1970s laminate with a built-in backsplash
Original 1970s laminate is a good candidate when it's solid. We coat the top and the integral splash together.
Serving Bloomingdale & nearby Roselle, Glendale Heights
Countertop Refinishing & Resurfacing in Bloomingdale, IL
Laminate, cultured marble and tile counters in Bloomingdale resurfaced with a new stone-look or solid-color coating, no tear-out.
- Serving Bloomingdale ZIP 60108
- A new look without tearing the kitchen out
- Clean, protected work area every day
Countertop surfaces we resurface in Bloomingdale
Resurfacing is a coating, not a new countertop, and it works best on tops that are flat, dry and well attached. Our Bloomingdale techs check that first, fix chips and loose edges, then apply a multi-coat system you can choose in a speckled granite look or a plain color.
Chips and loose edges before coating
Edge damage is part of our prep. We fix it, sand it smooth and then coat the whole top including the front edge.
Laminate worn dull or through the pattern
Laminate that has lost its pattern in the work zones can be scuffed, primed and coated so the surface is even again.
A kitchen you plan to sell soon
Before listing, a resurfaced counter is a short project that removes one dated feature buyers notice.
Wanting a stone look without new stone
Speckled and flecked finishes imitate granite closely from normal viewing distance, on the counters you already have.
A previous paint job that is peeling
Peeling DIY coatings come off first. Then we prime for adhesion and build the finish in the right number of coats.
Formica in a color you are tired of
When the laminate is in good shape but the color dates the room, resurfacing changes it in a couple of days without new tops.
Laminate swollen around the sink
If the particleboard has bubbled or gone soft near the sink, a coating won't fix it. That section needs replacing, and we'll say so.
What's included
- Inspection for water damageEvery top is checked for soft or swollen areas, loose edges and movement before we quote a coating.
- Deep cleaning and degreasingThe tops are degreased thoroughly, since contamination is the main reason coatings fail.
- RepairsDamage is fixed and sanded flush before any coating goes on.
- Sanding and primingA sanded profile and a bonding coat give the finish something to hold.
- Base and pattern coatsA solid base color goes on, followed by fleck or mineral layers for a stone look.
- Clear topcoatA durable clear coat seals the color and gives a satin or gloss sheen.
- RecaulkingFresh caulk at the backsplash and around the sink once the finish is dry.
Finishes we offer
Laminate (Formica)The most common base; it coats well when the particleboard underneath is dry and flat.
Stone-look finishesLayered color chips under a clear coat for depth and a natural look.
Solid colorsA single uniform color, often paired with a satin topcoat.
Cultured marbleCast tops in kitchens and vanities that accept a new color after repair and priming.
Resurfacing vs. replacingCoat what is solid and you like the shape of; replace what is swollen, cracked or the wrong layout.
What the work looks like in Bloomingdale homes
Before
AfterCountertop Refinishing & Resurfacing in a two-story colonial from the 1990s, Bloomingdale
A two-story colonial from the 1990s in Bloomingdale, a typical kitchen for Bloomingdale. The kitchen as it was: white Corian-style solid surface with a yellowed seam. What bothered the owners most: a yellowed molded top they wanted to change. Finished kitchen: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. Work included inspection for water damage, base and pattern coats, plus recaulking.
Before
AfterRoselle kitchen, raised ranch: countertop refinishing & resurfacing
The site: a raised ranch in Roselle. Before: white laminate with brown flecks. The reason for the call: laminate worn through near the sink. The result: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. Work included repairs, base and pattern coats, plus clear topcoat.
Countertop Refinishing & Resurfacing in Roselle →
Before
AfterBefore and after: a 1990s two-story colonial in Carol Stream
This one is a 1990s two-story colonial in Carol Stream. The kitchen as it was: white ceramic tile with dark stained grout lines. The reason for the call: dark grout lines across the counters. The result: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. The job covered inspection for water damage, deep cleaning and degreasing, plus base and pattern coats.
Countertop Refinishing & Resurfacing in Carol Stream →
Before
AfterBloomingdale kitchen, 1990s two-story colonial: countertop fabrication & installation
Finished: dark soapstone-look quartz countertops with a tight seam, an undermount sink and a new faucet.
Countertop Fabrication & Installation in Bloomingdale →
Before
AfterBloomingdale kitchen, two-story colonial from the 1990s: kitchen remodeling
What changed: cabinets in pale sage with unlacquered brass knobs and cup pulls, charcoal concrete-look quartz counters, a terracotta-look square tile backsplash, light oak hardwood flooring and black cage pendants and slim recessed lights.
Kitchen Remodeling in Bloomingdale →Day by day
- Photos and a quick checkA few photos tell us the material and whether resurfacing is likely to work.
- Color and finish choiceWe bring sample chips so you can see the finish next to your cabinets and floor.
- Prep and coatingWe prepare the tops and build the coating system in stages.
- Cure, then back to useThe finish needs time to harden; we tell you when light use and full use are safe.
Countertop Refinishing & Resurfacing questions from Bloomingdale homeowners
Can Formica countertops be resurfaced?
Yes. Formica and other laminates are the most common tops we refinish, as long as they're dry, flat and well glued down.
How long does a resurfaced countertop last?
Durability comes down to how well it bonded and how you use the counter. Trivets and cutting boards make a big difference.
Do you refinish bathroom vanity tops?
Yes. Laminate and cultured marble vanities take the same coatings, and they are often done in the same visit as the kitchen.
Does countertop refinishing really work?
On a sound, well-prepped top, yes. Most failures come from poor cleaning, skipped primer or coating over water damage.
Can I cut on or set hot pans on a refinished counter?
No. Use a cutting board and trivets. Knives scratch the topcoat and direct heat can damage it.
Bloomingdale contractor registration: do kitchen contractors need it?
No registration application or fee to work as a contractor in Bloomingdale. Permit submittals need a detailed written scope of work. We take care of that before work starts.
Do you work in my part of Bloomingdale?
Yes. Our crews work across Bloomingdale, including Old Town Bloomingdale — ZIP 60108 — and nearby Roselle, Glendale Heights, Carol Stream.
Working in Bloomingdale
- A lot of Bloomingdale kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Bloomingdale homes are single-family. We protect floors and driveways and leave the site clean every day.
Old Town Bloomingdale
ZIP 60108
Countertop Refinishing & Resurfacing nearby
Other kitchen services in Bloomingdale
Countertop RepairChips, cracks, seams and burns fixed without replacing the top.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Stone Countertop RestorationEtches, stains and dull spots taken out, then the stone resealed.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.