Serving Lake Zurich & nearby Palatine, Buffalo Grove

Kitchen Faucet Installation in Lake Zurich, IL

Pull-down, touchless and two-handle kitchen faucets installed leak-free by licensed plumbers in Lake Zurich.

  • Serving Lake Zurich ZIP 60047
  • Installed level, sealed and tested before we leave
  • Clear price for the install before the visit

Prefer a callback?

Leave your number and a Lake Zurich licensed plumber will call you.

Kitchen faucet problems we fix in Lake Zurich

A kitchen faucet swap is quick when the valves turn, the holes match and the old nuts come loose. In Lake Zurich our licensed plumbers handle the cases where they don't, and leave you with a faucet that doesn't drip at the base.

Hard well water wearing out faucets

Hard well water scales cartridges and spray heads faster. Faucets with easy-to-replace cartridges and nozzles you can wipe clean hold up better.

Old two-handle faucet with a side sprayer

Separate hot and cold handles and a side sprayer that leaks are a common reason to upgrade. A single-handle pull-down does both jobs in one.

Hole count doesn't match the new faucet

We match the faucet to what's there: one hole, three holes or an undermount counter we can core-drill.

Faucet leaking from the base

Water pooling around the base of the spout usually means worn O-rings inside the swivel. On an older faucet, replacement is often the better call.

Leaking from the handle

Leaks at the lever come from the valve inside the body. We replace the cartridge or the whole faucet, depending on its age.

Pull-down sprayer that won't retract

A pull-down head that hangs instead of snapping back usually has a misplaced counterweight or a hose catching under the sink. We fix the routing.

Shut-off valves that won't turn

Seized stops are the most common surprise on a faucet job. New quarter-turn valves make the next repair easy.

Drip from the spout that won't stop

If the spout drips day and night, the seal inside the valve has worn. We repair it or put in a new faucet.

What we hook up and check

  • Check the sink and suppliesWe look at the hole layout, the valves and the space under the sink before you choose.
  • Clean the deckThe sink or counter around the holes cleaned so the new base seals.
  • Replace valves when neededNew shut-off valves if the old ones won't close or weep.
  • Mount the faucetFaucet set with its gasket or deck plate and tightened from below.
  • Supply connectionsNew braided supply lines connected and tightened without strain.
  • Power for touchless modelsSensor faucet wiring and power placed where it can be serviced.
  • Flush and testAerator off, lines flushed of debris, then every joint checked under pressure.

What to pick before the install

Pull-out faucetsA shorter spout with a head that pulls straight out toward you.
Bridge and two-handle faucetsSeparate hot and cold handles on a bridge or widespread base for traditional kitchens.
Deck platesA cover plate that hides extra holes under a single-hole faucet.
Filtered-water and pot-filler tapsA small second faucet for filtered water, or a wall-mounted pot filler by the range.
Touchless and touch faucetsHands-free models for messy hands, with a control box below.

Before and after: kitchens near Lake Zurich

Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — beforeBefore
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — installedInstalled
Kitchen Faucet Installation in a 1980s-1990s two-story colonial / tract house — detailDetail

Kitchen Faucet Installation in a two-story colonial from the 1990s, Lake Zurich

A two-story colonial from the 1990s in Lake Zurich, a typical kitchen for Lake Zurich. Before: solid-surface integrated sink. The main complaint was an old faucet that dripped and was crusted with scale. After: a new single-handle pull-down faucet with a clean caulk line. Work included mount the faucet, supply connections, plus power for touchless models.

Kitchen Faucet Installation project in Palatine, beforeBefore
Kitchen Faucet Installation project in Palatine, afterAfter

Kitchen Faucet Installation in a 1990s two-story colonial, Palatine

This one is a 1990s two-story colonial in Palatine. The kitchen as it was: white double sink. What bothered the owners most: a leaking two-handle faucet with a side sprayer. The result: a new single-handle pull-down faucet with a clean caulk line. The job covered clean the deck, power for touchless models, plus flush and test.

Kitchen Faucet Installation in Palatine →
Kitchen Faucet Installation project in Buffalo Grove, beforeBefore
Kitchen Faucet Installation project in Buffalo Grove, afterAfter

Kitchen Faucet Installation in a 1990s two-story colonial, Buffalo Grove

A 1990s two-story colonial near Green Knolls, a typical kitchen for Buffalo Grove. The kitchen as it was: white cast-iron double sink. What bothered the owners most: handles that leaked and a sprayer that dribbled. The result: a new single-handle pull-down faucet with a clean caulk line. Work included clean the deck, supply connections, plus flush and test.

Kitchen Faucet Installation in Buffalo Grove →
Kitchen Plumbing Relocation project near Lake Zurich, beforeBefore
Kitchen Plumbing Relocation project near Lake Zurich, afterAfter

Before and after: a 1990s two-story colonial in Lake Zurich

A new island with a prep sink, the drain, vent and water lines relocated from the old wall.

Kitchen Plumbing Relocation in Lake Zurich →
Kitchen Remodeling project near Lake Zurich, beforeBefore
Kitchen Remodeling project near Lake Zurich, afterAfter

Kitchen Remodeling in a 1990s two-story colonial, Lake Zurich

Finished: cabinets in deep olive with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a white 3x12 tile in a stacked pattern backsplash, gray wood-look porcelain plank flooring and black cage pendants and slim recessed lights.

Kitchen Remodeling in Lake Zurich →

How the install goes

  1. Pick a faucetChoose one yourself or ask us what fits your sink and holes.
  2. Check the setupWe confirm the hole count, valves and clearances.
  3. Written estimateAn itemized quote for the install and parts before we start.
  4. Install and testThe faucet goes in, a licensed plumber connects it and we test every joint.

Kitchen Faucet Installation questions from Lake Zurich homeowners

Can you add a filtered-water faucet?
Yes. A separate filtered tap can use an existing hole or a new one, with the filter mounted under the sink.
My new faucet doesn't fit my sink holes. What now?
We cover leftover holes or use them for a soap dispenser or filter tap, and drill stone when needed.
Pull-down or pull-out: which should I choose?
Pull-down heads spray straight into the bowl; pull-out heads reach farther toward you. Pick by sink depth and clearance.
Can a handyman install a kitchen faucet?
Our faucet installs are done by licensed plumbers, which matters when a valve or supply line turns out to need replacing.
Should I replace the shut-off valves too?
Often yes. A new faucet on old valves is the most common setup for a future leak.
Do I need a Lake Zurich-registered contractor for faucet installation?
All contractors and subcontractors must register with the Village before work: form, $120 annual fee (Illinois-licensed plumbers exempt), signed $10,000 surety bond. Village pages show differing fee amounts ($110/$120/$125). We take care of that before work starts.
Lake Zurich plumbing code: who can do the plumbing for faucet installation?
Plumbing contractors submit state registrations (055 & 058) and a letter of intent with each permit application. Our plumbing connections are made by licensed plumbers.
Lake Zurich building permit for faucet installation: where do I apply?
Permits go through Building and Zoning Division (Community Services Department), phone 847-540-1696. When your scope needs one, we prepare the application and schedule the inspections.
What is Lake Zurich doing about lead water lines?
Village publishes a Water Service Line Material Inventory and 2025 Lead Tap Sampling Data (documents not read; counts not captured). A filter certified for lead reduction is a sensible step until your line is confirmed or replaced.
Lake Zurich water: how does it affect faucet installation?
Lake Zurich's water source: Deep underground aquifers (wells), chlorinated; ion-exchange treatment; reported hardness is 6-8 grains per gallon (reduced from 14-18 grains per gallon by ion-exchange systems installed 2003-2009). Aerators and cartridges scale faster with harder water.
Do I need a permit for faucet installation in Lake Zurich?
It depends on the scope. Lake Zurich's rule in short: Permit required for remodeling (kitchen, bath, basement). We handle the permit when one is needed with Building and Zoning Division (Community Services Department).
Do you work in my part of Lake Zurich?
Yes. Our crews work across Lake Zurich — ZIP 60047 — and nearby Palatine, Buffalo Grove, Arlington Heights.

Working in Lake Zurich

  • A lot of Lake Zurich kitchens date from the 1980s. We know these layouts well and what is worth keeping.
  • Most Lake Zurich homes are single-family. We protect floors and driveways and leave the site clean every day.
  • We know how Building and Zoning Division (Community Services Department) handles kitchen permits and pull them for you.

ZIP 60047

Kitchen Faucet Installation nearby

Planning a kitchen project in Lake Zurich?

Call us — we'll check your ZIP, answer your questions and book an in-home estimate.

Call now (708) 400-7049
Call (708) 400-7049Callback