Dripping grease or water from the hood
We trace drips back to filters, the duct or the roof jack, then clean, seal or replace whatever is letting it through.
Serving Roselle & nearby Bloomingdale, Hanover Park
Range Hood Repair in Roselle, IL
Fan dead, lights out or a hood that rattles and roars? We repair range hoods in Roselle and tell you plainly when replacing makes more sense.
- Repairs across Roselle ZIP 60172
- We find the cause, not just the symptom
- Parts and labor quoted before work starts
Range hood problems we fix in Roselle
Before you buy a new hood, it is worth knowing what actually broke. We look at the motor, the controls, the wiring and the duct behind the hood in Roselle kitchens, then give you a straight answer on repair versus replacement.
Fan stuck on one speed
A fan that ignores the speed buttons often has a worn switch or a failing board, both of which can be replaced.
Fan runs but barely pulls air
Poor airflow usually has a blockage behind it: grease, a stuck damper or a crushed duct. We find it and clear or replace the part.
Light not working but the fan is
A dark light with a working fan is usually a bulb, a socket or the light switch. We swap the bulb type the hood calls for or replace the socket.
Hood that hums but won't spin
When you hear the motor trying but nothing turns, we check the capacitor where there is one and whether the shaft turns freely.
Burning smell when the fan runs
A hot or burning smell can be grease cooking off the motor or a motor that is overheating. Turn it off and have it checked.
Buttons or touch panel not responding
Unresponsive controls can sometimes be cleared by cutting power for a minute; when they can't, we replace the keypad or board.
Fan not working but the light is
If only the fan has quit, we check the switch and control circuit first, then the motor windings and capacitor where the hood has one.
What the repair visit covers
- Fan motor replacementA new motor fitted, wired and balanced on its mount.
- Blower wheel serviceGrease-packed or loose blower wheels cleaned, tightened or replaced.
- Switches and control boardsFaulty controls swapped so every speed and setting responds again.
- Lights and socketsBulbs, sockets, LED modules and light switches replaced to match the hood.
- Damper and duct checkBackdraft dampers freed or replaced, the duct and exterior cap checked for blockage.
- Noise and vibration fixesLoose mounts, filters, wheels and duct connections tightened to stop rattles.
- Final testEvery speed, light and button tested with the hood reassembled.
Parts we replace
Fan motors and blower wheelsThe parts that move air, and the ones most often worn out.
FiltersMetal filters catch grease; charcoal filters treat odor in ductless setups.
LightsIncandescent, halogen and LED lamps, sockets and modules.
Under-cabinet and chimney hoodsWall and under-cabinet hoods serviced in place without removing cabinets.
Island hoods and insertsCeiling-hung and built-in hoods, often with internal or inline blowers.
Before and after: kitchens near Roselle
Problem
Fixed
DetailA Roselle two-story colonial from the 1990s: before and after
The site: a two-story colonial from the 1990s in Roselle. Before: white appliances and a brass chandelier over the nook. What bothered the owners most: a range hood with dead lights and a weak fan. After: the same hood with a new fan motor and working LED lights. Work included fan motor replacement, blower wheel service, plus noise and vibration fixes.
Before
AfterA Bloomingdale 1980s two-story: before and after
The site: a 1980s two-story near Old Town Bloomingdale. What we started with: black appliances and two hanging glass pendants. The main complaint was a hood fan that stopped working. After: the same hood with a new fan motor and working LED lights. The job covered blower wheel service, lights and sockets, plus damper and duct check.
Range Hood Repair in Bloomingdale →
Before
AfterAn Itasca 1980s two-story: before and after
This one is a 1980s two-story near Nordic Park. What we started with: almond appliances and a fluorescent box light in the ceiling. What bothered the owners most: an old hood whose fan finally quit. After: the same hood with a new fan motor and working LED lights. On site this meant fan motor replacement, blower wheel service, plus lights and sockets.
Range Hood Repair in Itasca →
Before
AfterBefore and after: a 1980s two-story in Roselle
What changed: the same hood with clean, shining filters.
Residential Kitchen Hood Cleaning in Roselle →
Before
AfterKitchen Remodeling in a raised ranch, Roselle
Finished: cabinets in light greige with brushed nickel bar pulls, light marble-look quartz counters, a terracotta-look square tile backsplash, black-and-white checkerboard tile flooring and two glass pendants and recessed lights.
Kitchen Remodeling in Roselle →From diagnosis to fixed
- Describe the problemTell us what the hood does or doesn't do, and send the brand and model from the label inside.
- Diagnosis on siteA technician checks the power, controls, motor and damper.
- Repair or replaceWe explain what failed and whether the fix is worth it on your hood.
- Fix and testThe part is replaced and the hood tested on every speed and light.
Range Hood Repair questions from Roselle homeowners
What bulb does my range hood need?
Hoods use several bulb types. We match the right one, or the LED part, to your model.
Can you replace just the fan motor?
Usually. Motor replacement is one of the most common hood repairs.
How much does range hood repair cost?
The part, its availability and the labor to reach it drive the price. We put it in writing before we do the work.
Can a range hood be repaired?
Usually, yes. Motors, blower wheels, switches, control boards, lights and dampers are all replaceable parts on most hoods.
Why does my range hood fan not work but the light does?
The hood has power, so the problem is in the fan side: switch, board or motor. We test them in order.
Do I need a permit for range hood repair in Roselle?
It depends on the scope. Roselle's rule in short: Permit required for projects including bathroom and kitchen remodeling, electrical and plumbing work; also water heater, roof, HVAC. We handle the permit when one is needed with Development & Engineering Services (Building & Zoning).
Do you work in my part of Roselle?
Yes. Our crews work across Roselle — ZIP 60172 — and nearby Bloomingdale, Hanover Park, Schaumburg.
Working in Roselle
- A lot of Roselle kitchens date from the 1970s. We know these layouts well and what is worth keeping.
- Most Roselle homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Development & Engineering Services (Building & Zoning) handles kitchen permits and pull them for you.
ZIP 60172
Range Hood Repair nearby
Other kitchen services in Roselle
Range Hood InstallationUnder-cabinet, chimney, island and insert hoods, ducted to the outside.
Residential Kitchen Hood CleaningDegreased filters, fan, hood interior and the duct you can reach.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.
Cabinet RefacingNew doors and fronts on your existing cabinet boxes.