Serving Geneva & nearby Batavia, St. Charles

Oven, Stove & Cooktop Repair in Geneva, IL

Oven not heating, burner won't light or the temperature is off? We repair gas and electric ranges, wall ovens and cooktops in Geneva.

  • Technicians covering Geneva ZIP 60134, 60510
  • Diagnosis first, then a written price for the repair
  • Honest advice when replacing makes more sense

Prefer a callback?

Leave your number and a Geneva range technician will call you.

Oven, stove and cooktop problems we fix in Geneva

Cooking appliances fail in fairly predictable ways. In Geneva we see broken bake and broil elements, igniters too weak to open the gas valve, ovens running hot or cold, surface burners that won't light and self-clean locks that stay shut. Gas valve and igniter work is done by qualified technicians.

Electric burner or element not working

When one burner stays cold while the others work, the fault is in that burner's element, switch or wiring. We trace it.

Electric oven not heating

An element that glowed bright, sparked and went dark has usually failed. Replacing it is one of the most common oven repairs.

Oven running too hot or burning food

A sensor that has drifted or a stuck relay on the control board can make the oven run well above the setting. We test and replace the faulty part.

Oven not heating after self-clean

Cleaning cycles stress the wiring and parts. When the oven dies after one, we test the fuse, sensor and control.

Gas burner clicking but not lighting

If a burner sparks but won't catch, check that the cap is flat and dry. If it still won't light, the igniter or spark module needs a technician.

Gas smell near the stove

A rotten-egg smell is a safety call before it's a repair call. Get everyone out, call the gas company or 911, and call us after they've checked the line.

Self-clean door stuck locked

Self-clean cycles run extremely hot and are hard on the parts. Locks, sensors and fuses can fail during or after one, and we repair them.

Burner clicking nonstop

Igniters that keep clicking after the burner lights often have a wet or failing burner switch. We dry, test and replace the switch or spark module.

What the repair visit covers

  • Temperature testOven temperature checked against the setting with a thermometer.
  • Element and igniter testsBake and broil elements and igniters tested for continuity and current draw.
  • Sensor and control testsWe check what tells the oven when to heat and when to stop.
  • Door, lock and gasket checkWe check that the door seals and the lock releases.
  • Written quoteYou know what failed and the cost before anything is ordered.
  • Repair by qualified techniciansFailed parts replaced; gas valve and igniter work done by qualified technicians.
  • Test and leak checkOven run up to temperature, burners lit and gas connections checked for leaks.

Parts we replace

Controls and sensorsTemperature sensors, control boards, infinite switches and spark modules.
CooktopsGas, electric coil and smoothtop cooktops.
Door and lock partsParts that seal and lock the oven door.
Heating partsBake and broil elements, oven igniters and surface elements.
Wall ovensSingle and double wall ovens, serviced in place or pulled when needed.

Oven, Stove & Cooktop Repair before and after — Geneva homes

Oven, Stove & Cooktop Repair in a 1980s-1990s two-story colonial / tract house — problemProblem
Oven, Stove & Cooktop Repair in a 1980s-1990s two-story colonial / tract house — fixedFixed
Oven, Stove & Cooktop Repair in a 1980s-1990s two-story colonial / tract house — detailDetail

Geneva kitchen, two-story colonial from the 1990s: oven, stove & cooktop repair

This one is a two-story colonial from the 1990s near Mill Creek. The kitchen as it was: white appliances. The reason for the call: an oven that wouldn't heat up. Finished kitchen: the oven with a new bake element installed, heating evenly with the oven light on. On site this meant element and igniter tests, door, lock and gasket check, plus test and leak check.

Oven, Stove & Cooktop Repair project in Batavia, beforeBefore
Oven, Stove & Cooktop Repair project in Batavia, afterAfter

Batavia kitchen, 1990s two-story colonial: oven, stove & cooktop repair

The site: a 1990s two-story colonial in Batavia. Before: black appliances. The reason for the call: an oven that ran hot and burned dinner. After: the oven with a new bake element installed, heating evenly with the oven light on. Work included sensor and control tests, door, lock and gasket check, plus test and leak check.

Oven, Stove & Cooktop Repair in Batavia →
Kitchen Remodeling project near Geneva, beforeBefore
Kitchen Remodeling project near Geneva, afterAfter

Before and after: a two-story colonial from the 1990s in Geneva

What changed: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Geneva →
Kitchen Cabinet Painting project near Geneva, beforeBefore
Kitchen Cabinet Painting project near Geneva, afterAfter

Kitchen Cabinet Painting in a 1980s two-story, Geneva

What changed: the same doors sprayed in cream uppers and walnut-stained lowers, new satin brass pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Geneva →

The repair visit

  1. Tell us the symptomDescribe what the oven or stove is doing and send the model number from the frame or drawer.
  2. Diagnosis visitWe come out and pin down the failed part.
  3. Written quoteParts and labor in writing, with a straight answer on repair versus replace.
  4. Repair and testWe repair it, test it and clean up.

Oven, Stove & Cooktop Repair questions from Geneva homeowners

Which brands do you repair?
We repair most major brands found in local kitchens; ask about yours when you call.
Why is my oven not heating?
The most common causes are a failed bake element or igniter. We test those first, then the sensor and the controls.
Why won't my stove burner light?
A clogged port, a misplaced cap or a wet igniter stops a burner from lighting. If those check out, we look at the igniter and spark module.
Can I use the stovetop if the oven is broken?
Often, yes, if the problem is limited to the oven and there's no gas smell, burning odor or exposed wiring. When in doubt, turn it off and wait for a technician.
Who do I call about a gas smell in Geneva?
Your gas company's emergency line or 911, from outside. Keep the number from your bill somewhere handy.
Do I need a permit for oven and stove repair in Geneva?
It depends on the scope. Geneva's rule in short: A building permit is required before any construction or alteration; separate Kitchen Remodel permit form exists. We handle the permit when one is needed with Building & Zoning Division (Building Division), 109 James St..
Do you work in my part of Geneva?
Yes. Our crews work across Geneva, including Mill Creek — ZIP 60134, 60510 — and nearby Batavia, St. Charles, West Chicago.

Working in Geneva

  • A lot of Geneva kitchens date from the 1990s. We know these layouts well and what is worth keeping.
  • Most Geneva homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in the Geneva Historic District and designated Historic Landmarks? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

Mill Creek

ZIP 60134ZIP 60510

Oven, Stove & Cooktop Repair nearby

Planning a kitchen project in Geneva?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback