Burning smell when the fan runs
A hot or burning smell can be grease cooking off the motor or a motor that is overheating. Turn it off and have it checked.
Serving Bartlett & nearby Hanover Park, Carol Stream
Range Hood Repair in Bartlett, IL
Fan dead, lights out or a hood that rattles and roars? We repair range hoods in Bartlett and tell you plainly when replacing makes more sense.
- Technicians covering Bartlett ZIP 60103, 60120
- Diagnosis first, then a written price for the repair
- Honest advice when replacing makes more sense
Range hood problems we fix in Bartlett
Before you buy a new hood, it is worth knowing what actually broke. We look at the motor, the controls, the wiring and the duct behind the hood in Bartlett kitchens, then give you a straight answer on repair versus replacement.
Buttons or touch panel not responding
Touch controls fail from heat, grease and moisture getting into the panel. We test the keypad and the board and replace the faulty one.
Fan stuck on one speed
If the hood only runs on high, or only on low, the speed switch or the control board has usually failed. We replace the part for your model.
Hood that hums but won't spin
A hum with no movement often means a seized motor, a failed start capacitor or a wheel jammed with grease. We free or replace the part.
Fan runs but barely pulls air
Weak suction is often clogged filters, a grease-packed blower wheel or a damper that no longer opens. The motor itself may be fine.
Fan and light both dead
If nothing on the hood responds, we start with the power supply: the breaker, the wiring connection in the hood and the main control board.
Loud rattling or grinding
Rattles usually come from a loose blower wheel, a loose filter or a damper flap. Grinding usually means the motor bearings are wearing out.
Light not working but the fan is
When the fan runs but the lamp won't, the fix is often a new bulb, socket or LED module matched to the hood.
What the repair visit covers
- Fan motor replacementWorn or seized motors replaced with a motor matched to the hood.
- Blower wheel serviceGrease-packed or loose blower wheels cleaned, tightened or replaced.
- Switches and control boardsRocker switches, speed controls, keypads and boards replaced as needed.
- Damper and duct checkWe confirm air can leave the house and the damper closes when the fan stops.
- Filter replacementNew grease or charcoal filters fitted when the old ones are worn out.
- Noise and vibration fixesVibration traced and fixed at the motor, wheel or hood mounting.
- Final testWe run the hood and check airflow before we leave.
Common fixes and parts
Island hoods and insertsInserts inside custom covers, serviced through the filter opening.
FiltersMetal filters catch grease; charcoal filters treat odor in ductless setups.
LightsOlder halogen bulbs or newer LED strips, depending on the hood.
Fan motors and blower wheelsShaded-pole and capacitor motors, squirrel-cage and centrifugal wheels.
Under-cabinet and chimney hoodsThe most common hoods we repair, with fans and controls reachable from below.
Range Hood Repair before and after — Bartlett homes
Problem
Fixed
DetailRange Hood Repair in a 1980s two-story, Bartlett
The site: a 1980s two-story in Bartlett. The kitchen as it was: almond appliances and a fluorescent box light in the ceiling. The reason for the call: an old hood whose fan finally quit. Finished kitchen: the same hood with a new fan motor and working LED lights. Work included fan motor replacement, blower wheel service, plus filter replacement.
Before
AfterBefore and after: a 1990s two-story colonial in Hanover Park
A 1990s two-story colonial near Ontarioville, a typical kitchen for Hanover Park. Before: black appliances and two hanging glass pendants. The main complaint was a loud, rattling range hood. After: the same hood with a new fan motor and working LED lights. Work included fan motor replacement, blower wheel service, plus filter replacement.
Range Hood Repair in Hanover Park →
Before
AfterBefore and after: a 1990s two-story colonial in Carol Stream
The site: a 1990s two-story colonial in Carol Stream. Before: white appliances and a brass chandelier over the nook. What bothered the owners most: a loud, rattling range hood. After: the same hood with a new fan motor and working LED lights. Work included damper and duct check, filter replacement, plus noise and vibration fixes.
Range Hood Repair in Carol Stream →
Before
AfterBartlett kitchen, 1980s two-story: residential kitchen hood cleaning
Finished: the same hood with clean, shining filters.
Residential Kitchen Hood Cleaning in Bartlett →
Before
AfterBefore and after: a two-story colonial from the 1990s in Bartlett
What changed: cabinets in warm taupe with satin brass pulls, warm walnut butcher block counters, a gray beveled subway tile backsplash, light beige 18x18 porcelain tile flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Bartlett →The repair visit
- Describe the problemTell us what the hood does or doesn't do, and send the brand and model from the label inside.
- Diagnosis on siteWe test the hood in place and find the failed part.
- Repair or replaceWe explain what failed and whether the fix is worth it on your hood.
- Fix and testWe repair, reassemble and run the hood before leaving.
Range Hood Repair questions from Bartlett homeowners
Can a range hood be repaired?
Usually, yes. Motors, blower wheels, switches, control boards, lights and dampers are all replaceable parts on most hoods.
Why does my range hood have weak suction?
Start by cleaning the filters. If it is still weak, the wheel, damper or duct is likely restricted.
What bulb does my range hood need?
Hoods use several bulb types. We match the right one, or the LED part, to your model.
Is a noisy range hood worth repairing?
It depends on the cause. Rattles are cheap to fix; a failing motor on an older hood may tip the decision toward replacement.
How much does range hood repair cost?
A bulb or switch and a new motor are very different repairs. We diagnose first and quote in writing.
Do I need a permit for range hood repair in Bartlett?
It depends on the scope. Bartlett's rule in short: Building permits are required for all construction and home improvement projects, whether done by homeowner or contractor; Remodel is a listed permit type. We handle the permit when one is needed with Building Division (Planning & Development Services).
Do you work in my part of Bartlett?
Yes. Our crews work across Bartlett — ZIP 60103, 60120 — and nearby Hanover Park, Carol Stream, Bloomingdale.
Working in Bartlett
- A lot of Bartlett kitchens date from the 1990s. We know these layouts well and what is worth keeping.
- Most Bartlett homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Building Division (Planning & Development Services) handles kitchen permits and pull them for you.
ZIP 60103ZIP 60120
Range Hood Repair nearby
Other kitchen services in Bartlett
Range Hood InstallationUnder-cabinet, chimney, island and insert hoods, ducted to the outside.
Residential Kitchen Hood CleaningDegreased filters, fan, hood interior and the duct you can reach.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.