Serving Glenview & nearby Northbrook, Park Ridge

Kitchen Cabinet & Drawer Repair in Glenview, IL

Sagging doors, broken drawers and swollen sink bases in Glenview kitchens, repaired so the cabinets you have keep working.

  • Repairs across Glenview ZIP 60025, 60026, 60062
  • We find the cause, not just the symptom
  • Parts and labor quoted before work starts

Prefer a callback?

Leave your number and a Glenview cabinet repair carpenter will call you.

Cabinet and drawer problems we repair in Glenview

Most broken cabinets in Glenview kitchens do not need replacing. A stripped hinge, a drawer that drops off its slide or a sink base swollen from a slow leak can be repaired, and we do those repairs with parts that match what you have.

Drawer falls off its track

Old roller slides wear and crack. New full-extension slides, sized to the drawer, make it run straight and stay on.

Drawer box coming apart

If the drawer bottom has fallen out or the corners have spread, we either repair the box or replace it with a sturdier one behind your existing front.

Sagging shelves

If a shelf has dipped in the middle, flipping it rarely lasts. A stiffer shelf or a center support fixes it.

Cracked or split cabinet door

A split panel or broken door joint can often be glued and clamped. When it cannot, we make or source a replacement door in the same style.

Water damage at the dishwasher

A leaking dishwasher can swell the cabinet sides and the toe-kick next to it. We replace the damaged parts and finish them to match.

Door won't stay closed

If a door swings open on its own, the hinge has lost its tension or the cabinet has shifted. We find which and fix it.

Peeling thermofoil or edge banding

Edge banding that has come off can be reapplied. Large thermofoil failures near heat usually mean a new door.

Swollen sink base floor

A slow leak under the sink turns a particleboard cabinet floor soft and puffy. We cut out the damaged bottom and install a new plywood floor.

Where we look first

  • DiagnosisEvery repair starts with finding the cause, whether it is a part, a leak or a shifted cabinet.
  • Checking for active leaksWater damage repairs wait until the leak is stopped; we check the area with you first.
  • Removing damaged partsWe take out only what is damaged and keep the sound parts.
  • Rebuilding the cabinet floorA new plywood floor is cut to fit, supported and sealed in the sink base.
  • Hinges and adjustmentWorn hinges are replaced with matching or upgraded soft-close ones and adjusted for even gaps.
  • Drawer slidesOld slides are replaced in pairs and adjusted to run level and smooth.
  • Drawer box repair or replacementWe repair failing drawer boxes or replace them while keeping your fronts.

Parts we replace

Concealed and soft-close hingesWe match your hinge type or upgrade to soft-close concealed hinges.
Wood fillers, glue and touch-up finishesRepair materials and finish markers blended to the color you have.
Plywood cabinet floorsSink bases get a plywood bottom that will not swell like the original.
Shelving and shelf supportsStiffer shelf panels and matching supports that will not bow.
Mat for the sink baseWe can add a protective tray under the sink to keep small leaks from reaching the wood.

Before and after: kitchens near Glenview

Kitchen Cabinet & Drawer Repair in a 1980s-1990s two-story colonial / tract house — problemProblem
Kitchen Cabinet & Drawer Repair in a 1980s-1990s two-story colonial / tract house — fixedFixed
Kitchen Cabinet & Drawer Repair in a 1980s-1990s two-story colonial / tract house — detailDetail

A Glenview 1990s two-story colonial: before and after

A 1990s two-story colonial near The Grove, a typical kitchen for Glenview. Before: honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs and white cast-iron double sink. What bothered the owners most: a door hanging crooked and a soft cabinet floor. Finished kitchen: the same sink base with a new plywood floor, new soft-close hinges, door aligned. The job covered rebuilding the cabinet floor, hinges and adjustment, plus drawer box repair or replacement.

Kitchen Cabinet & Drawer Repair project in Northbrook, beforeBefore
Kitchen Cabinet & Drawer Repair project in Northbrook, afterAfter

Before and after: a two-story colonial from the 1990s in Northbrook

This one is a two-story colonial from the 1990s near Downtown Northbrook. The kitchen as it was: golden-oak cabinets with oak soffits above and solid-surface integrated sink. The main complaint was a sink base ruined by a slow leak. Finished kitchen: the same sink base with a new plywood floor, new soft-close hinges, door aligned. The job covered removing damaged parts, rebuilding the cabinet floor, plus drawer box repair or replacement.

Kitchen Cabinet & Drawer Repair in Northbrook →
Cabinet Refinishing & Staining project near Glenview, beforeBefore
Cabinet Refinishing & Staining project near Glenview, afterAfter

Cabinet Refinishing & Staining in a postwar bi-level, Glenview

Wood cabinets stripped and refinished in a deep espresso-brown stain, grain still showing.

Cabinet Refinishing & Staining in Glenview →
Cabinet Door & Drawer Front Replacement project near Glenview, beforeBefore
Cabinet Door & Drawer Front Replacement project near Glenview, afterAfter

Cabinet Door & Drawer Front Replacement in a postwar bi-level, Glenview

Finished: new five-piece shaker doors and drawer fronts in light greige with matte black pulls.

Cabinet Door & Drawer Front Replacement in Glenview →
Kitchen Remodeling project near Glenview, beforeBefore
Kitchen Remodeling project near Glenview, afterAfter

Kitchen Remodeling in a 1950s ranch, Glenview

What changed: cabinets in white uppers and dusty blue lowers with matte black pulls, bright white quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Glenview →

How the repair goes

  1. Tell us what's brokenA short description and a couple of photos help us plan the visit.
  2. Visit and diagnosisWe inspect the cabinet and explain what failed and how we will fix it.
  3. RepairMost repairs are done the same visit; special parts may need a second trip.
  4. Test and clean upWe check every repaired part with you and leave the kitchen tidy.

Kitchen Cabinet & Drawer Repair questions from Glenview homeowners

Can you replace drawer slides on old cabinets?
Usually. Even old side-mount slides can be replaced with modern ones of the right length.
How long does a cabinet repair take?
Hinge and slide fixes are quick. Water damage repairs take longer because the area must be dry.
Is it cheaper to refinish or replace cabinets?
Refinishing or painting sound cabinets is usually far less expensive than replacement. Repairs first, finish second.
Can you find matching hinges or hardware?
Often. Many hinge styles are still made. When yours is not, we fit an equivalent that works with your doors.
Do you repair just one cabinet?
We do. A few small repairs can usually be handled in one visit.
Do I need a permit for cabinet repair in Glenview?
It depends on the scope. Glenview's rule in short: Permit required for remodeling/altering a structure, changing the number or location of plumbing fixtures or piping, and new electrical work. We handle the permit when one is needed with Community Development, Inspectional Services Division (Development Center).
Do you work in my part of Glenview?
Yes. Our crews work across Glenview, including The Park, The Glen, The Grove — ZIP 60025, 60026, 60062 — and nearby Northbrook, Park Ridge, Des Plaines.

Working in Glenview

  • A lot of Glenview kitchens date from the 2000s. We know these layouts well and what is worth keeping.
  • Most Glenview homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development, Inspectional Services Division (Development Center) handles kitchen permits and pull them for you.

The ParkThe GlenThe Grove

ZIP 60025ZIP 60026ZIP 60062

Kitchen Cabinet & Drawer Repair nearby

Planning a kitchen project in Glenview?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback