Serving Evanston & nearby Skokie, Glenview

Kitchen Sink Installation & Replacement in Evanston, IL

Undermount, drop-in and farmhouse sinks set, sealed and connected by licensed plumbers in Evanston.

  • Installers working in Evanston ZIP 60201, 60202, 60208
  • Hookups by licensed trades where the code calls for it
  • Old unit hauled away on request

Prefer a callback?

Leave your number and a Evanston licensed plumber will call you.

Kitchen sink problems we fix in Evanston

We replace kitchen sinks in Evanston homes from removal to the last leak check: the old bowl out, the opening prepared, the new undermount, drop-in or farmhouse sink set and every connection under it made new.

Original sink in an older Evanston kitchen

In prewar Evanston houses the sink plumbing is often a mix of old metal pipe. We replace the part under the sink so the new bowl connects cleanly.

Condo sink replacement

Your sink drains into a stack shared with neighbors. We work on your unit's side carefully and tell you if anything belongs to the building.

New sink doesn't match the counter cutout

Before you buy, we check the existing cutout and the cabinet width. That avoids a sink that overhangs, shows gaps or won't drop in.

Wanting a farmhouse sink

Converting to a farmhouse sink means changing the front of the sink base and often the countertop cutout. We plan both before ordering.

Sink cabinet floor wet or swollen

If the cabinet bottom has swollen, the leak has been there a while. We find it, replace what failed and protect the base going forward.

Double bowl too small for big pans

Many owners trade a divided sink for one wide basin. We reconfigure the drain for the single outlet and reconnect the disposal.

Dated sink in an otherwise good kitchen

Not every update needs new counters. A new sink and faucet change how the kitchen looks and works in a day.

Strainer or drain leaking

Old strainers loosen and their seals dry out. We install new ones and tighten them so the joint stays dry.

What the install includes

  • Measure the cutout and cabinetWe measure the counter opening, the sink base and the drain position before you pick a sink.
  • Remove the old sinkThe old sink taken out without damaging the counter edge.
  • Prepare the openingCutout cleaned of old caulk and adhesive; enlarged or polished when needed.
  • Set and seal the sinkThe bowl mounted level and sealed to the counter.
  • New strainers and drainNew basket strainers, tailpieces and P-trap assembled to the drain line.
  • Faucet and accessoriesFaucet, sprayer, soap dispenser or deck plate installed.
  • Disposal and dishwasher hookupDisposal remounted to the new flange and dishwasher drain reconnected.

Options to choose from

Enameled cast ironClassic cast iron, often drop-in, that needs a sturdy counter and cabinet.
FireclayA smooth, hard-glazed bowl that needs solid support in the cabinet.
UndermountMounted below a stone or solid-surface counter so you wipe crumbs straight in.
Workstation sinksBowls with a ledge for cutting boards, colanders and drying racks.
Stainless steelEasy-care steel; a lower gauge number means thicker metal.

Kitchens like yours in Evanston: before and after

Kitchen Sink Installation & Replacement in a prewar house — beforeBefore
Kitchen Sink Installation & Replacement in a prewar house — installedInstalled
Kitchen Sink Installation & Replacement in a prewar house — detailDetail

Before and after: a brick bungalow from the 1920s in Evanston

A brick bungalow from the 1920s in Evanston, a typical kitchen for Evanston. The kitchen as it was: stainless double sink under a window. The main complaint was two small bowls where big pots never fit. Finished kitchen: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant remove the old sink, new strainers and drain, plus faucet and accessories.

Kitchen Sink Installation & Replacement project in Skokie, beforeBefore
Kitchen Sink Installation & Replacement project in Skokie, afterAfter

A Skokie 1980s two-story: before and after

This one is a 1980s two-story in Skokie. What we started with: white double sink. The reason for the call: two small bowls where big pots never fit. After: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant set and seal the sink, faucet and accessories, plus disposal and dishwasher hookup.

Kitchen Sink Installation & Replacement in Skokie →
Kitchen Sink Installation & Replacement project in Park Ridge, beforeBefore
Kitchen Sink Installation & Replacement project in Park Ridge, afterAfter

A Park Ridge 1980s two-story: before and after

The site: a 1980s two-story in Park Ridge. The kitchen as it was: white cast-iron double sink. The reason for the call: worn enamel and rust spots in the old bowl. Finished kitchen: a new undermount stainless single-bowl sink with a pull-down faucet. On site this meant remove the old sink, prepare the opening, plus set and seal the sink.

Kitchen Sink Installation & Replacement in Park Ridge →
Kitchen Remodeling project near Evanston, beforeBefore
Kitchen Remodeling project near Evanston, afterAfter

Evanston kitchen, 1920s bungalow: kitchen remodeling

Finished: soft sage-green inset-style cabinets with unlacquered brass hardware, honed white marble-look quartz counters, a white handmade-look square tile backsplash, restored oak strip floor and schoolhouse pendant lights.

Kitchen Remodeling in Evanston →
Kitchen Cabinet Painting project near Evanston, beforeBefore
Kitchen Cabinet Painting project near Evanston, afterAfter

Kitchen Cabinet Painting in a prewar brick bungalow, Evanston

What changed: the same doors sprayed in soft white, new matte black pulls; counters and floor stayed as they were.

Kitchen Cabinet Painting in Evanston →

How the install goes

  1. Pick the sinkSend the model you like or let us suggest a few that fit.
  2. Measure and planWe check the cutout, the cabinet and the drain, and plan any cabinet changes.
  3. Written estimateYou get an itemized estimate for removal, installation and plumbing.
  4. Install and connectThe old sink comes out, the new one is set and a licensed plumber makes the connections.
  5. Cure and testAfter the bond sets, the sink is tested in full use.

Kitchen Sink Installation & Replacement questions from Evanston homeowners

Will Lake Michigan water mark my new sink?
Mineral spots can appear on any sink. Lighter composites and brushed stainless hide them better than dark matte finishes.
Can I keep my countertop when replacing the sink?
Most of the time. The new sink just has to fit the cutout you already have, or the cutout has to be enlarged.
Can a fallen undermount sink be reattached?
Yes. Remounting with new hardware and adhesive is a repair visit, not a reason for new counters.
Who would you call to install a new sink?
For a straight swap, a plumber. If the counter or cabinet changes too, a crew that handles both saves a second visit.
How long does a sink replacement take?
Most sink replacements take a day; cabinet modifications or new counters add time.
Does sink replacement need a Evanston building permit, and who files it?
Permits go through Community Development Department, Building & Development Services (Building & Inspection Services), phone (847) 448-4311. When your scope needs one, we prepare the application and schedule the inspections.
Does Evanston require a licensed plumber for sink replacement?
No separate plumbing license listing on the registration page; hired plumbing contractors must provide proof of licensure and attend inspections. Our plumbing connections are made by licensed plumbers.
What is Evanston doing about lead water lines?
The city has a published service line material inventory (online Water Service Information Map at evanstonleadreplacement.org; call 311). A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Evanston contractor registration: do kitchen contractors need it?
All contractors working in city limits must register with the City; annual fee General Contractor $150, Trade Contractor $125. We take care of that before work starts.
Do Evanston condo associations need to approve sink replacement?
Associations usually set rules for work hours, elevators, deliveries and insurance, and many require approval for plumbing, electrical or structural changes. We provide the certificate of insurance and follow the building's rules.
Do I need a permit for sink replacement in Evanston?
It depends on the scope. Evanston's rule in short: Residential permit applications go through the Citizen Portal; City worksheets signed by the contractors are required for any electrical, plumbing or HVAC work. We handle the permit when one is needed with Community Development Department, Building & Development Services (Building & Inspection Services).
Do you work in my part of Evanston?
Yes. Our crews work across Evanston — ZIP 60201, 60202, 60208 — and nearby Skokie, Glenview, Park Ridge.

Working in Evanston

  • Most Evanston homes are prewar. We work around plaster walls, radiators and out-of-square rooms every week.
  • Condo or townhome? We follow association rules on work hours and elevators and bring the insurance certificate your board asks for.
  • Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

ZIP 60201ZIP 60202ZIP 60208

Kitchen Sink Installation & Replacement nearby

Planning a kitchen project in Evanston?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback