Serving Itasca & nearby Wood Dale, Elk Grove Village

Kitchen Faucet Installation in Itasca, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Itasca.

  • Installers working in Itasca ZIP 60143
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Itasca licensed plumber will call you.

Kitchen faucet problems we fix in Itasca

We install kitchen faucets in Itasca: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.

Scale on the aerator from lake water

Treated Lake Michigan water still leaves some mineral scale in aerators and spray heads over time. Cleaning them restores the spray pattern.

Hard well water wearing out faucets

On well water, mineral buildup shortens faucet life. We suggest models with serviceable cartridges and talk about softening if the scale is heavy.

Leak under the sink at the faucet lines

Drips under the sink near the faucet shank point to a loose connection or a split hose. We redo the supply side and test it.

Hole count doesn't match the new faucet

Sinks and counters have one to four holes. A deck plate covers unused holes, or they can hold a soap dispenser, side sprayer or filtered-water tap.

Low flow or a sputtering spout

Before you replace a faucet for low pressure, we check the aerator, the cartridge and the shut-off valves. Often one of them is the cause.

Wanting a touchless faucet

A touchless kitchen faucet is a standard install with one extra piece: the control box and its power supply. We fit both.

Drip from the spout that won't stop

A steady drip with the handle off means the cartridge or valve seat is worn. We swap the cartridge when it's available, or replace the faucet.

Faucet loose or wobbling on the sink

If the faucet turns or tilts when you push the handle, the nut below has backed off. We secure it from inside the cabinet.

Included with the install

  • Check the sink and suppliesWe look at the hole layout, the valves and the space under the sink before you choose.
  • Shut off and removeThe old faucet and side sprayer taken off without damaging the sink.
  • Replace valves when neededSeized or leaking stops replaced with quarter-turn valves.
  • Mount the faucetNew faucet mounted level and secure on the sink or counter.
  • Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
  • Supply connectionsNew braided supply lines connected and tightened without strain.
  • Extra holesUnused holes covered or fitted with a soap dispenser or filtered-water tap.

What to pick before the install

Deck platesTrim that lets a one-hole faucet sit cleanly on a three-hole sink.
Bridge and two-handle faucetsThree-hole faucets with a classic look, often with a side sprayer.
Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
FinishesChrome wipes clean easily; matte and brushed finishes hide spots.
Filtered-water and pot-filler tapsExtra taps that use a spare hole or a separate supply line.

Kitchen Faucet Installation before and after — Itasca homes

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Itasca kitchen, 1980s two-story: kitchen faucet installation

A 1980s two-story near South Side, a typical kitchen for Itasca. The kitchen as it was: white double sink. The reason for the call: a leaking two-handle faucet with a side sprayer. After: a new single-handle pull-down faucet with a clean caulk line. The job covered mount the faucet, pull-down hose and weight, plus supply connections.

Kitchen Faucet Installation project in Wood Dale, beforeBefore
Kitchen Faucet Installation project in Wood Dale, afterAfter

A Wood Dale two-story colonial from the 1990s: before and after

A two-story colonial from the 1990s in Wood Dale, a typical kitchen for Wood Dale. The kitchen as it was: solid-surface integrated sink. The reason for the call: an old faucet that dripped and was crusted with scale. After: a new single-handle pull-down faucet with a clean caulk line. The job covered check the sink and supplies, supply connections, plus extra holes.

Kitchen Faucet Installation in Wood Dale →
Kitchen Faucet Installation project in Addison, beforeBefore
Kitchen Faucet Installation project in Addison, afterAfter

Kitchen Faucet Installation in a two-story colonial from the 1990s, Addison

A two-story colonial from the 1990s in Addison, a typical kitchen for Addison. Before: white cast-iron double sink. The reason for the call: an old two-handle faucet that dripped into a worn porcelain bowl. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant replace valves when needed, mount the faucet, plus extra holes.

Kitchen Faucet Installation in Addison →
Kitchen Plumbing Relocation project near Itasca, beforeBefore
Kitchen Plumbing Relocation project near Itasca, afterAfter

Itasca kitchen, 1980s two-story: kitchen plumbing relocation

What changed: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Itasca →
Kitchen Remodeling project near Itasca, beforeBefore
Kitchen Remodeling project near Itasca, afterAfter

Itasca kitchen, 1980s two-story: kitchen remodeling

Finished: cabinets in light butter yellow with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Itasca →

Install day

  1. Pick a faucetChoose one yourself or ask us what fits your sink and holes.
  2. Check the setupWe confirm the hole count, valves and clearances.
  3. Written estimateYou get the price in writing, including any valve replacement.
  4. Install and testInstalled, flushed and checked for leaks, usually in one visit.

Kitchen Faucet Installation questions from Itasca homeowners

How long does it take to install a kitchen faucet?
Most installs take a couple of hours from shut-off to final test.
Why is my faucet leaking from the base?
Worn spout seals. We tell you if a repair kit fixes it or if a new faucet is the better buy.
Should I replace the shut-off valves too?
If they are old multi-turn valves or won't close fully, yes. It's easiest while the faucet is already off.
What does a faucet installation cost?
A plain swap costs less than a touchless install with new valves. You get a line-item price before work starts.
Pull-down or pull-out: which should I choose?
Pull-down suits deep sinks and tall clearance; pull-out works better under low cabinets or a window.
Can you do faucet installation in an Itasca condo?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
What is Itasca doing about lead water lines?
Village has developed a service line material inventory; copy available from the Water/Sewer Department (itasca.com/2033). A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Is Itasca water hard, and does it matter for faucet installation?
Itasca's water source: Lake Michigan water purchased via the DuPage Water Commission (from the City of Chicago); two emergency backup wells not in use. Aerators and cartridges scale faster with harder water.
Does faucet installation need a Itasca building permit, and who files it?
Permits go through Community Development Department (Building Division), phone (630) 773-5568. When your scope needs one, we prepare the application and schedule the inspections.
Itasca plumbing code: who can do the plumbing for faucet installation?
Plumbing contractors must hold a State plumbing license (055 and 058) and provide a signed letter of intent from the plumber of record for each permit, plus a copy of the signed proposal. Our plumbing connections are made by licensed plumbers.
Do you work in my part of Itasca?
Yes. Our crews work across Itasca, including North Side, South Side, Nordic Park, The Ranchettes — ZIP 60143 — and nearby Wood Dale, Elk Grove Village, Addison.

Working in Itasca

  • A lot of Itasca kitchens date from the 1970s. We know these layouts well and what is worth keeping.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • Live in the Itasca Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

North SideSouth SideNordic ParkThe RanchettesItasca Historical DistrictWalnut Street downtown

ZIP 60143

Kitchen Faucet Installation nearby

Planning a kitchen project in Itasca?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback