No shut-off for the ice maker
Each appliance should have its own shut-off. Then a leak or a fridge swap doesn't mean turning off water to the whole house.
Serving Naperville & nearby Lisle, Warrenville
Appliance Water Line Installation in Naperville, IL
New water lines for refrigerators, ice makers, pot fillers and coffee machines in Naperville, each with its own shut-off.
- Serving Naperville ZIP 60540, 60563, 60564, 60565
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Appliance water line problems we fix in Naperville
Most leaks behind refrigerators start at a saddle valve or a thin plastic tube. We replace those in Naperville homes with a tapped tee, a quarter-turn valve in a recessed box and a line that stands up to being pushed back against the wall.
No water line where the new fridge goes
Buying a fridge with water and ice is easy; getting water to it is plumbing. A dedicated line is run to the space before delivery.
Line run across the floor or through the cabinet
We route appliance lines through the basement or behind the cabinets so nothing is exposed where it can be crushed.
Old saddle valve leaking
Self-piercing saddle valves were the quick fix for decades, and many local codes no longer allow them. We remove the saddle and install a code-approved valve.
Under-sink filter for the fridge water
One filter for the sink and the fridge means fewer cartridges to buy. We run the line from the filter outlet.
Pot filler over the range
We bring water up the range wall for a pot filler and add a stop valve so the faucet can be serviced without shutting off the house.
Ice maker line frozen
Frozen supply tubing can split and leak when it thaws. We move the line away from exterior walls and insulate where it has to pass a cold area.
Thin copper or plastic tubing
Quarter-inch copper kinks when the fridge is moved, and white plastic tubing turns brittle. A braided stainless or PEX line holds up much better.
Included with the install
- Check the supply and the routeA look at your pipes and the appliance location to choose the shortest safe route.
- Remove the old saddle and tubingSaddle valves, old copper coils and plastic tubing removed and the pipe repaired.
- Tie into the supplyA real fitting on the supply pipe instead of a clamp-on valve.
- Run the new lineThe line routed through the floor, the wall or the cabinets and secured along the way.
- Recessed valve boxAn outlet box set into the wall behind the fridge so the valve sits flush and the fridge pushes back fully.
- Dedicated shut-offEvery line gets its own valve so you can shut off one appliance at a time.
- Connector to the applianceA braided stainless connector of the right length so the fridge moves out for cleaning without strain.
Models, parts and fittings
Copper pipeRigid copper where the house is copper or the line runs exposed in a basement.
PEX tubingFlexible supply pipe for the run to the appliance, with few joints in the wall or floor.
Recessed outlet boxesA neat, recessed hookup that keeps the valve off the floor and out of the way.
Quarter-turn valvesBall valves that open or close fully with a quarter turn and don't seize like old multi-turn stops.
Leak sensors and auto shut-offsOptional sensors behind the fridge that alarm or close the valve if they detect water.
Kitchens like yours in Naperville: before and after
Before
Installed
DetailBefore and after: a 1980s two-story in Naperville
This one is a 1980s two-story in Naperville. What we started with: black appliances. What bothered the owners most: a slow drip behind the refrigerator. After: a recessed ice-maker outlet box with a quarter-turn valve and a braided stainless line to the refrigerator. On site this meant tie into the supply, dedicated shut-off, plus connector to the appliance.
Before
AfterBefore and after: a 1980s two-story in Lisle
This one is a 1980s two-story near Oakview. The kitchen as it was: almond appliances. What bothered the owners most: an old ice-maker hookup they didn't trust. The result: a recessed ice-maker outlet box with a quarter-turn valve and a braided stainless line to the refrigerator. The job covered run the new line, dedicated shut-off, plus connector to the appliance.
Appliance Water Line Installation in Lisle →
Before
AfterWarrenville kitchen, 1990s two-story colonial: appliance water line installation
A 1990s two-story colonial near Summerlakes, a typical kitchen for Warrenville. What we started with: white appliances. The reason for the call: an old ice-maker hookup they didn't trust. The result: a recessed ice-maker outlet box with a quarter-turn valve and a braided stainless line to the refrigerator. On site this meant check the supply and the route, tie into the supply, plus dedicated shut-off.
Appliance Water Line Installation in Warrenville →
Before
AfterBefore and after: a two-story colonial from the 1990s in Naperville
Cabinets in light butter yellow with satin brass pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, gray wood-look porcelain plank flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Naperville →
Before
AfterKitchen Cabinet Painting in a 1980s two-story, Naperville
Finished: the same doors sprayed in pale mint green, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Naperville →How the install goes
- Tell us the applianceFridge, ice maker, pot filler or coffee machine, and where it will sit.
- Plan the routeA quick look at the basement, cabinets and wall to plan the run.
- Install and connectWe run the line, set the valve and hook up the appliance the same day.
- Test and clean upLeak test, a flush through the filter and the appliance pushed back in place.
Appliance Water Line Installation questions from Naperville homeowners
What affects the price of a water line installation?
Mostly access and distance. After we see the space, we put the work in a written estimate.
Can you run a water line from the sink to the fridge?
Often, yes. We tee off the cold supply under the sink and route the line through the cabinets or the basement to the fridge.
Can a refrigerator water line be replaced?
Yes. The old line comes out, a proper valve goes in and a new connector runs to the fridge.
Do I need plumber's tape on a fridge water line?
Not on compression fittings. Tape is for threaded pipe joints, and we use it only where the connection calls for it.
How long does a water line installation take?
Usually part of a day for one appliance.
Does Naperville require a licensed plumber for water line installation?
City guide lists plumbers among trades that require a license; plumbing pipe/fixture work needs a permit. Our plumbing connections are made by licensed plumbers.
Naperville building permit for water line installation: where do I apply?
Permits go through Transportation, Engineering and Development (TED) Business Group, Building Permits, phone (630) 420-6100, Option 2. When your scope needs one, we prepare the application and schedule the inspections.
Naperville water: how does it affect water line installation?
Naperville's water source: Lake Michigan water purchased through the DuPage Water Commission from the City of Chicago (emergency wells on standby only). We plan fittings and filters around it.
What is Naperville doing about lead water lines?
City-funded program since 2024 replaces known lead lines at no cost to homeowners; less than 1% of lines known lead. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Do I need a permit for water line installation in Naperville?
It depends on the scope. Naperville's rule in short: Remodeling such as kitchens requires a permit, as do electrical work (minor repairs and low-voltage excepted), plumbing pipe/fixture installation or rearrangement, and structural changes. We handle the permit when one is needed with Transportation, Engineering and Development (TED) Business Group, Building Permits.
Do you work in my part of Naperville?
Yes. Our crews work across Naperville, including Downtown Naperville, Highlands, Tamarack — ZIP 60540, 60563, 60564, 60565 — and nearby Lisle, Warrenville, Bolingbrook.
Working in Naperville
- A lot of Naperville kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Naperville homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in the Naperville Historic District? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Downtown NapervilleHighlandsTamarack
ZIP 60540ZIP 60563ZIP 60564ZIP 60565
Appliance Water Line Installation nearby
Other kitchen services in Naperville
Kitchen Sink Installation & ReplacementNew sinks, undermount and farmhouse styles.
Kitchen Faucet InstallationFaucet swaps and new pull-down faucets.
Garbage Disposal Installation & RepairDisposals unjammed, repaired or replaced, with the drain connected right.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.