Serving Crystal Lake & nearby Lake Zurich, Elgin

Kitchen Faucet Installation in Crystal Lake, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Crystal Lake.

  • Serving Crystal Lake ZIP 60014, 60012, 60098
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Crystal Lake licensed plumber will call you.

Kitchen faucet problems we fix in Crystal Lake

We install kitchen faucets in Crystal Lake: the old one off, seized shut-off valves replaced when needed, the new faucet mounted to fit your sink holes and every supply connection checked under pressure.

Hard well water wearing out faucets

Hard well water scales cartridges and spray heads faster. Faucets with easy-to-replace cartridges and nozzles you can wipe clean hold up better.

Worried about lead at the kitchen tap

A new faucet won't fix a lead service line, but it removes an old brass faucet from the equation. Pair it with a certified filter until the line is replaced.

Shut-off valves that won't turn

If the valves under the sink are stuck, we shut the water elsewhere and install new ones before connecting the faucet.

Hole count doesn't match the new faucet

We match the faucet to what's there: one hole, three holes or an undermount counter we can core-drill.

Wanting a touchless faucet

Hands-free faucets have a sensor, a solenoid valve and a battery pack or outlet connection. We mount it all where it's reachable for service.

Old two-handle faucet with a side sprayer

Separate hot and cold handles and a side sprayer that leaks are a common reason to upgrade. A single-handle pull-down does both jobs in one.

Faucet loose or wobbling on the sink

If the faucet turns or tilts when you push the handle, the nut below has backed off. We secure it from inside the cabinet.

Drip from the spout that won't stop

A steady drip with the handle off means the cartridge or valve seat is worn. We swap the cartridge when it's available, or replace the faucet.

What the install includes

  • Check the sink and suppliesA check of the sink holes, shut-offs and clearances so the faucet fits.
  • Shut off and removeThe old faucet and side sprayer taken off without damaging the sink.
  • Replace valves when neededSeized or leaking stops replaced with quarter-turn valves.
  • Pull-down hose and weightSprayer hose connected and its counterweight placed correctly.
  • Supply connectionsNew braided supply lines connected and tightened without strain.
  • Power for touchless modelsControl box mounted and battery pack or plug-in adapter set up.
  • Extra holesUnused holes covered or fitted with a soap dispenser or filtered-water tap.

Options to choose from

Pull-out faucetsA shorter spout with a head that pulls straight out toward you.
FinishesStainless, chrome, matte black and brass finishes, each with its own care.
Deck platesA cover plate that hides extra holes under a single-hole faucet.
Pull-down faucetsA spray head that pulls down into the sink; the most popular kitchen style.
Touchless and touch faucetsHands-free models for messy hands, with a control box below.

What the work looks like in Crystal Lake homes

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Crystal Lake kitchen, 1980s two-story: kitchen faucet installation

A 1980s two-story near Downtown, a typical kitchen for Crystal Lake. The kitchen as it was: solid-surface integrated sink. What bothered the owners most: a leaking faucet with handles that were hard to turn. After: a new single-handle pull-down faucet with a clean caulk line. The job covered check the sink and supplies, shut off and remove, plus extra holes.

Kitchen Faucet Installation project in Elgin, beforeBefore
Kitchen Faucet Installation project in Elgin, afterAfter

Elgin kitchen, 1980s two-story: kitchen faucet installation

This one is a 1980s two-story in Elgin. Before: white cast-iron double sink. What bothered the owners most: an old two-handle faucet that dripped into a worn porcelain bowl. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant pull-down hose and weight, power for touchless models, plus extra holes.

Kitchen Faucet Installation in Elgin →
Kitchen Faucet Installation project in Hoffman Estates, beforeBefore
Kitchen Faucet Installation project in Hoffman Estates, afterAfter

A Hoffman Estates two-story colonial from the 1990s: before and after

A two-story colonial from the 1990s in Hoffman Estates, a typical kitchen for Hoffman Estates. Before: white double sink. The main complaint was a leaking two-handle faucet with a side sprayer. Finished kitchen: a new single-handle pull-down faucet with a clean caulk line. On site this meant check the sink and supplies, pull-down hose and weight, plus supply connections.

Kitchen Faucet Installation in Hoffman Estates →
Kitchen Plumbing Relocation project near Crystal Lake, beforeBefore
Kitchen Plumbing Relocation project near Crystal Lake, afterAfter

Kitchen Plumbing Relocation in a two-story colonial from the 1990s, Crystal Lake

Finished: a new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Crystal Lake →
Kitchen Remodeling project near Crystal Lake, beforeBefore
Kitchen Remodeling project near Crystal Lake, afterAfter

Before and after: a two-story colonial from the 1990s in Crystal Lake

Finished: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.

Kitchen Remodeling in Crystal Lake →

From the old unit to the new one

  1. Pick a faucetChoose one yourself or ask us what fits your sink and holes.
  2. Check the setupA quick look under the sink tells us what else the job needs.
  3. Written estimateYou get the price in writing, including any valve replacement.
  4. Install and testThe faucet goes in, a licensed plumber connects it and we test every joint.

Kitchen Faucet Installation questions from Crystal Lake homeowners

Repair or replace a dripping faucet?
If the faucet is fairly new and parts are available, repair. If it's old, corroded or leaking in several places, replace.
My new faucet doesn't fit my sink holes. What now?
We cover leftover holes or use them for a soap dispenser or filter tap, and drill stone when needed.
Can you install a faucet I already bought?
Of course. Have it on site, and we'll fit it with new supply lines.
What does a faucet installation cost?
We price it after a look at the setup, and it comes in writing.
Can you add a filtered-water faucet?
We install filtered-water faucets alongside the main one, connected to an under-sink filter.
Does faucet installation need a Crystal Lake building permit, and who files it?
Permits go through City of Crystal Lake Community Development - Building Division (ezAPP online permits), phone (815) 356-3605. When your scope needs one, we prepare the application and schedule the inspections.
Is Crystal Lake water hard, and does it matter for faucet installation?
Crystal Lake's water source: Groundwater only: 11 city wells (shallow sand and gravel aquifers 100-250 ft and deep sandstone 1,000-1,450 ft) feeding five treatment plants, with ion exchange softening. Aerators and cartridges scale faster with harder water.
Does Crystal Lake have lead service lines?
Public interactive lead service line inventory map; no lead in source water. A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Does Crystal Lake require a licensed plumber for faucet installation?
Plumbing work requires a copy of the plumber's license, State plumbing contractor registration, and an original plumber's letter of intent (notarized or with corporate seal). Our plumbing connections are made by licensed plumbers.
Do I need a permit for faucet installation in Crystal Lake?
It depends on the scope. Crystal Lake's rule in short: Kitchen alteration handout (Nov 2019) requires a contractor list and two sets of plans showing floor plans, electrical layout, structure and plumbing changes; inspections for rough electrical, plumbing, framing, insulation and final. We handle the permit when one is needed with City of Crystal Lake Community Development - Building Division.
Do you work in my part of Crystal Lake?
Yes. Our crews work across Crystal Lake, including Downtown, Coventry, Four Colonies, The Villages — ZIP 60014, 60012, 60098 — and nearby Lake Zurich, Elgin, Hoffman Estates.

Working in Crystal Lake

  • A lot of Crystal Lake kitchens date from the 1990s. We know these layouts well and what is worth keeping.
  • Most Crystal Lake homes are single-family. We protect floors and driveways and leave the site clean every day.
  • Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.

DowntownCoventryFour ColoniesThe VillagesWedgewoodBurtons Bridge

ZIP 60014ZIP 60012ZIP 60098

Kitchen Faucet Installation nearby

Planning a kitchen project in Crystal Lake?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback