; bond and insurance still required. Our plumbing connections are made by licensed plumbers.
Do I need a Roselle-registered contractor for faucet installation?
Contractors must register with the Village via Cloudpermit and be licensed: surety bond, certificate of insurance naming the Village, $75 fee. We take care of that before work starts.
What is Roselle doing about lead water lines?
Village completed service line inventory; 108 suspected lead lines remain (April 2026). A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a permit for faucet installation in Roselle?
It depends on the scope. Roselle's rule in short: Permit required for projects including bathroom and kitchen remodeling, electrical and plumbing work; also water heater, roof, HVAC. We handle the permit when one is needed with Development & Engineering Services (Building & Zoning).
Do you work in my part of Roselle?
Yes. Our crews work across Roselle — ZIP 60172 — and nearby Bloomingdale, Hanover Park, Schaumburg.

Working in Roselle

  • A lot of Roselle kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Most Roselle homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Development & Engineering Services (Building & Zoning) handles kitchen permits and pull them for you.

ZIP 60172

Kitchen Faucet Installation nearby

Planning a kitchen project in Roselle?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback