Switches in the wrong place or one switch for everything
A switch on the far side of the room is a daily nuisance. We move or add controls where you walk in.
Serving Bartlett & nearby Hanover Park, Carol Stream
Kitchen Lighting Installation in Bartlett, IL
Recessed, pendant and under-cabinet lighting for Bartlett kitchens, laid out so the counters are bright and wired by a licensed electrician.
- Crews working in Bartlett ZIP 60103, 60120
- Most jobs done in days, with your kitchen still usable
- Samples and a written quote before we start
Kitchen lighting problems we solve in Bartlett
Most kitchens have enough light in the middle of the floor and too little where you actually chop and read recipes. In Bartlett we plan lighting in layers: recessed or ceiling light for the room, under-cabinet strips for the counters, pendants over the island, each on its own switch or dimmer.
Recessed lights under an insulated attic
On a top-floor kitchen, we use IC-rated, airtight recessed lights so the insulation stays in place and heat doesn't escape.
Under-cabinet lighting: hardwired or plug-in?
Hardwired LED strips run from a wall switch with the driver hidden in a cabinet, and the wiring disappears. Plug-in kits are simpler but leave a cord to an outlet.
LEDs that flicker or buzz on the dimmer
If the lights hum or pulse when dimmed, the dimmer and the driver don't agree. We pair them properly.
Light over the sink
The sink is where you need light most and often have the least. A recessed light or small pendant above it solves that.
Canned or canless recessed lights?
Slim wafer fixtures need only a small hole and little room above. Housings with trims are better when you want to change trims later.
Adding recessed lights to an existing ceiling
We cut new recessed lights into a finished ceiling, fish the wire from the switch and keep patching to a minimum.
Pendants over the island
To hang pendants over a new island, the ceiling boxes have to be in the right spots and rated for the weight. We set them, then fine-tune the drop.
What we do on the job
- Lighting layoutA plan for ceiling, task, island and accent light, with fixture positions and switching.
- Old fixtures removedFluorescent boxes, old cans and outdated fixtures taken down and wiring made safe.
- Wire fished to fixtures and switchesNew cable run through the ceiling and walls with minimal access holes.
- Fixtures installedEach fixture hung, leveled and wired.
- Switches and dimmersControls installed where you enter and use the kitchen.
- Testing and adjustmentEvery fixture tested, dimmers checked for flicker and pendants set to height.
- Patching and cleanupAccess holes patched and the kitchen cleaned of dust.
Options to choose from
Dimmers and controlsLED-rated dimmers, smart switches and motion or timer controls.
Recessed lightingDownlights set into the ceiling for even general light.
Pendants and linear fixturesSingle, paired or grouped pendants and long linear lights over islands and peninsulas.
Accent lightingSofter layers that add depth in the evening.
Under-cabinet LEDHardwired strips, puck lights or light bars mounted under the wall cabinets.
Kitchen Lighting Installation before and after — Bartlett homes
Before
AfterBefore and after: a 1980s two-story in Bartlett
A 1980s two-story in Bartlett, a typical kitchen for Bartlett. The kitchen as it was: two hanging glass pendants. What bothered the owners most: dim counters despite the ceiling lights. The result: black cage pendants and slim recessed lights on separate switches. The job covered old fixtures removed, fixtures installed, plus switches and dimmers.
Before
AfterA Hanover Park raised ranch: before and after
This one is a raised ranch in Hanover Park. Before: a hanging swag lamp. What bothered the owners most: one ceiling fixture lighting the whole room. After: two glass pendants and recessed lights on separate switches. On site this meant lighting layout, old fixtures removed, plus wire fished to fixtures and switches.
Kitchen Lighting Installation in Hanover Park →
Before
AfterBartlett kitchen, two-story colonial from the 1990s: kitchen remodeling
What changed: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Bartlett →
Before
AfterBartlett kitchen, 1980s two-story: kitchen cabinet painting
What changed: the same doors sprayed in creamy white uppers and navy lowers, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Bartlett →
Before
AfterBartlett kitchen, 1980s two-story: cabinet refacing
New five-piece shaker doors in sage green on the existing boxes, matching face-frame veneer and satin brass pulls.
Cabinet Refacing in Bartlett →How your kitchen lighting project goes
- Share photos and plansTell us what feels too dark and what lights you have in mind.
- Layout visitAn electrician looks at the space and plans the layers and switching.
- Written estimateA clear written price before any ceiling is cut.
- Install and testFixtures wired and mounted, dimmers set, ceiling patched and everything tested.
Kitchen Lighting Installation questions from Bartlett homeowners
Do I need a permit for kitchen lighting?
Sometimes. We confirm the Bartlett rules and handle the permit when it applies.
Can you install fixtures I already bought?
Yes. We install pendants and fixtures from any store, as long as they're listed for the location and the box can hold them.
How long does recessed lighting installation take?
We give you a schedule with the estimate once we see the ceiling.
Hardwired or plug-in under-cabinet lights?
Hardwired looks cleaner and works from a wall switch. Plug-in is quicker but leaves a cord and uses an outlet.
How much does kitchen lighting installation cost?
A few recessed lights and a full layered plan with pendants and under-cabinet lighting are priced very differently. You get a line-item quote first.
What does Bartlett ask for on electrical work?
Electrical work must be performed by a contractor registered with the Village as a licensed electrical contractor (stated in solar guide). New circuits and wiring are done by licensed electricians.
Do I need a Bartlett-registered contractor for kitchen lighting project?
All contractors must be licensed by the Village of Bartlett (per trade); licensing questions via Main Office 630-837-0800. We take care of that before work starts.
What is the Bartlett building department phone number?
Permits go through Building Division (Planning & Development Services), phone 630-540-5920. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen lighting project in Bartlett?
It depends on the scope. Bartlett's rule in short: Building permits are required for all construction and home improvement projects, whether done by homeowner or contractor; Remodel is a listed permit type. We handle the permit when one is needed with Building Division (Planning & Development Services).
Do you work in my part of Bartlett?
Yes. Our crews work across Bartlett — ZIP 60103, 60120 — and nearby Hanover Park, Carol Stream, Bloomingdale.
Working in Bartlett
- A lot of Bartlett kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Bartlett homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Building Division (Planning & Development Services) handles kitchen permits and pull them for you.
ZIP 60103ZIP 60120
Kitchen Lighting Installation nearby
Other kitchen services in Bartlett
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Kitchen Backsplash InstallationTile backsplashes with clean lines and flush outlets.