1970s laminate with a built-in backsplash
Many Hanover Park kitchens still have 1970s post-formed laminate. If it's flat and well attached, a new finish is a practical update.
Serving Hanover Park & nearby Bartlett, Roselle
Countertop Refinishing & Resurfacing in Hanover Park, IL
Laminate, cultured marble and tile counters in Hanover Park resurfaced with a new stone-look or solid-color coating, no tear-out.
- Serving Hanover Park ZIP 60133
- A new look without tearing the kitchen out
- Clean, protected work area every day
Countertop surfaces we resurface in Hanover Park
Resurfacing is a coating, not a new countertop, and it works best on tops that are flat, dry and well attached. Our Hanover Park techs check that first, fix chips and loose edges, then apply a multi-coat system you can choose in a speckled granite look or a plain color.
Formica in a color you are tired of
Harvest gold, almond, speckled brown or a busy pattern can be covered with a new coating in a modern stone look or a calm solid color.
Counters in a rental unit
Landlords use resurfacing to refresh worn tops between tenants without the cost and downtime of replacement.
A previous paint job that is peeling
Counter paint from a DIY kit often peels at the sink and edges. We strip the loose coating and apply a proper bonded system.
Wanting a stone look without new stone
Our granite-look coatings use layered color flecks under a clear coat, so the surface has depth rather than a flat paint look.
Scratches, knife marks and stains
We fill cuts and gouges, sand the whole top and lay down fresh coats, which hides most surface damage.
Tile counters with grout that won't come clean
Grout that stays gray no matter how you scrub can be covered. We secure any loose tile, fill the joints and coat the top.
Laminate swollen around the sink
Raised, spongy laminate at the sink means the core is wet. We won't coat over it; new tops are the right fix there.
What the work covers
- Inspection for water damageWe press, tap and look along the sink and seams to confirm the base will hold a finish.
- Masking and ventilationWe tape off and cover everything around the counters and set up airflow for the coatings.
- Deep cleaning and degreasingThe tops are degreased thoroughly, since contamination is the main reason coatings fail.
- RepairsChips filled, edges reglued, loose tiles reset and grout joints leveled.
- Clear topcoatA durable clear coat seals the color and gives a satin or gloss sheen.
- RecaulkingJoints at the wall and sink are sealed again after coating.
- Cure-time and care instructionsWe tell you when you can use the counter lightly and when it reaches full hardness.
Finishes we offer
Cultured marbleMolded marble-look surfaces that can be refinished in place.
Resurfacing vs. replacingCoat what is solid and you like the shape of; replace what is swollen, cracked or the wrong layout.
Stone-look finishesSpeckled or flecked coatings that read like granite or other natural stone.
Ceramic tileA coating turns a gridded tile surface into one continuous finish.
Laminate (Formica)Plastic laminate is resurfaced after scuffing and a bonding primer.
Countertop Refinishing & Resurfacing before and after — Hanover Park homes
Before
AfterCountertop Refinishing & Resurfacing in a 1970s split-level, Hanover Park
This one is a 1970s split-level near Ontarioville. The kitchen as it was: white laminate with brown flecks. The reason for the call: laminate worn through near the sink. The result: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. On site this meant inspection for water damage, repairs, plus clear topcoat.
Before
AfterBefore and after: a two-story colonial from the 1990s in Bartlett
The site: a two-story colonial from the 1990s in Bartlett. Before: white Corian-style solid surface with a yellowed seam. The main complaint was a yellowed molded top they wanted to change. Finished kitchen: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. On site this meant masking and ventilation, deep cleaning and degreasing, plus repairs.
Countertop Refinishing & Resurfacing in Bartlett →
Before
AfterCountertop Refinishing & Resurfacing in a 1980s two-story, Carol Stream
The site: a 1980s two-story in Carol Stream. Before: white ceramic tile with dark stained grout lines. The reason for the call: tile counters with grout that never came clean. After: the same counters resurfaced with a smooth stone-look coating, edges and sink area included. Work included masking and ventilation, deep cleaning and degreasing, plus repairs.
Countertop Refinishing & Resurfacing in Carol Stream →
Before
AfterA Hanover Park 1970s split-level: before and after
What changed: white quartz with soft gray veining countertops with a tight seam, an undermount sink and a new faucet.
Countertop Fabrication & Installation in Hanover Park →
Before
AfterKitchen Remodeling in a 1970s split-level, Hanover Park
Finished: cabinets in white uppers and dusty blue lowers with satin brass pulls, white quartz with soft gray veining counters, a white 2x8 tile in a vertical stack backsplash, hickory luxury vinyl plank flooring and a flush drum fixture and under-cabinet lights.
Kitchen Remodeling in Hanover Park →How the job goes
- Photos and a quick checkA few photos tell us the material and whether resurfacing is likely to work.
- Color and finish choiceWe bring sample chips so you can see the finish next to your cabinets and floor.
- Prep and coatingMasking, cleaning, repairs, priming and the finish coats, usually over one to two days.
- Cure, then back to useThe finish needs time to harden; we tell you when light use and full use are safe.
Countertop Refinishing & Resurfacing questions from Hanover Park homeowners
How soon can I use the counters?
Cure time depends on the coating and the room temperature. Plan on gentle use for the first several days.
Can tile countertops be resurfaced?
Yes. We fill the grout joints, secure loose tiles and coat over the whole surface for a smooth, single finish.
Can you resurface a countertop that is peeling?
Usually, after the loose material is dealt with. A coating can't hold on top of something that's already coming off.
What does countertop resurfacing cost?
It depends on the square footage, the base material, how much repair is needed and the finish you choose. We give a written, itemized estimate after the visit.
Can I cut on or set hot pans on a refinished counter?
Please don't. Cutting boards and hot pads protect the finish and keep it looking right much longer.
Do I need a Hanover Park-registered contractor for countertop resurfacing?
All contractors must be registered and bonded with the Village before a building permit is issued; apply via Inspectional Services. We take care of that before work starts.
Do you work in my part of Hanover Park?
Yes. Our crews work across Hanover Park, including Ontarioville — ZIP 60133 — and nearby Bartlett, Roselle, Bloomingdale.
Working in Hanover Park
- A lot of Hanover Park kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Hanover Park homes are single-family. We protect floors and driveways and leave the site clean every day.
- Live in a historic district? Interior kitchen work is usually not reviewed. We check before anything touches the exterior.
Ontarioville
ZIP 60133
Countertop Refinishing & Resurfacing nearby
Other kitchen services in Hanover Park
Countertop RepairChips, cracks, seams and burns fixed without replacing the top.
Countertop Fabrication & InstallationQuartz, granite and butcher block, templated and installed.
Stone Countertop RestorationEtches, stains and dull spots taken out, then the stone resealed.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.