Cracked tile or separating plank floor
Tile that cracks and click-lock floors that gap at the seams are often reacting to a subfloor that flexes or isn't flat. We fix the base so the finish floor stops failing.
Serving Glenview & nearby Northbrook, Park Ridge
Kitchen Subfloor Repair in Glenview, IL
Soft, rotted or squeaky kitchen subfloors opened up, rebuilt and made solid in Glenview homes.
- Repairs across Glenview ZIP 60025, 60026, 60062
- We find the cause, not just the symptom
- Parts and labor quoted before work starts
Subfloor problems we fix in Glenview kitchens
Kitchens are where leaks hide: under the dishwasher, behind the fridge water line and below the sink base. Our Glenview carpenters open the floor, trace the moisture to its source, replace what is damaged and reinforce framing where it needs it.
Leak from the refrigerator water line
A weeping ice-maker connection behind the fridge can soak the floor for months. We replace the line or valve and the damaged subfloor under it.
Rot found during a remodel
When tear-out reveals rot, it has to be replaced, not covered. We repair it so the remodel can continue on a solid base.
Soft spot in front of the dishwasher
When the floor gives under your foot at the dishwasher, the plywood has probably absorbed water. The fix is cutting out the soft area back to solid wood.
Floor too thin for tile
Planning porcelain on a floor built for sheet vinyl? We check the thickness and stiffness and build it up as needed.
Damage at a seam from a past repair
A patch that dips at its edge was likely cut between joists without blocking. We open it and support it correctly.
Squeaks and creaks underfoot
Noisy floors are usually loose, not broken. Re-securing the panels to the framing quiets them.
Uneven or out-of-level floor
We measure the floor for flatness and fix high and low spots so the new finish lays flat.
What we check and fix
- Finding and stopping the leakNo new subfloor goes in until the water that ruined the old one is stopped.
- Moisture testingA moisture meter shows how far the wet wood extends and whether the framing is dry enough to close.
- Cutting out damaged subfloorWe remove the damaged area in a clean rectangle with every edge supported.
- Joist inspection and reinforcementWe check the framing beneath and reinforce it when it is damaged or too flexible.
- New subfloor panelsNew panels set flush with the existing floor and fastened with construction adhesive and screws.
- Leveling and flatteningWe level the patch to the rest of the floor and check it with a straightedge.
- Ready for flooringSubfloor solid and clean; we can lay the new floor or coordinate with your flooring installer.
Common fixes and parts
OSB panelsEngineered strand board, used to match an existing OSB floor.
Underlayment layerAn extra plywood or backer layer that stiffens the floor for tile or smooths it for vinyl.
Construction adhesive and subfloor screwsFastening that grips the joists instead of working loose like nails.
Leveling compound and patchCement-based leveler or patch to fill low spots before the finish floor.
Tongue-and-groove plywoodThe usual choice for kitchen subfloors: stiff, holds screws well and tolerates brief wetting better than OSB.
Kitchen Subfloor Repair before and after — Glenview homes
Problem
Fixed
DetailKitchen Subfloor Repair in a two-story colonial from the 1990s, Glenview
This one is a two-story colonial from the 1990s near The Park. The kitchen as it was: 12-inch beige ceramic tile and black appliances. The reason for the call: a floor that gave underfoot by the sink. After: new plywood subfloor glued and screwed down in front of the dishwasher, ready for flooring. On site this meant finding and stopping the leak, new subfloor panels, plus leveling and flattening.
Before
AfterKitchen Subfloor Repair in a 1980s two-story, Northbrook
A 1980s two-story in Northbrook, a typical kitchen for Northbrook. Before: beige sheet vinyl and almond appliances. What bothered the owners most: a soft spot that had opened under the vinyl. After: new plywood subfloor glued and screwed down in front of the dishwasher, ready for flooring. The job covered cutting out damaged subfloor, joist inspection and reinforcement, plus leveling and flattening.
Kitchen Subfloor Repair in Northbrook →
Before
AfterGlenview kitchen, 1950s ranch: hardwood floor repair & refinishing
The oak floor sanded and refinished with a satin clear finish, grain visible and the water marks gone.
Hardwood Floor Repair & Refinishing in Glenview →
Before
AfterKitchen Remodeling in a postwar Cape Cod, Glenview
What changed: cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Glenview →
Before
AfterKitchen Cabinet Painting in a postwar bi-level, Glenview
The same doors sprayed in pale sage, new polished nickel pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Glenview →The repair visit
- Inspect the floorA visit to find the soft area, its cause and how far the damage goes.
- Stop the waterWe repair the source of moisture first.
- Rebuild the subfloorCut out, reinforce, replace and level the subfloor.
- Finish the floorThe finish floor is restored and appliances go back.
Kitchen Subfloor Repair questions from Glenview homeowners
Plywood or OSB for a kitchen subfloor?
In a room with a dishwasher and sink, plywood is the safer choice.
Can you fix squeaks without tearing up the floor?
From an unfinished basement, yes in many cases. Otherwise the best time is when the flooring is up.
How long does subfloor repair take?
Small sections are quick. Framing repairs and new flooring add days.
Do cabinets have to come out?
Most repairs stop at the cabinet face. If the subfloor under a sink base is rotted, that cabinet comes out briefly.
Who should I call for subfloor repair?
You need someone who handles both the structure and the finish floor. We do both.
What is the Glenview building department phone number?
Permits go through Community Development, Inspectional Services Division (Development Center), phone (847) 904-4330. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for kitchen subfloor repair in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.
Working in Glenview
- A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
- Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.
The ParkThe GlenThe Grove
ZIP 60025ZIP 60026ZIP 60062
Kitchen Subfloor Repair nearby
Other kitchen services in Glenview
Hardwood Floor Repair & RefinishingSanding, refinishing and board repairs for kitchen hardwood floors.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.