Serving Geneva & nearby Batavia, St. Charles

Kitchen Cabinet & Drawer Repair in Geneva, IL

Sagging doors, broken drawers and swollen sink bases in Geneva kitchens, repaired so the cabinets you have keep working.

  • Repairs across Geneva ZIP 60134, 60510
  • We find the cause, not just the symptom
  • Parts and labor quoted before work starts

Prefer a callback?

Leave your number and a Geneva cabinet repair carpenter will call you.

Cabinet and drawer problems we repair in Geneva

Most broken cabinets in Geneva kitchens do not need replacing. A stripped hinge, a drawer that drops off its slide or a sink base swollen from a slow leak can be repaired, and we do those repairs with parts that match what you have.

Loose or cracked face frame

Cracked stiles and rails are glued, reinforced and filled, or replaced with matching wood when the damage is too much.

Cracked or split cabinet door

We fix cracked door panels and loose door frames, and touch up the finish so the repair is hard to spot.

Drawer falls off its track

A drawer that drops or jumps the track usually has a broken roller, a bent slide or a loose mounting screw. We replace the slides as a pair.

Drawers that stick or grind

We clean, adjust or replace the slides, and plane the box if it rubs, so the drawer opens smoothly.

Drawer box coming apart

If the drawer bottom has fallen out or the corners have spread, we either repair the box or replace it with a sturdier one behind your existing front.

Door sagging or hanging crooked

Crooked doors are often fixed with a few turns of the hinge screws. When the hinge itself is bent or worn, we replace it with a matching one.

Broken shelf pins and clips

Missing or broken shelf supports leave shelves wobbling or tilted. We replace them with the right size for your cabinets.

Water damage at the dishwasher

We rebuild cabinet sides and kick boards damaged by dishwasher leaks so the edges are flat and sealed again.

Where we look first

  • Checking for active leaksWater damage repairs wait until the leak is stopped; we check the area with you first.
  • Removing damaged partsWe take out only what is damaged and keep the sound parts.
  • Rebuilding the cabinet floorA new plywood floor is cut to fit, supported and sealed in the sink base.
  • Repairing hinge mountsWe rebuild worn hinge locations so doors stay adjusted.
  • Drawer slidesOld slides are replaced in pairs and adjusted to run level and smooth.
  • Finish touch-upWe color-match touch-ups so the repair is as unnoticeable as possible.
  • Testing and cleanupWe open and close every repaired door and drawer, then clean up.

Common fixes and parts

Drawer boxesPlywood or dovetail boxes built to fit behind your existing fronts.
Hinge repair plates and plugsMetal plates and hardwood plugs give stripped hinge spots a solid mount.
Plywood cabinet floorsPlywood holds up to moisture far better than the particleboard most sink bases started with.
Shelving and shelf supportsStiffer shelf panels and matching supports that will not bow.
Mat for the sink baseA waterproof liner on the new floor helps catch drips in the future.

Before and after: kitchens near Geneva

Kitchen Cabinet & Drawer Repair in a 1980s-1990s two-story colonial / tract house — problemProblem
Kitchen Cabinet & Drawer Repair in a 1980s-1990s two-story colonial / tract house — fixedFixed
Kitchen Cabinet & Drawer Repair in a 1980s-1990s two-story colonial / tract house — detailDetail

Kitchen Cabinet & Drawer Repair in a 1990s two-story colonial, Geneva

A 1990s two-story colonial in Geneva, a typical kitchen for Geneva. Before: white thermofoil cabinets peeling at the edges, oak trim and white double sink. The reason for the call: worn, damaged cabinet parts that needed fixing. After: the same sink base with a new plywood floor, new soft-close hinges, door aligned. Work included checking for active leaks, removing damaged parts, plus rebuilding the cabinet floor.

Kitchen Cabinet & Drawer Repair project in St. Charles, beforeBefore
Kitchen Cabinet & Drawer Repair project in St. Charles, afterAfter

St. Charles kitchen, two-story colonial from the 1990s: kitchen cabinet & drawer repair

The site: a two-story colonial from the 1990s in St. Charles. The kitchen as it was: honey-oak cathedral raised-panel cabinets with worn finish near the handles, brass knobs and white cast-iron double sink. The main complaint was a sink base ruined by a slow leak. Finished kitchen: the same sink base with a new plywood floor, new soft-close hinges, door aligned. The job covered removing damaged parts, repairing hinge mounts, plus drawer slides.

Kitchen Cabinet & Drawer Repair in St. Charles →
Cabinet Refinishing & Staining project near Geneva, beforeBefore
Cabinet Refinishing & Staining project near Geneva, afterAfter

Cabinet Refinishing & Staining in a 1980s two-story, Geneva

Finished: wood cabinets stripped and refinished in a deep espresso-brown stain, grain still showing.

Cabinet Refinishing & Staining in Geneva →
Cabinet Door & Drawer Front Replacement project near Geneva, beforeBefore
Cabinet Door & Drawer Front Replacement project near Geneva, afterAfter

Cabinet Door & Drawer Front Replacement in a 1990s two-story colonial, Geneva

Finished: new flat slab doors with a thin edge and drawer fronts in light greige with brushed nickel bar pulls.

Cabinet Door & Drawer Front Replacement in Geneva →
Kitchen Remodeling project near Geneva, beforeBefore
Kitchen Remodeling project near Geneva, afterAfter

Geneva kitchen, two-story colonial from the 1990s: kitchen remodeling

What changed: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Geneva →

How the repair goes

  1. Tell us what's brokenDescribe the problem or send photos so we bring likely parts.
  2. Visit and diagnosisWe inspect the cabinet and explain what failed and how we will fix it.
  3. RepairWe fix what we can right away and return if a part has to be ordered.
  4. Test and clean upWe check every repaired part with you and leave the kitchen tidy.

Kitchen Cabinet & Drawer Repair questions from Geneva homeowners

What affects the cost of cabinet repair?
Scope, materials and any custom parts. We itemize the estimate in writing so you can choose what to fix.
Can you fix a cabinet door that won't close?
Yes. It is usually a worn hinge, a loose mounting or a door that needs adjustment.
Do you repair just one cabinet?
Yes. Bring us a list and we will fix everything in one trip if we can.
Can you add soft-close while repairing?
Often. We can swap hinges and slides for soft-close ones during the repair.
Can water-damaged sink base cabinets be repaired?
Yes, once the leak is fixed. We replace the swollen bottom and any damaged sides with plywood and seal it.
Do I need a permit for cabinet repair in Geneva?
It depends on the scope. Geneva's rule in short: A building permit is required before any construction or alteration; separate Kitchen Remodel permit form exists. We handle the permit when one is needed with Building & Zoning Division (Building Division), 109 James St..
Do you work in my part of Geneva?
Yes. Our crews work across Geneva, including Mill Creek — ZIP 60134, 60510 — and nearby Batavia, St. Charles, West Chicago.

Working in Geneva

  • A lot of Geneva kitchens date from the 1990s. We know these layouts well and what is worth keeping.
  • Most Geneva homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in the Geneva Historic District and designated Historic Landmarks? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

Mill Creek

ZIP 60134ZIP 60510

Kitchen Cabinet & Drawer Repair nearby

Planning a kitchen project in Geneva?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback