Serving Skokie & nearby Evanston, Park Ridge

Kitchen Faucet Installation in Skokie, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Skokie.

  • Serving Skokie ZIP 60076, 60077, 60203
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Skokie licensed plumber will call you.

Kitchen faucet problems we fix in Skokie

We install kitchen faucets in Skokie: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.

Scale on the aerator from lake water

Lake water carries some minerals that collect in the faucet's screen. We clean or replace the aerator before suggesting anything bigger.

Worried about lead at the kitchen tap

Faucets sold for drinking water must meet federal lead-free rules. The bigger concern in older homes is the service line; flush before drinking and consider a lead-certified filter.

Pull-down sprayer that won't retract

A pull-down head that hangs instead of snapping back usually has a misplaced counterweight or a hose catching under the sink. We fix the routing.

Wanting a touchless faucet

Touchless faucets need power under the sink, either batteries or a plug-in adapter. We plan the control box and its power when we install.

Drip from the spout that won't stop

If the spout drips day and night, the seal inside the valve has worn. We repair it or put in a new faucet.

Shut-off valves that won't turn

Seized stops are the most common surprise on a faucet job. New quarter-turn valves make the next repair easy.

Faucet leaking from the base

A puddle at the foot of the faucet each time you use it comes from the spout seals. We rebuild it if parts exist, or install a new one.

Hole count doesn't match the new faucet

We match the faucet to what's there: one hole, three holes or an undermount counter we can core-drill.

Included with the install

  • Check the sink and suppliesA check of the sink holes, shut-offs and clearances so the faucet fits.
  • Shut off and removeWater off, supply lines disconnected and the old faucet unbolted.
  • Replace valves when neededSeized or leaking stops replaced with quarter-turn valves.
  • Pull-down hose and weightSpray hose routed clear of the drain and disposal, weight set so it retracts.
  • Supply connectionsNew braided supply lines connected and tightened without strain.
  • Extra holesDeck plate, soap pump or second faucet for any leftover holes.
  • Flush and testAerator off, lines flushed of debris, then every joint checked under pressure.

Models, parts and fittings

Pull-out faucetsGood under low cabinets or windows where a tall spout won't fit.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.
FinishesChrome wipes clean easily; matte and brushed finishes hide spots.
Touchless and touch faucetsSensor or tap-to-start faucets that need batteries or an outlet under the sink.
Bridge and two-handle faucetsThree-hole faucets with a classic look, often with a side sprayer.

Before and after: kitchens near Skokie

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

A Skokie two-story colonial from the 1990s: before and after

This one is a two-story colonial from the 1990s in Skokie. Before: solid-surface integrated sink. The reason for the call: an old faucet that dripped and was crusted with scale. After: a new single-handle pull-down faucet with a clean caulk line. Work included check the sink and supplies, pull-down hose and weight, plus supply connections.

Kitchen Faucet Installation project in Evanston, beforeBefore
Kitchen Faucet Installation project in Evanston, afterAfter

Evanston kitchen, vintage courtyard condo: kitchen faucet installation

The site: a vintage courtyard condo in Evanston. Before: single stainless drop-in sink. The main complaint was a leaking faucet with handles that were hard to turn. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant shut off and remove, replace valves when needed, plus flush and test.

Kitchen Faucet Installation in Evanston →
Kitchen Faucet Installation project in Park Ridge, beforeBefore
Kitchen Faucet Installation project in Park Ridge, afterAfter

Before and after: a two-story colonial from the 1990s in Park Ridge

A two-story colonial from the 1990s in Park Ridge, a typical kitchen for Park Ridge. What we started with: white cast-iron double sink. The reason for the call: handles that leaked and a sprayer that dribbled. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant check the sink and supplies, replace valves when needed, plus supply connections.

Kitchen Faucet Installation in Park Ridge →
Kitchen Plumbing Relocation project near Skokie, beforeBefore
Kitchen Plumbing Relocation project near Skokie, afterAfter

Kitchen Plumbing Relocation in a 1950s ranch, Skokie

What changed: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Skokie →
Kitchen Remodeling project near Skokie, beforeBefore
Kitchen Remodeling project near Skokie, afterAfter

A Skokie postwar bi-level: before and after

What changed: cabinets in light butter yellow with polished nickel pulls, black honed granite counters, a gray beveled subway tile backsplash, light oak hardwood flooring and two glass pendants and recessed lights.

Kitchen Remodeling in Skokie →

How the install goes

  1. Pick a faucetSend the model you like and a photo of your sink.
  2. Check the setupA quick look under the sink tells us what else the job needs.
  3. Written estimateYou get the price in writing, including any valve replacement.
  4. Install and testThe faucet goes in, a licensed plumber connects it and we test every joint.

Kitchen Faucet Installation questions from Skokie homeowners

Why is my faucet leaking from the base?
Worn spout seals. We tell you if a repair kit fixes it or if a new faucet is the better buy.
Are touchless faucets worth it?
If hands-free matters to you, yes. Plan for the control box and its power supply.
How long does it take to install a kitchen faucet?
Often an hour or two. Seized valves, a stuck old faucet or a new hole in stone add time.
Repair or replace a dripping faucet?
A new cartridge fixes many drips on a good faucet. Builder-grade and older faucets are usually better replaced.
My new faucet doesn't fit my sink holes. What now?
We cover leftover holes or use them for a soap dispenser or filter tap, and drill stone when needed.
Skokie water: how does it affect faucet installation?
Skokie's water source: Treated Lake Michigan water purchased from the City of Evanston. Aerators and cartridges scale faster with harder water.
Skokie building permit for faucet installation: where do I apply?
Permits go through Community Development Department - Building & Inspection Services Division (www.skokiepermits.com), phone (847) 933-8223. When your scope needs one, we prepare the application and schedule the inspections.
What is Skokie doing about lead water lines?
Village runs a lead service line replacement program (covers the public side to the b-box), keeps an interactive service-line material map, and submitted a Draft Lead Service Line Replacement Plan in 2026. Latest tap tests under 5 ppb. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a Skokie-registered contractor for faucet installation?
Many contractors must be registered and insured with the Village each year; permits are not issued unless all listed contractors are registered and insured. We take care of that before work starts.
Do I need a permit for faucet installation in Skokie?
It depends on the scope. Skokie's rule in short: Electrical work and plumbing or electrical system changes need a permit. We handle the permit when one is needed with Community Development Department - Building & Inspection Services Division.
Do you work in my part of Skokie?
Yes. Our crews work across Skokie — ZIP 60076, 60077, 60203 — and nearby Evanston, Park Ridge, Glenview.

Working in Skokie

  • A lot of Skokie kitchens date from the 1950s. We know these layouts well and what is worth keeping.
  • Most Skokie homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development Department - Building & Inspection Services Division handles kitchen permits and pull them for you.

ZIP 60076ZIP 60077ZIP 60203

Kitchen Faucet Installation nearby

Planning a kitchen project in Skokie?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback