Fluorescent box or panel that hums and flickers
Removing a large fluorescent light box often leaves a recess or hole in the ceiling. We close it up and wire new LED lighting in its place.
Serving Hanover Park & nearby Bartlett, Roselle
Kitchen Lighting Installation in Hanover Park, IL
Recessed, pendant and under-cabinet lighting for Hanover Park kitchens, laid out so the counters are bright and wired by a licensed electrician.
- Serving Hanover Park ZIP 60133
- A new look without tearing the kitchen out
- Clean, protected work area every day
Kitchen lighting problems we solve in Hanover Park
Good kitchen light comes down to placement, color and control. We lay out the fixtures before cutting a single hole, pick a warm white that flatters the finishes, and wire everything to switches that make sense in your Hanover Park kitchen.
Dark counters and shadows where you work
Ceiling lights behind you throw your shadow onto the cutting board. Under-cabinet LEDs and recessed lights set nearer the counter edge put light where your hands are.
Adding recessed lights to an existing ceiling
We cut new recessed lights into a finished ceiling, fish the wire from the switch and keep patching to a minimum.
Switches in the wrong place or one switch for everything
When every light is on one switch, you can't set a softer evening light. We split the layers onto separate switches and dimmers.
Light over the sink
We install a downlight or pendant over the sink, often on a separate switch, so dishes don't happen in the dark.
Light that looks too blue or too yellow
If your new LEDs look clinical, the color is likely too cool. We pick fixtures in a warmer range and with good color rendering.
Recessed lights under an insulated attic
Non-IC cans need clearance from insulation. We install fixtures rated for contact so the attic stays fully insulated.
Canned or canless recessed lights?
Canless LED wafer lights are thin and fit under joists, ducts and shallow spaces, while traditional cans take more depth. We use the one that suits your ceiling.
What's included
- Wiring and circuit checkWe confirm the lighting circuit can carry the new fixtures.
- Old fixtures removedFluorescent boxes, old cans and outdated fixtures taken down and wiring made safe.
- Ceiling openings and boxesOpenings cut cleanly and pendant boxes secured to framing.
- Fixtures installedEach fixture hung, leveled and wired.
- Switches and dimmersControls installed where you enter and use the kitchen.
- Testing and adjustmentEvery fixture tested, dimmers checked for flicker and pendants set to height.
- Patching and cleanupAccess holes patched and the kitchen cleaned of dust.
Finishes we offer
Pendants and linear fixturesHanging fixtures that light the island and set the style.
Recessed lightingCanless LED wafers or housings with LED trims, IC-rated where insulation is present.
Accent lightingIn-cabinet lights for glass doors, toe-kick strips and lighting above the cabinets.
Surface and flush fixturesLow-profile LED discs and flush or semi-flush fixtures for shallow or concrete ceilings.
Color temperature optionsLEDs in a consistent, warm color with good rendering.
What the work looks like in Hanover Park homes
Before
AfterHanover Park kitchen, 1970s tract home: kitchen lighting installation
A 1970s tract home near Ontarioville, a typical kitchen for Hanover Park. What we started with: a hanging swag lamp. The reason for the call: a single old light that left the counters in shadow. After: two glass pendants and recessed lights on separate switches. The job covered wiring and circuit check, ceiling openings and boxes, plus testing and adjustment.
Before
AfterBartlett kitchen, 1990s two-story colonial: kitchen lighting installation
The site: a 1990s two-story colonial in Bartlett. The kitchen as it was: two hanging glass pendants. The reason for the call: old lights that no longer matched the kitchen. Finished kitchen: black cage pendants and slim recessed lights on separate switches. Work included wiring and circuit check, old fixtures removed, plus switches and dimmers.
Kitchen Lighting Installation in Bartlett →
Before
AfterHanover Park kitchen, raised ranch: kitchen remodeling
Cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Hanover Park →
Before
AfterHanover Park kitchen, 1970s split-level: kitchen cabinet painting
The same doors sprayed in sage green, new matte black pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Hanover Park →
Before
AfterBefore and after: a 1970s split-level in Hanover Park
New flat slab doors with a thin edge in warm white on the existing boxes, matching face-frame veneer and brushed nickel bar pulls.
Cabinet Refacing in Hanover Park →How your kitchen lighting project goes
- Share photos and plansTell us what feels too dark and what lights you have in mind.
- Layout visitWe check the ceiling type, joists, insulation and wiring, and mark fixture positions.
- Written estimateAn itemized estimate listing fixtures, wiring, switches, patching and any permit.
- Install and testFixtures wired and mounted, dimmers set, ceiling patched and everything tested.
Kitchen Lighting Installation questions from Hanover Park homeowners
How far from the cabinets should recessed lights be?
It depends on cabinet depth and ceiling height. We mark positions so light lands on the work surface.
How high should pendants hang over an island?
The bottom of the fixture usually sits around 30 to 36 inches above the counter, adjusted to your height and sight lines.
What's the best lighting for a small kitchen?
Bright, even ceiling light plus task lighting under the cabinets. We size the fixtures so they don't crowd the room.
Can recessed lights go into a plaster ceiling?
Yes, with the right tools and patience. Older plaster on lath is common in our area, and we work with it often.
Do I need a permit for kitchen lighting?
Sometimes. We confirm the Hanover Park rules and handle the permit when it applies.
Does kitchen lighting project need a Hanover Park building permit, and who files it?
Permits go through Inspectional Services Division (Hanover Park Fire Department), phone 630-823-5860. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a Hanover Park-registered contractor for kitchen lighting project?
All contractors must be registered and bonded with the Village before a building permit is issued; apply via Inspectional Services. We take care of that before work starts.
Do you work in my part of Hanover Park?
Yes. Our crews work across Hanover Park, including Ontarioville — ZIP 60133 — and nearby Bartlett, Roselle, Bloomingdale.
Working in Hanover Park
- A lot of Hanover Park kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Hanover Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Ontarioville
ZIP 60133
Kitchen Lighting Installation nearby
Other kitchen services in Hanover Park
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.