Oven not heating after self-clean
The heat of a self-clean cycle can blow a thermal fuse or damage a control or element. If the oven went dead after cleaning, that's where we look first.
Serving West Chicago & nearby Winfield, Carol Stream
Oven not heating, burner won't light or the temperature is off? We repair gas and electric ranges, wall ovens and cooktops in West Chicago.
We repair freestanding and slide-in ranges, wall ovens and cooktops in West Chicago homes, gas and electric. The visit starts with a diagnosis, because a cold oven can be a burned-out element, a weak igniter, a bad sensor or a control board, and each is a different fix.
The heat of a self-clean cycle can blow a thermal fuse or damage a control or element. If the oven went dead after cleaning, that's where we look first.
Self-clean cycles run extremely hot and are hard on the parts. Locks, sensors and fuses can fail during or after one, and we repair them.
A dark display, a flashing time or an error code can come from a power issue, a failing sensor or the control board itself. We test before replacing the board.
If bake works but broil doesn't, the broil element or broil igniter is the likely cause. We test and replace it.
An element that glowed bright, sparked and went dark has usually failed. Replacing it is one of the most common oven repairs.
An oven that never gets up to temperature, or takes forever to preheat, usually has a failing heat source or a sensor out of range. We test both.
Gas ovens use a hot-surface igniter that weakens with age. If it glows and nothing happens, it's not drawing enough current to open the valve; replacing it is a common fix.
If a burner sparks but won't catch, check that the cap is flat and dry. If it still won't light, the igniter or spark module needs a technician.
Problem
Fixed
DetailA 1980s two-story in West Chicago, a typical kitchen for West Chicago. The kitchen as it was: black appliances. What bothered the owners most: an oven that wouldn't heat up. Finished kitchen: the oven with a new bake element installed, heating evenly with the oven light on. The job covered element and igniter tests, sensor and control tests, plus door, lock and gasket check.
Before
AfterThe site: a two-story colonial from the 1990s in Carol Stream. What we started with: white appliances. What bothered the owners most: an oven that ran hot and burned dinner. After: the oven with a new bake element installed, heating evenly with the oven light on. Work included safety and power check, written quote, plus repair by qualified technicians.
Oven, Stove & Cooktop Repair in Carol Stream →
Before
AfterCabinets in soft white with brushed nickel bar pulls, black honed granite counters, a white 2x8 tile in a vertical stack backsplash, gray wood-look porcelain plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in West Chicago →
Before
AfterThe same doors sprayed in deep navy, new brushed nickel bar pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in West Chicago →ZIP 60185
Refrigerator & Ice Maker RepairNot cooling, frost, leaks and dead ice makers diagnosed and fixed.
Dishwasher RepairDraining, cleaning, leaking and door problems found and fixed.
Microwave RepairOver-the-range and built-in microwaves diagnosed and repaired safely.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Call us — we'll check your ZIP, answer your questions and book an in-home estimate.