1960s hood on an old duct
Original 1960s ventilation was sized for a different era of cooking. A modern hood often needs a larger duct and a new exterior cap.
Serving Wood Dale & nearby Itasca, Elk Grove Village
Range Hood Installation in Wood Dale, IL
We install under-cabinet, wall chimney, island and insert range hoods in Wood Dale, ducted outside wherever the house allows.
- Serving Wood Dale ZIP 60191
- Installed level, sealed and tested before we leave
- Clear price for the install before the visit
Range hood installs we handle in Wood Dale
Most kitchen ventilation complaints come from the install, not the hood: a duct that is too small, a long run full of elbows, or a fan that blows grease into the cabinet above. Our Wood Dale installers set the hood, the duct and the exterior cap as one system.
Custom hood cover that needs an insert
Built-in hood covers look like cabinetry, but the insert inside still has to be sized and ducted properly. We handle that part.
Island hood over a new island cooktop
Island cooktops lose smoke to cross drafts. We mount a ceiling hood sized for the cooktop and run the duct across or between the joists to the outside.
Old hood that only recirculates
A hood that blows air back into the room through a charcoal filter catches some grease but leaves heat, moisture and smoke inside. When a duct route exists, we convert it to vent outdoors.
High-CFM hood and makeup air
Bigger isn't always better. Above a certain airflow, many codes call for makeup air, so we size the hood to what you actually cook.
Swapping an over-the-range microwave for a hood
Microwave vents capture far less than a real hood. We remove the microwave, check the duct and install a hood that fits the space.
Gas range that needs stronger ventilation
Gas burners add combustion byproducts and heat to the air, so a gas range usually calls for more capacity than an electric cooktop. We size the fan and duct together.
Flexible foil duct behind the old hood
Flex duct sags, collects grease and is a poor choice for a kitchen exhaust. The new run goes in as rigid metal pipe, taped and supported.
What we hook up and check
- Site check and sizingCooktop width, fuel type and duct path are checked before a model is chosen.
- Permit and approvalsPermits, condo approvals and any makeup-air requirement are confirmed up front.
- Blocking and mountingMounting points set at the height in the maker's instructions.
- Duct runRigid smooth metal duct sized to the hood outlet, joints sealed with foil tape and supported.
- Wall cap or roof jackThe duct ends outside under a damper that closes when the fan is off.
- Electrical connectionPower brought to the hood and connected per the maker's instructions.
- Test and cleanupWe run the hood, confirm the damper opens and closes, and haul away the old unit.
Models, parts and fittings
Inserts and linersThe working core of a decorative hood, ducted like any other hood.
Ducted vs recirculatingVenting outdoors removes heat and moisture; ductless filtering is the fallback when no duct path exists.
Under-cabinet hoodsThe most common style, tucked under the upper cabinet above the range.
Island hoodsCeiling-hung hoods for cooktops in an island, usually wider than the cooking surface.
Wall chimney hoodsWall-mounted hoods with a tall cover, often used where there is no cabinet above the range.
Kitchens like yours in Wood Dale: before and after
Before
Installed
DetailBefore and after: a two-story colonial from the 1990s in Wood Dale
This one is a two-story colonial from the 1990s in Wood Dale. The kitchen as it was: black appliances and golden-oak cabinets with oak soffits above. The reason for the call: an old hood that was loud and pulled very little air. Finished kitchen: a new stainless chimney range hood ducted to the outside. Work included wall cap or roof jack, electrical connection, plus test and cleanup.
Before
AfterItasca kitchen, 1980s two-story: range hood installation
This one is a 1980s two-story near Nordic Park. Before: white appliances and white thermofoil cabinets peeling at the edges, oak trim. The reason for the call: a recirculating hood that left the kitchen smoky. The result: a new stainless chimney range hood ducted to the outside. Work included wall cap or roof jack, electrical connection, plus test and cleanup.
Range Hood Installation in Itasca →
Before
AfterBefore and after: a 1950s ranch in Wood Dale
Cabinets in soft white with unlacquered brass knobs and cup pulls, warm walnut butcher block counters, a blue handmade-look tile backsplash, warm oak luxury vinyl plank flooring and recessed lights and under-cabinet LED strips.
Kitchen Remodeling in Wood Dale →
Before
AfterA Wood Dale 1950s ranch: before and after
What changed: the same doors sprayed in powder blue, new satin brass pulls; counters and floor stayed as they were.
Kitchen Cabinet Painting in Wood Dale →How the install goes
- Photos and modelTell us what you cook on and show us the space; a model number helps.
- Duct route and sizingOn site we size the hood, pick the duct route and check permits and makeup air.
- Written estimateAn itemized estimate for the hood install, duct, exterior cap, wiring and any permit.
- Install and testWe install, test the airflow and clean up the same day in most cases.
Range Hood Installation questions from Wood Dale homeowners
How many CFM does my range hood need?
There's no one answer. Gas, pro-style burners and heavy searing push it up; induction and light cooking need less.
Can I duct a hood outside in my Wood Dale condo?
Many condo boards must approve any exterior penetration. If it's not allowed, a recirculating hood is the option.
Do I need a permit to install a range hood?
Replacing a hood in place is usually simple; new ductwork and roof or wall holes are what bring permits into play.
Can I install a range hood myself?
Some do. The hard parts are cutting through the exterior, sealing the cap and sizing the duct, and those are the parts that cause leaks and weak airflow.
Do I need makeup air for a big hood in Wood Dale?
Possibly. High-CFM hoods can trigger a makeup-air requirement under local code. We check with the village before you pick the hood.
Do I need a Wood Dale-registered contractor for range hood installation?
All contractors (general, HVAC, electrical, plumbing, roofing, etc.) must register with the City before a permit is issued. Requires Certificate of Insurance ($2,000,000 public liability) naming the City, state license/IDPH registration if applicable. We take care of that before work starts.
Does range hood installation need a Wood Dale building permit, and who files it?
Permits go through Community Development Department (https://my.wooddale.com), phone 630-766-5133. When your scope needs one, we prepare the application and schedule the inspections.
Does Wood Dale require a licensed electrician for range hood installation?
Electrical contractors must register with the City (insurance certificate, fee/bond per fee schedule); city adopts the 2014 National Electrical Code with local amendments. New circuits and wiring are done by licensed electricians.
Do I need a permit for range hood installation in Wood Dale?
It depends on the scope. Wood Dale's rule in short: A permit is required for any alteration or repair of a building. We handle the permit when one is needed with Community Development Department.
Do you work in my part of Wood Dale?
Yes. Our crews work across Wood Dale — ZIP 60191 — and nearby Itasca, Elk Grove Village, Addison.
Working in Wood Dale
- A lot of Wood Dale kitchens date from the 1960s. We know these layouts well and what is worth keeping.
- Most Wood Dale homes are single-family. We protect floors and driveways and leave the site clean every day.
- We know how Community Development Department handles kitchen permits and pull them for you.
ZIP 60191
Range Hood Installation nearby
Other kitchen services in Wood Dale
Range Hood RepairFans, motors, switches, lights and rattles on kitchen range hoods.
Oven, Range & Cooktop InstallationGas and electric ranges, wall ovens and cooktops, safely connected.
Kitchen Electrical WorkNew circuits and outlets for kitchen appliances.
Kitchen RemodelingFull kitchen remodels, from layout to last cabinet pull.
Kitchen Cabinet PaintingFactory-smooth painted cabinets without replacing them.