Serving Elmhurst & nearby Villa Park, Lombard

Custom Kitchen Cabinets in Elmhurst, IL

Cabinets designed and built for your Elmhurst kitchen's exact walls, ceilings and appliances, then installed by the same team.

  • Local crews working in Elmhurst ZIP 60126
  • Design, permits and every trade on one schedule
  • A written, itemized estimate before any work

Prefer a callback?

Leave your number and a Elmhurst custom cabinet maker will call you.

When Elmhurst kitchens need custom cabinets

When a kitchen has odd dimensions, tall ceilings or a style worth matching, built-to-fit cabinets are the honest answer. We measure your Elmhurst kitchen in detail, send drawings for approval and handle construction, finishing and installation in one job.

Island that should look like furniture

If the island is the centerpiece of the room, we build it as one: furniture-style base, seating side panels and storage where you need it.

Storage needed beyond the kitchen

We often extend the cabinet work into the mudroom, laundry or dining room so the built-ins match.

Door style or detail you can't find

Beaded inset, a narrow Shaker rail, a specific profile from an old door — we can make the detail you want instead of the closest catalog match.

Finish options too limited

Stock lines offer a handful of colors. Custom work can be painted any color you bring us or stained to match wood elsewhere in the house.

Cabinets that stop short of the ceiling

Tall ceilings make standard uppers look small. We build cabinets that use the full height, with stacked upper doors or glass on top if you like.

Small appliances crowding the counter

An appliance garage with a lift-up or pocket door hides the toaster and coffee maker while keeping them plugged in and ready.

Wide gaps and fillers everywhere

Previous cabinets show three-inch filler strips at every wall and appliance. Built-to-fit boxes close those gaps and gain storage.

A pantry wall that wastes space

Deep pantry cabinets lose cans in the back. We build shallower pantry units, roll-outs or door racks so everything is visible.

What's included

  • Design visit and detailed measuringWe measure every wall, window, ceiling height and appliance opening and talk through how you use the kitchen.
  • Drawings and renderingsElevations and a floor plan show every box, door and drawer before anything is built.
  • Wood, door and finish samplesSample doors and finish boards for picking wood, profile and color in your own light.
  • Building the cabinetsConstruction of each cabinet to its measured size, including pull-outs and dividers.
  • FinishingPaint or stain applied before delivery, so the finish is even and cured when it reaches your house.
  • Tear-out and site prepWe remove the existing cabinets, protect the house and prepare walls for the new boxes.
  • Installation and scribingWe set every box level, fasten it into the framing and fit edges to the walls.

Choices you'll make

Framed and frameless boxesWe build both: framed for a classic look, frameless for modern slab-door kitchens.
Inset vs. full overlay doorsInset doors sit flush inside the frame for a traditional look and need precise fitting; full overlay doors cover the frame for a modern, continuous face.
Maple, cherry, oak and walnutMaple paints and stains evenly, cherry darkens with age, white oak shows a strong grain, walnut is rich and dark.
Painted, stained and two-tone finishesPainted perimeter cabinets with a stained island, or the reverse, is a common custom combination.
Paint-grade constructionFor painted cabinets, maple frames with MDF center panels resist the cracks that solid panels can show at joints.

Before and after: kitchens near Elmhurst

Custom Kitchen Cabinets in a postwar ranch / cape cod / bi-level — beforeBefore
Custom Kitchen Cabinets in a postwar ranch / cape cod / bi-level — in progressIn progress
Custom Kitchen Cabinets in a postwar ranch / cape cod / bi-level — afterAfter

An Elmhurst postwar bi-level: before and after

A postwar bi-level in Elmhurst, a typical kitchen for Elmhurst. Before: dark walnut-stained flush-panel cabinets with brass pulls. The main complaint was catalog-size cabinets with fillers everywhere. Finished kitchen: built-to-fit cabinetry to the ceiling in white uppers and deep green lowers with matte black pulls and light marble-look quartz counters. Work included drawings and renderings, wood, door and finish samples, plus tear-out and site prep.

Custom Kitchen Cabinets project in Villa Park, beforeBefore
Custom Kitchen Cabinets project in Villa Park, afterAfter

Before and after: a 1960s ranch in Villa Park

A 1960s ranch in Villa Park, a typical kitchen for Villa Park. The kitchen as it was: 1970s dark pecan-stained cabinets. The reason for the call: catalog-size cabinets with fillers everywhere. The result: built-to-fit cabinetry to the ceiling in white uppers and deep green lowers with satin brass pulls and warm walnut butcher block counters. The job covered wood, door and finish samples, finishing, plus tear-out and site prep.

Custom Kitchen Cabinets in Villa Park →
Custom Kitchen Cabinets project in Oak Brook, beforeBefore
Custom Kitchen Cabinets project in Oak Brook, afterAfter

Custom Kitchen Cabinets in a 1970s tract home, Oak Brook

A 1970s tract home in Oak Brook, a typical kitchen for Oak Brook. What we started with: dark stained oak cabinets with wide face frames and a scalloped wood valance over the sink. The main complaint was catalog-size cabinets with fillers everywhere. After: built-to-fit cabinetry to the ceiling in white uppers and deep green lowers with satin brass pulls and creamy quartzite-look quartz counters. On site this meant drawings and renderings, wood, door and finish samples, plus building the cabinets.

Custom Kitchen Cabinets in Oak Brook →
Kitchen Cabinet Installation & Replacement project near Elmhurst, beforeBefore
Kitchen Cabinet Installation & Replacement project near Elmhurst, afterAfter

An Elmhurst postwar bi-level: before and after

New cabinets in powder blue with matte black pulls, installed level and ready for light marble-look quartz counters.

Kitchen Cabinet Installation & Replacement in Elmhurst →
Kitchen Design & Layout Planning project near Elmhurst, beforeBefore
Kitchen Design & Layout Planning project near Elmhurst, afterAfter

Elmhurst kitchen, postwar Cape Cod: kitchen design & layout planning

What changed: a new layout with an island, cabinets in two-tone, white quartz counters and black cage pendants and slim recessed lights.

Kitchen Design & Layout Planning in Elmhurst →

From first visit to final walk-through

  1. Design consultationWe measure the kitchen, look at the style of the house and talk about storage and budget.
  2. Drawings and estimateDetailed drawings plus a quote that breaks out cabinets, finishing and installation.
  3. Approval and buildAfter approval we build and finish the cabinets, which often takes several weeks.
  4. InstallationTear-out, then the new cabinets set, scribed, trimmed and paneled.
  5. Final fit and walk-throughDoors and drawers adjusted, punch list finished, and we review the work together.

Custom Kitchen Cabinets questions from Elmhurst homeowners

Are custom cabinets worth it?
For awkward spaces and long-term homes, usually. For a quick update before selling, probably not.
How much do custom kitchen cabinets cost?
It depends on how many cabinets, what they are made of and how detailed they are. Inset doors and specialty interiors cost more than simple full overlay.
Inset or full overlay — which should I choose?
Inset doors look traditional and suit older homes but take precise fitting and give slightly less opening. Full overlay is cleaner, more modern and more forgiving.
Can you match my existing cabinets or trim?
In most cases, yes — bring us a door or point us to the trim, and we make finish samples until it matches.
Can you build panels for panel-ready appliances?
Yes. Send us the model numbers and we build panels and openings to the install specifications.
Does custom cabinet project need a Elmhurst building permit, and who files it?
Permits go through Community Development Department (Building), phone 630-530-3030. When your scope needs one, we prepare the application and schedule the inspections.
Do I need a permit for custom cabinet project in Elmhurst?
It depends on the scope. Elmhurst's rule in short: Elmhurst requires permits for building and construction projects; all permits are applied for through the City's Citizen Self-Service Portal. We handle the permit when one is needed with Community Development Department (Building).
Do you work in my part of Elmhurst?
Yes. Our crews work across Elmhurst — ZIP 60126 — and nearby Villa Park, Lombard, Addison.

Working in Elmhurst

  • A lot of Elmhurst kitchens date from the 1950s. We know these layouts well and what is worth keeping.
  • Most Elmhurst homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Community Development Department (Building) handles kitchen permits and pull them for you.

ZIP 60126

Custom Kitchen Cabinets nearby

Planning a kitchen project in Elmhurst?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback