Mold inside a wall after a leak
Stains or bubbling paint on a kitchen wall can mean moisture and growth inside. We cut it open under containment and clean the framing.
Serving Plainfield & nearby Bolingbrook, Naperville
Kitchen Mold Remediation in Plainfield, IL
Mold under the sink, behind the dishwasher or inside a wall? We fix the moisture and remove the mold from Plainfield kitchens.
- Crews covering Plainfield ZIP 60544, 60585, 60586, 60543
- We stop the cause first, then dry, clean and rebuild
- Photos and notes you can share with your insurer
Kitchen mold problems we take care of in Plainfield
Mold in a kitchen almost always follows water: a slow drip under the sink, a dishwasher leak or condensation behind the fridge. In Plainfield we find and fix that moisture first, then contain the area, remove the affected materials and clean what stays.
Condensation and window mold
Cooking steam without a working range hood can condense on cold windows and exterior walls, leading to growth on sills and drywall. We remove it and talk through ventilation.
Mold under the kitchen sink
Mold inside the sink cabinet is a symptom. We trace the water, cut out the affected cabinet bottom or back and check the wall behind it.
Mold behind the refrigerator
The space behind a fridge gets little air. A small leak there can lead to mold on drywall and flooring we remove and replace.
Mold on cabinet backs and particleboard
We remove mold-affected particleboard and match new panels to the cabinet where we can.
Mold found during a remodel
If your remodel uncovered mold, we can stop that area, remove it properly and hand it back ready for the new kitchen.
Mold behind or under the dishwasher
Musty smells near the dishwasher often lead to mold on the subfloor or cabinet side. We remove the affected materials after fixing the leak.
A large area of mold
When growth covers a large area, roughly the size EPA guidance treats as larger, containment and the work plan get more involved. We size the containment to the job.
What the restoration covers
- Inspection and moisture readingsFirst we map how far the moisture and growth reach and what caused them.
- Fixing the moisture sourceEPA advises fixing the water problem first; otherwise the mold returns.
- ContainmentThe work area is sealed with plastic sheeting, and the rest of the kitchen and house is protected.
- HEPA air filtrationAir scrubbers with HEPA filters run during the work, often with negative pressure on the containment.
- Cleaning what staysSolid materials that remain are cleaned of growth and debris.
- Final cleaningThe containment area is HEPA-vacuumed and wiped down before the plastic comes down.
- RebuildNew cabinet panels, drywall, insulation and finishes go back in.
Tools of the job
Mold-resistant materialsMoisture-resistant drywall or plywood cabinet bottoms where it makes sense.
HEPA air scrubbersFiltered air movement that keeps the work area under control.
Containment sheetingSealed plastic walls that keep the work separate from the rest of the home.
Moisture metersReadings that show where moisture is and when drying is done.
HEPA vacuumsVacuums with HEPA filters used to clean surfaces and debris.
Before and after: kitchens near Plainfield
Problem
Fixed
DetailPlainfield kitchen, 2000s two-story with an open kitchen: kitchen mold remediation
The site: a 2000s two-story with an open kitchen in Plainfield. The kitchen as it was: undermount stainless double sink and cherry-stained shaker cabinets. The main complaint was mold under the kitchen sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. Work included fixing the moisture source, final cleaning, plus rebuild.
Before
AfterBolingbrook kitchen, two-story colonial from the 1990s: kitchen mold remediation
A two-story colonial from the 1990s in Bolingbrook, a typical kitchen for Bolingbrook. What we started with: white double sink and white thermofoil cabinets peeling at the edges, oak trim. What bothered the owners most: a swollen, spotted cabinet floor under the sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. The job covered inspection and moisture readings, containment, plus final cleaning.
Kitchen Mold Remediation in Bolingbrook →
Before
AfterNaperville kitchen, 1990s two-story colonial: kitchen mold remediation
The site: a 1990s two-story colonial near Highlands. What we started with: white cast-iron double sink and honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs. What bothered the owners most: mold under the kitchen sink. The result: the sink cabinet cleaned and dried, a new back panel and cabinet floor installed and the drain leak fixed. On site this meant inspection and moisture readings, HEPA air filtration, plus cleaning what stays.
Kitchen Mold Remediation in Naperville →
Before
AfterA Plainfield 2000s open-plan home: before and after
Finished: cabinets in light greige with brushed nickel bar pulls, light marble-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Plainfield →
Before
AfterBefore and after: a 2000s open-plan home in Plainfield
Finished: the same doors sprayed in white uppers and deep green lowers, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Plainfield →Step by step after damage
- InspectA visit to assess the growth, the moisture and the plan.
- Fix the moistureThe leak or condensation is repaired before removal begins.
- Contain and removeContainment goes up, then moldy materials are removed and surfaces cleaned.
- Dry and rebuildOnce dry and clean, the kitchen is put back together.
Kitchen Mold Remediation questions from Plainfield homeowners
Do you need a license for mold remediation in Illinois?
No state license exists for it here. What matters is the method: source fixed, containment, HEPA filtration and removal of affected materials.
What's the difference between mold removal and mold remediation?
Remediation is the full process: source, containment, removal, cleaning and drying. Simply cleaning the surface is removal.
What affects the cost of mold remediation?
The size of the area, where it is, how much has to be removed, containment needs and the rebuild. We give a written, itemized estimate after the inspection.
Can I clean small mold spots myself?
EPA guidance says many small areas can be handled by a homeowner, and larger areas, roughly over 10 square feet, are better left to professionals. Either way, fix the moisture.
Can mold be removed without replacing my cabinets?
In most cases we replace a panel or one cabinet, not the kitchen.
Does kitchen mold remediation need a Plainfield building permit, and who files it?
Permits go through Village of Plainfield Building & Code Enforcement, phone (815) 439-2937. When your scope needs one, we prepare the application and schedule the inspections.
Do you work in my part of Plainfield?
Yes. Our crews work across Plainfield — ZIP 60544, 60585, 60586, 60543 — and nearby Bolingbrook, Naperville, Aurora.
Working in Plainfield
- Many Plainfield homes were built after 2000, so cabinet boxes and plumbing are usually solid and an update moves fast.
- Most Plainfield homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Downtown Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
ZIP 60544ZIP 60585ZIP 60586ZIP 60543
Kitchen Mold Remediation nearby
Other kitchen services in Plainfield
Kitchen Water Damage RestorationLeaks stopped, water extracted, cabinets and floors dried and rebuilt.
Kitchen Fire & Smoke RestorationSoot cleaned, smoke odor removed, burned cabinets and walls rebuilt.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.